Access Control Automatic Stainless Steel Tripod Turnstile Gate
1. GB 304 stainless steel sheet metal forming, beautiful, durable
2. Dimensions : 420 × 330 × 990 (mm)
3. Channel width: less than 550 (mm);
4. Brake lever steering : one-way, two-way (optional)
5. Control mode: manual/ automatic (optional)
6. Can mount a variety of control devices: metal security gate/ IC
card/ ID card/ card/ barcode card, etc.
7. Working environment: indoor(outdoor use shall stand awning)
8. Ultra quiet design: Mechanical design using third-generation
silent, smooth operation no noise impact;
9. Super bright passage indicator: directional design of ultra-
bright LED lights to indicate a more eye-catching ;
10. Automatic access function: the reader automatically run after
the brake lever to unlock certain angle, automatically bring people
through the gates ;
11. Multiple modes of function: by setting the switch can be set to
the gates normally open , normally closed two modes of operation ;
12. Access memory function: After several pedestrians card, access
gates opportunity to remember the number, until the entire passage
of pedestrians closing;
13. Power off the pole, the power from the bar features: gates
automatically after power brake lever to facilitate evacuation fall
to meet fire safety requirements ; ( automatic type )
14. Anti-collision function: no credit card pedestrian push the
brake lever , lock gates ;
15. Remote control: RS485 card can be accessed by computer or TCP
to RS485 remote control gates ;
16. Automatic reset function: by credit card is not specified ,
within the time gates back in situ cancel access .
Function Features
After open permission, if the people does not pass within 5
seconds, the turnstile will be automatically closed and the time can be set
People cannot pass in the opposite direction;
Anti-trailing,Only one person is allowed to pass when one open
permission ;
Arm will fall automatically when power failure;
Continuous authorization can be set to pass, and the equipment will
be closed only after the corresponding number of personnel pass.
Standard electrical signal input, can be used with a variety of
access control equipment
1.Power supply:AC220V±10%,50±10Hz
2.pass direction: one-way or two-way
3.Relative humidity,≤90% no condensation
4.open/ close time: not adjustable
5.Power-on system startup time: 1 second
6.Number of passers:30 persons/minute
7.Normal service life: 3 million times
8.Chassis material: standard 304 stainless steel
9.standard channel width:550m
10.The shape of the chassis can be customized according to
requirements
| Chassis | 304 stainless steel |
Reliability of the core | 3million, no fault |
Weight | 35Kg(bridge type) |
Width of lane | 550(mm) |
Driving force of arms | 3Kg |
Driving mode | digital |
