Cemented Carbide Disc Cutter Slotter Blade Cutting Paper Hard Alloy 200*122*1.3mm

cemented carbide disc cutter slotter blade cutting paper hard alloy 200*122*1.3mm

Applications:

Tungsten carbide round disc blade is suitable for cutting the slitting corrugated board/paper

 Applications:

tungsten carbide blade is mainly used for cutting paper in printing industry
tungsten carbide knife products require high precision, no glitches, maximum abrasion resistance.
we are using HIP sintered and fine grinding, polishing plating to reduce frictions when cutting, improved the accuracy and speed slitting greatly, tool life extended!

1.Mix with Cobalt powder for ball milling,about 2-3 days to be finished

2.​ 3 sets ,All the round rods in the ball mills should be made of fine grain tungsten carbide rods,glue mixing is usually mix the rubber, make the blade sometimes mix

3.The choice of pressing machinery depends on the surface area of the product to be pressed

surface area multiplied by 0.8 is pressure value . 1000 tons means that the maximum pressure

of 1000 tons products can be pressed, and each machine can adjust the appropriate pressure.

4.First,we will do degumming then we’ll use HIP sintering or vacuum sintering.we have 10 vacuum sintering furnace and 2 HIP furnace

We will use testing tablet when sintering to test the raw material performance .

For carbide antiskid stud,they are putting inside vaccum sintering furnace by degarmming and sintering together

For small products,normally under 200 gram,we will use degumming and sintering together in HIP sintering furnace

If for big products,for example carbide dies,plates ,Grade ML serious,we should do degumming firstly then use HIP sintering furnace

5.Our order,normally is blanks or ground

For customer’s grinding tolerance, we will grind/machine outside diameter ,inside diameter /the sharp edge and so on

So we will use surface grinding machine,centerless grinding machine ,cylindrical grinding machine

About package :

1 we will make sure that your tungsten carbide disc cutter clean before package.
2 rubber strip wrap sharp cutting edge to avoid edge broken.
3 put into plastic bag and styrofoam box to keep tungsten carbide disc cutter steady when express deliver
4 add plastic foam into inner box for the whole tungsten carbide disc cutter for sweet protection.
5 we will make export standard strong cartonn or plywood case package according to your needs.

Feel free to contact me if any needs:

Whatsapp/wechat/phone:008618593402651

Facebook:Xiao Aimee

zhuzhou mingri cemented carbide co. ltd

Email:mr009@mrcarbide.com