|
[China]
Trade Verify
Address: Room 501, Tower C, Lanhai Officec, No. 13, Changyi Road, Wuhou District, Chengdu, Sichuan, China
Contact name:Patrick Wang
Chengdu CQMEC Machinery & Equipment Co., Ltd |
|
Verified Suppliers
|
|
|
Fire Hose Branch Nozzle Aluminum Alloy
Fire water nozzle is a water jetting tool for extinguishing fire. When connected with the water hose, it will spray dense and substantial water. It has the advantages of long range and large water volume.This type nozzle is made according to American Customers
Specification of American Type Double Nozzle
| Size | Water outlet | A(mm) | B(mm) |
1 1/’’ BSP(In & Out) | Φ9 | 415 | 150 |
1 3/4’’ BSP(In & Out) | Φ12 | 425 | 150 |
2’’ BSP (In & Out) | Φ12 | 425 | 150 |
| M56*4(In & Out) | Φ12 | 420 | 150 |
Application of Fire Nozzle
1.Open the fire hydrant door and take out the water hose and water gun.
2.Check whether the water hose and connector are in good condition. If they are damaged, it is prohibited to use them.
3.Lay the water hose towards the fire site, and pay attention to avoid twisting.
4.Connect the water hose with the fire hydrant, insert the connection buckle into the chute accurately and tighten it clockwise.
5.After the connection is completed, at least two operators shall hold the water gun tightly and aim at the fire source (it is strictly prohibited to touch people to avoid high-pressure injury). The other operator shall slowly open the fire hydrant valve to the maximum, and spray water at the root of the fire source to extinguish the fire until the fire is completely extinguished.
Other Recommended Products
