Active Member
|
[China]
Address: Block. 7, Zone C, Auto Parts industrial Park, Tianyuan Dist., Zhuzhou, Hunan, China (Mainland)
Contact name:Shirley Pan
Zhuzhou Zhenfang Yaguang Tungsten Molybdenum Co., LTD. |
|
|
0.6mm Inner Hole Blank Tungsten Carbide Round Rod With 10% Coblat
Our tungsten carbide rod blanks are available in a wide selection of micro-grain and sub-micron grades that are engineered to stand up to thermal extremes, vibration, and impact wear resistance.
Our products are sinter-HIP processed for ISO 9001:2015 certified manufacturing facilities.
| Grade | YL10.2 (K25-K35) | |
| Co | % | 10 |
| WC | % | 90 |
| Density | g/cm3 | 14.5 |
| HV30 | kg/mm2 | 1600 |
| Hardness | HRA | 92.5-92.8 |
| Bending Strength | N/mm2 | >3800 |
| Porosity | A B C | A02B00C00 |
| WC Grain Size | μm | 0.6 |
Application:
Application of tools:
Twist drill,End mill,Tap
Applications of material:
◆ Cast iron
◆ Stainless steel,Heat-resistant steel,Hardened steel(hardness<60HRC)
◆ Nickel-based, Titanium alloys
We offer:
Solid Rods and Rods with Coolant Hole
We manufactures 12” (330mm) length rods with single hole, straight
two-hole in diameters from 0.3mm to 33mm.
High-performance gun drill rod blanks are available.
Cut-to-Length Rod
We have one of the largest and most complete lines of ground CTL
selections. Premium grades, standard and micro-finished surface
finish, and h6 ISO diameter tolerances in inch and metric lengths
and diameters. Special preform features are available, including
male center, female center, ballnose, step reduction, and shaped
points.
Production Process of Tungsten Carbide Rod:
Power mixing-Pressing-HIP sintering-Blank- Processing- Finished
Various grade for your choice
| Grade | YL10.2 | YG6 | YG6X | YG10X | YG8 | YG15 |
| ISO Range | K25-K35 | K20 | K10 | K35 | K30 | K40-K50 |
| WC+others % | 90 | 94 | 94 | 90 | 92 | 85 |
| Co % | 10 | 6 | 6 | 10 | 8 | 15 |
| Grain Size μm | 0.6 | 0.8 | 0.6 | 0.6 | 0.8 | 0.8 |
| Density g/cm3 | 14.5 | 14.9 | 14.9 | 14.5 | 14.6 | 14.1 |
| Hardness HRA | 92.5-92.8 | 89.5 | 92 | 90 | 89 | 86.5 |
| T.R.S N/mm2 | 3800-4000 | 2150 | 2000 | 2200 | 2200 | 2400 |
| Grade | Application |
| YL10.2 | ultra-fine grain WC+ 10% Coblat, with good Wear resistance and Toughness, strength comparatively higher,suitable for PCB micro drills,for making drills,end mill,reamer,taps,burrs etc. |
| YG6 | Fine Grain WC+6% Cobalt, with Good Wear resistance, used for hard wood,processing original wood,aluminum section bar,brass rod and cast iron. |
| YG6X | ultra-fine grain size with cobalt 6%,with good wear resistance,Suitable for processing Chilled cast iron, heat-resistant alloy steel, and fine process of common cast iron |
| YG10X | ultra-fine grain WC+ 10% Cobalt, suitable for small diameter Micro drill ,vertical milling cutter, rotating file |
| YG8 | fine GrainWC+ 8% Cobalt Suitable for the roughening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
| YG15 | fine grain WC +15% Cobalt for mining tools, cold heading and punching dies |
Production Advantages
1. we using 100% WC and the raw matearils of CO.
2. High hardness HRA89-93 ,good bending strength TRS 2800-4200.N/mm2
3. Long probation,stamping.
4. Has good wear resitance.
5. Professional manufacturer for more than 10years experience.
6. With the HIP sintered technology,the structure of tungsten carbide is more uniform,more dense,the TRS can be raised more than 20%
7. We make tungsten carbide rods extruded or pressed.
8. Customization is acceped
Tungsten carbide rod grades are mostly fine and ultra fine grain with high performance. It's suitable for processing of non-ferrous metal, plastic materials, carbon fiber, chilled cast iron and heat-resistant alloy steel, high-temperature alloy steel, stainless steel, high manganese steel, etc. It can manufacture of drill bits, end mills, and reamers. Tungsten carbide bushing widely used in stamping tools and wear-resistant tools, etc.
Part of our carbide rod Size List
| D | DTol | d | dTol | L | Tol |
| mm | mm | mm | mm | mm | mm |
| 2.5 | +0.20～0.50 | 0.3 | ±0.05 | 330 | 0～+5.0 |
| 4.0 | +0.20～0.50 | 1.0 | ±0.05 | 330 | 0～+5.0 |
| 6.0 | +0.20～0.50 | 1.0 | ±0.05 | 330 | 0～+5.0 |
| 8.0 | +0.20～0.50 | 1.5 | ±0.05 | 330 | 0～+5.0 |
| 10.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 12.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 14.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 16.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 18.0 | +0.40～0.80 | 3.0 | ±0.05 | 330 | 0～+5.0 |
| 20.0 | +0.40～0.80 | 3.0 | ±0.05 | 330 | 0～+5.0 |
| 22.0 | +0.40～0.80 | 3.0 | ±0.05 | 330 | 0～+5.0 |
| 24.0 | +0.40～0.80 | 4.0 | ±0.05 | 330 | 0～+5.0 |
| 26.0 | +0.40～0.80 | 5.0 | ±0.05 | 330 | 0～+5.0 |
We manufactured and stocked unground and ground carbide rods for you.
We guarantee:
* We are real factory in Zhuzhou
* Full ability to accept OEM & ODM orders
* Manufactured with100% tungsten carbide raw material
* Comply with ISO 9001:2015 Certification
* Strict inspection for quality of raw material and finished products
* Rich experience of over 10 years
* Advanced technology , automatic pressing , HIP sintering
Our packing and shipping
Based on Detail products, we use different Standard packing suitable overseas shipment.
For carbide rod packing as following
1. outsizde carton or plywood case
2. inner packing is plastic box or small carton with cotton or paper protection
3. Shipping:UPS,TNT,EMS,Fedex,DHL, shipment by sea, or as you request.
