Active Member
|
[China]
Address: Block. 7, Zone C, Auto Parts industrial Park, Tianyuan Dist., Zhuzhou, Hunan, China (Mainland)
Contact name:Shirley Pan
Zhuzhou Zhenfang Yaguang Tungsten Molybdenum Co., LTD. |
|
|
Polishing Surface Tungsten Carbide Composite Rods , Tungsten Carbide Round Bar
Tungsten carbide rod is widely used for High quality tungsten carbide tools such as milling cutter, endmill, drills, reamers, etc. We announce that we have achieved best cost-effectiveness tungsten carbide rod for cutting blanks.Becasue We used unique method of pressing technology and sintering technology.
We manufactured carbide rod Diameter from 0.3mm to 40mm,
length in 310mm, 330mm or 340mm, or any length.
Grade inYL10.2, K10, K20 K30, K35 or etc.
Various types
Solid rods
Single Central hole rods
Double parallel hole rods
Double helical 30° 40° hole rods
Chmafered rods
One side chamfered with weldon shank rods
Special customized rods
Application of tungsten carbide rod
Our tungsten carbide rod manufactured with high hardness and toughness, vibration-resistance, especially no stick when working.
It is widely used for making
- various kinds of carbide solid tools and cutting tools, such as drills, end mills, thread taps, rotating file,etc.
- A good material for general-purpose. Suitable for machining carbon steel, cast irons, stainless steel, heat-resistance steel, nickel based alloys and titanium alloys.
- Tungsten Carbide wear Parts
- Tungsten Carbide Mouldingdies
Production Info.
1. Hardness can reach to HRA 94 max, TRS ≥4000 N/mm²
2. Various dimension of the rods can be supplied, also can customized as your requirements.
3. Blank rods and polished rods available
4. The minimum diameter is φd 0.3mm and the tolerance can reach to ±0.001mm.
5. Common diameter from 1mm---35mm
6. Blank Diameter tolerance: +0.3--0.8mm; length tolerance: +0.3--1.8mm
7. Ground tolerance generally h5/h6, can based on your requirement.
Product features:
1. Using100% virgin raw material guaranteed products quality
2. Our tugnsten carbide rods use dry isostatic pressing machine and low press sintering technology, which showed uniform distribution of cobalt magnetic, high hardness and bending strength.
3. Inner structure are more compact and well distributed in metallographic test.
4. It can reach a mirror effect surface after accurate grinding.
5. Perfect quality control systerm: ISO9001:2015
6. customization is avaliable
Grade information
| Carbide Grade | ZF06C | ZF08C | ZF12C | ZF10CS | ZF10CF | ZF10C | |
| WC | % | 94 | 92 | 88 | 90 | 90 | 90 |
| Co | % | 6 | 8 | 12 | 10 | 10 | 10 |
| Grain Size | μm | 0.4 | 0.4 | 0.4 | 0.4 | 0.6 | 0.8 |
| Density | g / c m³ | 14.85 | 14.65 | 14.25 | 14.4 | 14.4 | 14.4 |
| Hardness | HRA | 94 | 93.5 | 92.3 | 93 | 92.5 | 91.5 |
| TRS | N / m m² | 4000 | 4000 | 3800 | 3800 | 3600 | 3600 |
| Grade | Recommendation |
| ZF06C | This tungsten carbide rod is with 0.4μm ultrafine particles and CO 6%. Be suitable for processing aluminum- magnesium alloy, glass fiber, carbon fiber, wood, hard plastic, etc. Recommend for making micro tools and drills. |
| ZF08C | This tungsten carbide rod is with 0.4μm ultrafine particles and CO 8%. Be suitable for processing resin, wood, titanium alloy, stainless steel, copper-aluminum alloy, composite material. Recommend making high speed drill, end mill, graver and micro-drill PCB with diameter less than 0.8mm. |
| ZF12C | This tungsten carbide rod is with 0.4μm ultrafine particles and CO 12%. Be suitable for semi-finishing and finishing process of stainless steel, mold steel and normal titanium alloy, etc. Recommend for making all types of high speed end mills, reamers and gravers. |
