Alarm Light Socket Sliding Gate Door Motor Automatic Warm Up Reversing On Obstacle

Alarm Light Socket Sliding Gate Door Motor Automatic Warm Up Reversing On Obstacle

Debugging

1. Three means to your safety: loop detector, photocell, crash proof. When the gate is opening, these three functions can not be applied. When the gate is closing and meets some obstacles, the direction lights of the opening and closing limit are on at the same time and then turn to opening limit. When the signal of the infrared photocell is cut, the gate will turn to the opening limit and open till the direction light of the opening limit is on all the time. When there is a signal to the loop detector, the gate will open for 10 seconds and then close automatically. You can adjust the crash proof sensitivity on the control panel. Rotate the clockwise, the sensitivity will be higher.

2. Temperature control function, when the system detects that the ambient temperature is below 0 degrees, the motor will heat automatically.

Maintain
I. The antifreeze lubricant oil has been applied to the sliding gate operator. There is no need to add the oil before using.
2. After using the sliding gate operator for one month, please check the antifreeze lubricant oil Ifit needs to be changed, please change the oil with the same type. Then check the oil every year Ifthe oil turns bad, change the oil with the same type.
3. After using the gate operator for some time, please check if any parts are loose. If they turn loose, please tighten them.

OUR SERVICES