Home Companies Lanry Instruments (Shanghai) Co., Ltd.

Chemical Industry Handheld Ultrasonic Flow Meter Wide Bi - Directional Flow Range

Active Member

Contact Us

[China]

Address: 8 Floor, Block C, Bldg 5, No.2800 Jiuxin Rd., Songjiang District, Shanghai,201612, China

Contact name:Tracy Xu

Lanry Instruments (Shanghai) Co., Ltd.

Chemical Industry Handheld Ultrasonic Flow Meter Wide Bi - Directional Flow Range

Country/Region	china
City & Province	shanghai shanghai

Product Details

Transit-time Handheld Low Cost Ultrasonic Flow Meters for chemical industry

Transit-time Handheld Low Cost Ultrasonic Flow Meters is used for the water flow rate in the

full Filled Pipes. This meter is mainly used to measure water and waste water industry , Chemical industry and so on.

As the meter use the ultrasonic wave through air do the measurement with a non-contact method.

TF1100-CH Handheld Ultrasonic Flow Meter works on the transit-time method. The clamp-on ultrasonic transducers (sensors) are mounted on the external surface of the pipe for non-invasive and non-intrusive flow measurement of liquid and liquefied gasses in fully filled pipe. Three pairs of transducers are sufficient to cover the most common pipe diameter ranges.

User can use hand to hold as well as to operate the flow meter main unit. This flexible and easy to use flow meter is the ideal tool for the support of service and maintenance activities. It can also be used for the control or even for the temporary replacement of permanently installed meters.

Transit-time Handheld Low Cost Ultrasonic Flow Meters for chemical industry Features:

1. Wide bi-directional flow range of 0.01 m/s to 12 m/s. Wide liquid temperature range: -35℃~200℃.

2. Data logger function.

3. 14 hours battery (rechargeable), back-lit 4 lines display.

4. Lightweight and easily transportable in box.

5. Can be used for mobile measurement, flow rate calibration, data comparing, meters running status checking.

6. Works reliably in both clean and somewhat dirty liquids with turbidity<10000ppm.

7. Non-invasive transducers.

Applications:

Water and waste water industry - hot water, cooling water, potable water, sea water etc.)

Petrochemical industry

Power supply- nuclear power plants, thermal & hydropower plants), heat energy boiler feed water.etc

Chemical industry -chlorine, alcohol, acids, .thermal oils.etc

Metallurgy and mining applications

Refrigeration and air conditioning systems

Food , beverage and pharmaceutical industry

Mechanical engineering and plant engineering-pipeline leak detection, inspection, tracking and collection.

General

● Service and maintenance

● Replacement of defective devices

● Support of commissioning process and installation

● Performance and efficiency measurement

- Capacity measurement of pumps

- Monitoring of regulating valves

- Evaluation and assessments

Specifications: Transmitter

Measurement principle	Ultrasonic transit-time difference correlation principle
Flow velocity range	0.01 to 12 m/s, bi-directional
Resolution	0.25mm/s
Repeatability	0.2% of reading
Accuracy	±1.0% of reading at rates >0.3 m/s);±0.003 m/s of reading at rates<0.3 m/s
Response time	0.5s
Sensitivity	0.003m/s
Damping of displayed value	0-99s(selectable by user)
Liquid Types Supported	both clean and somewhat dirty liquids with turbidity <10000 ppm
Power Supply	AC: 85-265V Up to 14 h with fully charged internal batteries
Operating temperature	-20℃ to +60℃
Housing material	ABS( UL 94HB)
Display	4 line×16 English letters LCD graphic display, backlit
Units	User Configured (English and Metric)
Security	Keypad lockout, system lockout
Size	27312542mm
Weight	0.5kg

Specifications: Transducer

Degree of protection	IP65 according to EN60529.(IP67 or IP68 Upon request)
Suited Liquid Temperature	Std. Temp.: -35℃~85℃ for short periods up to 120℃
Suited Liquid Temperature	High Temp.: -35℃~200℃ for short periods up to 250℃
Pipe diameter range	20-50mm for type S, 40-1000mm for type M, 1000-6000mm for type L
Transducer Size	Type S 52(h)28(w)26(d)mm
	Type M 60(h)34(w)33(d)mm
	Type L 80(h)40(w)42(d)mm
Material of transducer	Aluminum for standard temp. sensor, and peek for high temp. sensor
Cable Length	Std: 5m

Data sheet download TF1100-EH transit-time handheld ultrasonic flowmet...

Manual Download TF1100-EH transit-time handheld flowmeter Manual (...

Dimensional Sketches

Packing & Delivery

Transit-time Handheld Low Cost Ultrasonic Flow Meters for chemical industry

With years of export experience along with excellent quality, advanced services and competitive prices, Lanry has won numerous customers' trust and support. With years of export experience along with excellent quality, advanced services and competitive prices, Lanry has won numerous customers' trust and support.