DCMT11T3 Indexable Turning Tungsten Carbide Inserts Metal Working Cutting Tool Parts

DCMT11T3 Indexable Turning Tungsten Carbide Inserts Metal Working Cutting Tool Parts

What is tungsten carbide inserts?

Carbide is more expensive per unit than other typical tool materials, and it is more brittle, making it susceptible to chipping and breaking. To offset these problems, the carbide cutting tip itself is often in the form of a small insert for a larger tipped tool whose shank is made of another material, usually carbon tool steel.

Excellent chip control for stainless steel machining . Provides perfect turning surface of the workpiece:

Models introduction for Stainless Steel machining:

Different chipbreakers:

Grades recommendation:

Contrast Advantage/Benefits of choosing our carbide inserts:

1. Oxidation resistance.

Protection against thermal influences.

2. Abrasion resistance.

Protection against mechanical wear.

3. Higher production efficiency.
High cutting speeds and sharp edges and/ or geometries.

4. Less tool breakage, cost down of each component.

Saving costs and reducing the cost of each component to increase the profits .The high wear resistance makes the long tool life of the carbide inserts, which means you could saving more budget on purchasing the inserts.

Customer’s case: when a insert is failed on performance:

1. Flank Wear
-Workpiece material contains high hardness chemical elements (tool steel, die steel)
Increase cutting speed if abnormal flank wear is caused by a very slow cutting speed.
Solution: Reduce cutting speed or feed rate or use more wear resistant grade

2. Crater Wear

-Workpiece material contains high hardness chemical elements
Solution: Reduce cutting speed or feed rate or use more wear resistant grade

3. Cracking

-Excessive feed rates when interrupted cutting
Solution: Reduce feed rate, Use tougher grade

Quality control:

Technical support and after-sale service:

Our company can providing the following technical service for customers:

1: Special size inserts can be customized.

2: According to the workpiece design, material and CNC machine feed rate, cutting speed we can recommending a full set of practical scheme.

3: Suggsting more suitable model to replace the brands of Japan, Korea and so on.

4. We can offer together with tool holder.

Tool holder:

S08K-SDQCR/L07

S10K-SDQCR/L07

S12M-SDQCR/L07

S16Q-SDQCR/L07

S20Q-SDQCR/L11

S25R-SDQCR/L11

S32S-SDQCR/L11