Shenzhen Wejoin Mechanical & Electrical Co. |
Verified Suppliers
|
|
easy operator heavy duty ac motor automatic gate motor sliding
Functions & Features
1) Magnetic switch limit
2) Aluminum alloy Gear Box
3) Thermal protection at 125°c built in motor winding
4) In case of power failure, the gate can be opened and closed manually after release clutch
5) Protection class IP44
6) Operating environment temperature -20°c ~ + 50°c
7) Option: Photocell, Alarm Lamp
Electronic Data
Model | KMP202 |
Soft start | YES |
Stop on obstacle (sensitivity adjustable) | YES |
Auto warming-up (at freezing temperature) | YES |
Remote control | 418MHz (50m, approx) |
Wire control | Available |
Auto closing | YES |
Vehicle loop detector socket | YES |
Photocell socket | YES |
Alarm light socket | YES |
Motor base and it's installation
1. Motor base installation: set the installation position of the
base tray according to the size of the motor and the height of the
installation position of the gear rack. Then Embed the bolts in
advanced or use the expansion bolts to embed the base into the
cement foundation.
2. If the gear rack has already been installed, fix the motor to th
base and turn the clutch with the clutch key to the off position,
then make the gear of the motor suit right to the gear rack, then
the position of the base can be set. Take off the motor and fix the
base.
Rack installation
Make the gear of the gear rack towards the floor. Make the gear of
the rack fit the gear of the motor. Fasten the gear rack to the
door with the screws. Push the gate and make it move the whole
route Fasten the gear to the gate after assuring that the gate run
smoothly the whole route.
Rack is usually installed piece after piece. To avoid dithering or
blocking, please adjust the gap of the gear rack. We suggest one
way( refer to Fig-3): fix up the rack1 and rack after adjusting the
two racks with the small adjusting rack.