Active Member
|
[China]
Address: Block. 7, Zone C, Auto Parts industrial Park, Tianyuan Dist., Zhuzhou, Hunan, China (Mainland)
Contact name:Shirley Pan
Zhuzhou Zhenfang Yaguang Tungsten Molybdenum Co., LTD. |
|
|
3mm Grounded Tungsten Carbide Rod ,Tungsten Cobalt Alloy Ground Rod
We manufactured and stocked a large range of dimensions unground and ground carbide rods for you, which guarantee our fast delivery.
Carbide rods are one of our best-selling products. We can produce carbide rods diameter from 0.3mm to 35mm with length 310mm, 330mm or 340mm, or others. Grade in YL10.2,YG10X, YG6, YG8 etc.
And h5 or h6 tolerance, or other requirement.
We make tungsten carbide rods extruded or pressed.
Our standard size models:
| Grinding | Blank | ||||
| D | L | D | L | ||
| (mm) | Tol.(mm) | Tol.(+1mm) | (mm) | Tol.(mm) | Tol.(+3mm) |
| 2 | h6 | 330 | 2.2 | +0.2 | 330 |
| 3 | h6 | 330 | 2.7 | +0.2 | 330 |
| 3.175 | h6 | 330 | 3.2 | +0.2 | 330 |
| 4 | h6 | 330 | 3.7 | +0.2 | 330 |
| 5 | h6 | 330 | 4.2 | +0.2 | 330 |
| 6.35 | h6 | 330 | 4.7 | +0.2 | 330 |
| 7 | h6 | 330 | 5.2 | +0.2 | 330 |
| 8 | h6 | 330 | 5.7 | +0.2 | 330 |
| 9 | h6 | 330 | 6.2 | +0.2 | 330 |
| 10 | h6 | 330 | 6.7 | +0.2 | 330 |
| 11 | h6 | 330 | 7.2 | +0.2 | 330 |
| 12.7 | h6 | 330 | 8.2 | +0.3 | 330 |
| 13 | h6 | 330 | 8.7 | +0.3 | 330 |
| 14 | h6 | 330 | 9.2 | +0.3 | 330 |
| 15 | h6 | 330 | 9.7 | +0.3 | 330 |
| 16 | h6 | 330 | 10.2 | +0.3 | 330 |
| 17 | h6 | 330 | 10.7 | +0.3 | 330 |
| 18 | h6 | 330 | 11.2 | +0.3 | 330 |
| 19 | h6 | 330 | 11.7 | +0.3 | 330 |
| 20 | h6 | 330 | 12.2 | +0.3 | 330 |
| 22 | h6 | 330 | 14.2 | +0.3 | 330 |
| 25 | h6 | 330 | 16.2 | +0.3 | 330 |
For more size information, please kindly email or call us
Specification
| Material: | tungsten carbide WC+Co |
| Dimension: | Dia10*75/100/150mm Dia2.0*330mm various size for choose |
| Ground Tolerance: | h6 based on requirement |
| Blank tolerancce: | +0.3~1.5mm |
| Grade: | K20 K30 K10, YL10.2, YG20 YG10X |
| Production Process: | Power mixing-Pressing-HIP sintering-Blank- Processing- Finished |
| Type: | polished round rod |
| Surface: | blank or grinding |
| Performance | High hardness, wear /corrosion resistancce, good toughness, good straightness |
| Non-standard or tolerance | can be customized |
Carbide Rod Grade Information
Carbide Rods Grades for Cutting Tools
| Grade | ISO Grade | WC% | Co% | Grain Size μm | Hardness (HRA) | Density g/cm3 | T.R.S. N/mm2 | Application |
| YG6X | K10 | 94 | 6 | 0.6-0.8 | 14.9 | 92 | 2000 | Suitable for processing Chilled cast iron, heat-resistant alloy steel, and fine process of common cast iron |
| YL10.2 | K25-K35 | 90 | 10 | 0.4-0.6 | 14.5 | 92.8-93 | 4800 | Wear resistance and strength comparatively higher,suitable for PCB micro drills,for making drills,end mill,reamer,taps,burrs etc. |
| Grade | ISO Grade | Density g/cm3 | Hardness HRA | T.R.S N/mm2 | Application |
| YT5 | P30 | 11.50-13.20 | 90.0 | 1750 | Suitable for heavy duty cutting of steel and cast steel and for a low-speed and medium-speed and a big feed-rate roughing operation under unfavorable machining conditions |
| YT14 | P20 | 11.20-11.80 | 91.0 | 1550 | Suitable for semi-finishing and finishing machining of steel and cast steel, using a medium feed-rate |
| YT15 | P10 | 11.10-11.60 | 91.5 | 1500 | Suitable for semi-finishing and finishing machining of steel and cast steel and a medium feed-rate and a rather high cutting speed is to be recommended |
| YC40 | P40 | 13.00-13.40 | 89.5 | 1860 | Suitable for heavy duty cutting of steel and cast steel with a possible big feed-rate and for face milling as well. |
| YW1 | M10 | 12.85-13.40 | 92.0 | 1380 | Suitable for semi-finishing and finishing of stainless and ordinary alloyed steel |
| YW2 | M20 | 12.65-13.35 | 91.0 | 1680 | Suitable for semi-finishing and finishing of stainless and low alloyed steel, mainly used for machining of trains' wheel hubs |
| YW3 | M10 | 12.85-13.10 | 92.0 | 1420 | It is suitable for semi-finishing and finishing of stainless and ordinary alloyed steel |
Application of tungsten carbide rod
Our tungsten carbide rod manufactured with high hardness and toughness, vibration-resistance, especially no stick when working.
It is widely used for making
- various kinds of carbide solid tools and cutting tools, such as drills, end mills, thread taps, rotating file,etc.
- Tungsten Carbide wear Parts
- A good material for general-purpose. Suitable for machining carbon steel, cast irons, stainless steel, heat-resistance steel, nickel based alloys and titanium alloys.
- Tungsten Carbide Moulding dies
Our tungsten Carbide Rod Type
- blank tungsten carbide rod,
- ground carbide rod,
- carbide rod with hole,
- fixed carbide rod,
- chamfered carbide rod
For more detail size,pls email us,thanks
