Home Companies Zhuzhou TGC Cemented Carbide Co.,Ltd.

KIC 15 Tungsten Carbide Blanks Bars Wear Vibration Resistance

Contact Us

[China]

Trade Verify

Address: Block B, building 4, Area B, Hi Tech New Makin Valley Xiangyuehuan Road, Tianyuan District, Zhuzhou, Hunan, China

Contact name:Ms Pan

Zhuzhou TGC Cemented Carbide Co.,Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

KIC 15 Tungsten Carbide Blanks Bars Wear Vibration Resistance

Country/Region	china
City & Province	zhuzhou hunan
Categories	Aluminum Alloy

Product Details

PCD Tools shanks Tungsten carbide rods with KIC 15 good wear vibration resistance

ISO K30-K40

Cobalt: 12.5%

Outer diameter: 10.3mm +0.3

Inner diameter: 1.4 +/-0.15

TK: 4.8mm

Pitch: 54.41mm

Length: 330mm +3mm

Surface roughness: Raw sintered Ra 6.3 or as required

Application: for the production of PCD tools and tool shanks. The increased cobalt content and the coarser grain improve brazability while increasing fracture toughness

Grade datasheet:

ISO CODE	U.S.CODE	Binder	Density	Hardness		Transverse	KIC
ISO CODE	U.S.CODE	g/cm3	Density	HV30	HRA	Mpa	Mpa.m1/2
K30-K40	C-2	12.5	14.15	1300	89.5	3500	15

For more grades details, please kindly check the general datasheet in the following details:

Regular size for two helical coolant rods 30°:

Outer Diameter mm		TK mm		Inner Diameter mm		Deviation of holes position≤(mm) a	Pitch mm
OD	Tol.	TK	Tol.	ID	Tol.	Deviation of holes position≤(mm) a	P	Tol.
3.30	+0/+0.3	1.7	-0.3/0	0.400	±0.1	0.80	16.32	±0.23
4.30	+0/+0.4	2.2	-0.3/0	0.600	±0.15	0.80	21.77	±0.31
5.30		2.6	-0.4/0	0.700	±0.15	0.10	27.21	±0.38
6.30		2.6	-0.4/0	0.700	±0.15	0.13	32.65	±0.46
6.30		2.6	-0.4/0	1.000	±0.15	0.15	32.65	±0.46
7.30		3.7	-0.4/0	1.000	±0.15	0.15	38.09	±0.54
8.30		4.0	-0.4/0	1.000	±0.15	0.15	43.53	±0.62
8.30		3.5	-0.4/0	1.000	±0.15	0.15	42.53	±0.62
8.30		2.8	-0.4/0	1.000	±0.15	0.15	43.53	±0.62
9.30		4.8	-0.6/0	1.400	±0.15	0.20	48.97	±0.62
10.30	+0/+0.6	4.8	-0.6/0	1.400	±0.15	0.20	54.41	±0.77
10.30		2.6	-0.4/0	0.700	±0.15	0.20	54.41	±0.77
10.30		3.0	-0.4/0	1.000	±0.15	0.20	54.41	±0.77
10.30		5.0	-0.6/0	1.400	±0.15	0.20	54.41	±0.77
11.30		5.3	-0.8/0	1.400	±0.15	0.28	59.86	±0.85
12.30		6.3	-0.8/0	1.400	±0.15	0.30	65.3	±0.92
12.30		6.0	-0.8/0	1.750	±0.2	0.30	65.3	±1.00
13.3		6.5	-0.8/0	1.750	±0.2	0.34	70.74	±1.08
14.3		7.1	-0.8/0	1.750	±0.2	0.37	16.18	±1.08
14.3		3.5	-0.4/0	0.800	±0.15	0.37	76.18	±1.08
14.3		4.5	-0.6/0	1.400	±0.15	0.37	76.18	±1.08
15.3		7.7	-0.8/0	1.750	±0.2	0.4	81.62	±1.08
16.3		8.3	-0.8/0	1.750	±0.2	0.4	87.06	±1.23
16.3		8	-0.8/0	2.000	±0.2	0.4	87.06	±1.23
17.3		8.9	-0.8/0	1.750	±0.2	0.47	92.5	±1.31
18.3		9.55	-0.8/0	2.000	±0.2	0.5	97.95	±1.38
18.3		9.15	-0.8/0	1.750	±0.2	0.5	97.95	±1.38
19.3		10	-0.8/0	2.000	±0.2	0.5	103.39	±1.46
20.3		10.4	-1.0/0	2.000	±0.2	0.5	108.83	±1.54

General Tolerance for ground carbide rods

General tolerance for the h6 finished ground solid carbide rods
Diameter	Tolerance μm	Length	Tolerance	Straightness	Tolerance	Circularity	Tolerances
＜3.0	-6/0	＜100.0	+0.5/+1.0	＜4.0	0.07	<3,0	2,0 micron
3.0-6.0	-8/0	100.0-165.0	+1.0/+2.5	4.5-5.0	0.06	3,0- 6,0	2,5 micron
6.0-1.0	-9/0	165.0-335.0	+1.0/+6.0	5.5-12	0.05	6,1-10,0	3,0 micron
10.0-18.0	-11/0			＞12.5	0.04	10,1-18,0	3,5 micron
18.0-30.0	-13/0					18,1- 30,0	4,0 micron
30.0-50.0	-16/0					30,1- 50,0	5,0 micron

Our tungsten carbide rods:

100% virgin material, no recycled material
Spray drying tower and HIP sintering furnace
Constant excellent quality
Large stock for all sizes, the regular products can be shipped in 3 days, and the special rods can be ground in one week.
100% inspected before delivery. The inspection including raw material and dimension report will be sent you before delivery
Excellent grinding quality, Straightless and circularity could be 0.05 or 0.02.

Carbide grades

What we can provide

Hot Products

Titanium Alloy Carbide Unground Rods K30 / K40 OD 21.5mm Ultra Fine Grain Size

OD21.5mm Ultrafine grain size Unground carbide rod for Titanium alloy ISO Grade Grain Cobalt Density ...

Dia 4mm Round Unground Carbide Rods K30 - K40 0.6 Grain Size For Metal Working

0.6 Grain Size K30-K40 Unground Carbide Rods Dia 4mm For Metal Working Specification: Type: Unground ...

K10 Unground Tungsten Carbide Rods Cemented PCB Drill Blanks HRA 93.5

K10 Unground Cemented Carbide Rods PCB Drills Blank HRA 93.5 K05-K10 unground tungsten carbide rods. ...

Nano Grain Size Unground Carbide Rods Blank K20 - K30 Dia 8.3mm Wear Resistance

K20-K30 Nano Grain Size Unground Carbide Rods Dia 8.3mm For Titanium Alloy Working Specification: ...

T.R.S 4100 K40 Tungsten Round Bar Unground Dia 5mm Fine Grain Size

T.R.S 4100 K40 Unground Carbide Rods Dia 5mm For Alloy Steel Fine Grain Size Specification: Type: ...

Tungsten Unground Carbide Rods K20 14.4mm Diameter For Hardened Steel

K20 Unground carbide rods with Nano Grain size for hardened steel ISO Grain size Cobalt Density ...

Related Products