|
[China]
Trade Verify
Address: Add: No. 88, Mingri Road, Liyu Industrial Area, Tianyuan District, Zhuzhou City, Hunan Province.P.R.C. P.C:412007
Contact name:Linda Chen
Zhuzhou Mingri Cemented Carbide Co., Ltd. |
|
Verified Suppliers
|
|
|
Zhuzhou Manufacturer Grinding Tungsten Carbide Mill Roll Rings (TC rings)
| Grade | Density g/cm3 | Hardness HRA | T.R.S MPa | Performance&application recommend |
ML60 |
13.1 |
81.5 |
2950 |
It is suitable for stainless screw dies and semifinishing rollers
|
| ML50 | 13.3 | 82.0 | 2900 | It is suitable for nut forming dies and high impact-resistant dies |
| ML80 | 13.1 | 83.0 | 3200 | It is suitable for screw cap forming dies with high strength (highest impact-resistant forging dies) |
other grades and sizes can be offered as per customers' requirements | ||||
Product characters of carbide roller ring
Virgin raw material, fine processing, high precision, diamond
polishing, wear resistance and long service life.
Outer surface is as sintered, inner surface is crowned and diamond
polished to 10 micro and no lines and steps to be seen. Make sure
no scratches when wires passing through the guides.
Carbide wire guide is made of tungsten carbide for its extremely
hard and wear-resistant features, with sophisticated equipment for
precision grinding and polishing, coupled with advanced production
and processing technology, the inner and the outer diameter of the
hole and tolerance R at less than 0.01mm, the surface roughness
over the trough reached Ra 0.025 and above, it requires high
hardness, smooth surface in use to reduce injury and other enameled
wire
Remark:Customed Size Will be welcomed
Application of carbide roller ring
Tungsten carbide roller Ring are used for machenical seal, water pump, oil pump, flow restrictors, servo seat.