| ZF10CS | This tungsten carbide rod is with 0 . 4 μ m ultrafine particles and CO 12 %, higher hardness . Be suitable for finishing process of stainless steel , mold steel and normal titanium alloy , etc . Recommend for making all types of high speed end |
| ZF10CF | This tungsten carbide rod is with 0 . 6 μ m Sub - micron particles and CO 10 %, which is widely used in cutting tools . Be suitable for rough finishing , semi - finishing and finishing of mold steel , grey cast iron , austenitic stainless steel and heat - resistant alloy . Recommend for making normal drill and end mill |
| ZF10C | This tungsten carbide rod is with 0 . 8 μ m Sub - micron particles and CO 10 %. Be suitable for rough finishing and semi - finishing of normal steel , cast iron and stainless steel . Recommend for making normal drill and end mill |
Our standard size models:
| Grinding | Blank | ||||
| D | L | D | L | ||
| (mm) | Tol.(mm) | Tol.(+1mm) | (mm) | Tol.(mm) | Tol.(+3mm) |
| 2 | h6 | 330 | 2.2 | +0.2 | 330 |
| 3 | h6 | 330 | 2.7 | +0.2 | 330 |
| 3.175 | h6 | 330 | 3.2 | +0.2 | 330 |
| 4 | h6 | 330 | 3.7 | +0.2 | 330 |
| 5 | h6 | 330 | 4.2 | +0.2 | 330 |
| 6.35 | h6 | 330 | 4.7 | +0.2 | 330 |
| 7 | h6 | 330 | 5.2 | +0.2 | 330 |
| 8 | h6 | 330 | 5.7 | +0.2 | 330 |
| 9 | h6 | 330 | 6.2 | +0.2 | 330 |
| 10 | h6 | 330 | 6.7 | +0.2 | 330 |
| 11 | h6 | 330 | 7.2 | +0.2 | 330 |
| 12.7 | h6 | 330 | 8.2 | +0.3 | 330 |
| 13 | h6 | 330 | 8.7 | +0.3 | 330 |
| 14 | h6 | 330 | 9.2 | +0.3 | 330 |
| 15 | h6 | 330 | 9.7 | +0.3 | 330 |
| 16 | h6 | 330 | 10.2 | +0.3 | 330 |
| 17 | h6 | 330 | 10.7 | +0.3 | 330 |
| 18 | h6 | 330 | 11.2 | +0.3 | 330 |
| 19 | h6 | 330 | 11.7 | +0.3 | 330 |
| 20 | h6 | 330 | 12.2 | +0.3 | 330 |
| 22 | h6 | 330 | 14.2 | +0.3 | 330 |
We can customize dimension for you.For more size information, please kindly email or call us
Production Process:
Power mixing-Pressing-HIP sintering-Blank- Processing- Finished
Our packing
Based on Detail products, we use different Standard packing suitable overseas shipment.
For carbide rod packing as following
1. outsizde carton or plywood case
2. inner packing is plastic box or small carton with cotton or paper protection
2. High density,Good machinability ,High modulus of elasticity
,Strong corrosion resistance,Good mechanical properties
3. It can effectively absorb X rays and gamma rays (the absorption
of X rays andγ rays is higher than lead 30~40%)
4. 100% QC inspection Before Shipment.
5. We guarantee that all of our products are used with 100% Virgin Raw Material.
6. Customization is avaliable
| Packing | Outside Carton or plywood case with inner plastic box. |
| Shipping | UPS,TNT,EMS,Fedex,DHL,or by sea,as you reques |
1 We are a Real Factory in Zhuzhou City.
2. High density,Good machinability ,High modulus of elasticity
,Strong corrosion resistance,Non-poisonous ,Good mechanical
properties
3.100% QC inspection Before Shipment.
4. We guarantee that all of our products are used with 100% Virgin
Raw Material.
5. We can produce the Special Non-standard Shaped Carbide Products
as per your sample or drawing.
Zhuzhou Zhenfang Yaguang Tungsten-Molybdenum Co.,LTD is a professional manufacture in tungsten carbide field. We
have engaged in this field for over ten years. We have rich
experience on tungsten carbide studying and manufacture.We pursuit
providing efficient solution and high quality products for clients.
We specialize in tungsten carbide rod, carbide plate&strips,
carbide dies, carbide roller, carbide wear parts for petrochemical
industry, carbide cutting tools.Tungsten carbide rod and customized
wear parts is our advantage.
We always keep good relationship with our clients, enhancing
communicatio
Our factory
Certification
Contact information
