Active Member
|
[China]
Address: Block. 7, Zone C, Auto Parts industrial Park, Tianyuan Dist., Zhuzhou, Hunan, China (Mainland)
Contact name:Shirley Pan
Zhuzhou Zhenfang Yaguang Tungsten Molybdenum Co., LTD. |
|
|
Customized Tic coating square shape tungsten carbide insert
Detail Information:
Grade: YG6/YG8/YT5/YW1...
Type: 14*14*5mm (can be customized)
Size: Customizable
Standard: GB(Chinese industrial standard )
Certification: ISO9001:2015
Product Name | Customized Tic coating square shape tungsten carbide insert with
screw |
Material | 100% virgin tungsten carbide material |
Grade | YG8/YG6/YT5/YT15/YW1/YW2/YG6X... |
Application | CNC lather tools |
Property | High quality and stability High performance. dimensionally
accurate,good wear resistance |
Grain size | 0.6-1.2um |
Powder compaction | Extrusion/Press |
Sintering | HIP sintering |
Grade and Application
Grade | ISO | Density (g/cm3) | Hardness (HRA) | T.R.S.(N/mm2) | Application |
YT5 | P30 | 12.9 | 90.5 | 2200 | Best strength, high impact and shock resistance among W-Co-Ti
alloys, but comparatively lower wear resistance. Suitable for rough
turning, rough planning, and semi-finish planning of carbon steel,
and alloy steel including forgings, stamped parts, and cast iron
surfaces during intermittent cutting. |
YW1 | M10 | 13 | 92.5 | 1710 | Better hardness, resistant to impact load. A good grade for general
purposes. Suitable for machining of ordinary steel, cast irons as
well as steels hard to be machined such as refractory steel, high
manganese steel, and stainless steel, etc |
YW2 | M20 | 12.9 | 91 | 1880 | Higher wear resistance and strength, resistant to high impact load.
Suitable for roughing and semi-finishing of ordinary steel, and
cast irons as well as refractory steel, high manganese steel, and
high-grade alloy steel, etc |
YG6X | K10 | 14.8 | 91.5 | 1890 | Fine grain WC alloy, wear resistance higher than YG6, strength
close to YG6. Suitable for machining chilled alloy cast irons, and
refractory alloy steel, as well as finishing of ordinary cast irons |
YG6 | K20 | 14.8 | 89.5 | 2050 | High wear resistance, better impact and shock resistance. Suitable
for semi-finishing, and finishing of cast irons, non-ferrous metal,
alloys, and non-metallic materials at moderate cutting speed |
YG8 | K30 | 14.6 | 89 | 2520 | High strength, better impact and shock resistance, but lower wear
resistance and cutting speed. Suitable for roughing of cast irons,
non-ferrous metal, alloys, and non-metallic materials at low speed. |
YT15 | P10 | 11.3 | 92 | 1650 | Higher wear resistance with a certain impact toughness, Suitable
for semi-finishing of medium chip sections, or finishing of small
chip sections of steel, cast steel, alloy steel. |
Our advantage
1. We are real factory in Zhuzhou: competitive price
2. we adopt advance production and testing equipment : good quality
3. We have professional technicians: providing professional
solution and suggestion
4.100% virgin material
5.100%inspection before shipment
6. Fast response and delivery
More Products
1. Tungsten Carbide rod
2. Tungsten Carbide Sealed Ring
3. Tugnsten Carbide Wear parts
4. Tugnsten Carbide Dies
5. Tungsten Carbide Non-standard parts
6. Tungsten Carbide Circular Blade
Packing and Shipment
Packing | Outside Carton or plywood case with inner plastic box. |
Shipping | UPS,TNT,EMS,Fedex,DHL,or by sea,as you request. |
