|
[China]
Trade Verify
Address: Block B, building 4, Area B, Hi Tech New Makin Valley Xiangyuehuan Road, Tianyuan District, Zhuzhou, Hunan, China
Contact name:Ms Pan
Zhuzhou TGC Cemented Carbide Co.,Ltd. |
|
Verified Suppliers
|
|
|
BSH-2 Tungsten carbide burrs blank Fram type for machining Bronze
Dimension:
Diameter: 5/16"
Length: 3/4"
Carbide burrs type: BSH-2 Fram type
T.R.S 1900
Hardness HV30 1600
Application: Bronze or other metals. Tungsten carbide burrs are widely used for the general machining, such as removing the burrs, rough grinding metals.
| BL ANK DESIGNATION | A | B | C | D | R1 | R2 | R3 | ||
| NOMINAL | ACTUAL | NOMINAL | ACTUAL | ||||||
| BSH2 | 5/16 | 0.327±0.005 | 3/4 | 0.750±0.010 | 0.257 | 0.489±0.015 | 1.068±0.010 | 0.068±0.005 | |
| BSH5 | 1/2 | 0.515±0.005 | 1-1/4 | 1.250±0.015 | 0.431 | 0.854±0.015 | 2.005±0.018 | 0.099±0.005 | |
| BSH6 | 5/8 | 0.640±0.005 | 1-7/16 | 1.438±0.015 | 0.495 | 0.880±0.015 | 2.255±0.020 | 0.099±0.005 | 0.755±0.008 |
Cobalt 6%
Hardness 90-91 HRA
Density 14.85-14.95 g/cm3
Grain size 1.2-3.0μm
Tungsten carbide burrs can be used with both electrically-powered
and pneumatically-powered hand-held tools to cut the most diverse
types of material, such as aluminum, brass, titanium alloys, cast
iron, copper, zinc alloys, bronze, nickel, various plastics, alloy
steels, etc. They can be used on a wide range of pneumatic,
electric and flexible drive tools.
Description of our carbide burrs
