Zigong Xingyu Cemented Carbide Dies & Tools Co., Ltd. |
|
Diameter 20mm Carbide Ring Customized Tungsten Carbide Seal Ring For Flygt Pump Application
Applications
The cemented carbide seal-ring can be divided into both of the
kinetic seal-ring and static seal-ring, and constitutes mechanic
seal together with the spring, rubber seal-ring and steel jecket.
It will be used mainly for waste water pump, water discharge pump
for the mines, centrifugal pump, centrifuge, slag slurry pump and
slurry pump in the adverse working conditions of high speed
rotation, sand flush abrasion and corrosion. The seal-ring will be
installed on the pump body and rotating axle, and forms through the
end face of the kinetc and static ring a liquid or gas seal.
Features
The carbon-graphite material for mechanical use is with excellent
self-lubrication; good resistance to chemical corrosion; relatively
high thermal conductivity and thermostability; sufficient
mechanical strength; and it is easy to be processed into all kinds
of geometrical shapes. It is widely used in various mechanical
equipment, such as: the equipped sealing elements of centrifugal
pump, immersible pump, chemical reaction kettle, water turbine, and
steam roster, etc; the piston ring, guide ring and lining equipped
on the compressor, oxygenerator and ammonia pump; shield electric
machine, submersible motor and the bearing of other mechanical
equipment and instruments, etc.
The precision seal-ring is made of high quality materials by an advanced process with serveral patented technologies, have very complicated shapes, high accuracy, stable mechanic properties, much higher wear and corrosion resistance, and a service life of more than twenty thousand hours in the normal case.
Grade List
Grade | Application Mediums |
XC100 | oli,sewage,weak acid and alkaline,light hydrocarbon,solid granules |
XC101 | |
XC200 | |
XC201 | |
XC401 | dry gas seals |
XN100 | oil,sewage,weak acid and alkaline,light hydrocarbon,solid granules,sea water |
XN101 | |
XN300 | |
XN301 | |
XCN30 | |
XCN31 | |
XTP10 | oil,sewage,weak acid and alkaline,light hydrocarbon,solid granules |
XTN10 | oil,sewage,weak acid and alkaline,light hydrocar |
Grade | Co (wt%) | Density (g/cm³) | Hardness(HRA) | TRS (≥N/mm²) |
XC100 | 5.8-6.2 | 14.6-15.0 | 91.5-92.5 | 2000 |
XC101 | 5.8-6.2 | 14.6-15.0 | 91.5-92.5 | 2500 |
XC200 | 7.8-8.2 | 14.5-14.9 | 91.0-92.0 | 2100 |
XC201 | 7.8-8.2 | 13.5-14.9 | 91.0-92.0 | 2800 |
XC300 | 9.8-10.3 | 14.2-14.6 | 90.5-91.5 | 2600 |
XC301 | 9.8-10.3 | 14.2-14.6 | 90.5-91.5 | 3200 |
XC401 | 12.7-13.2 | 14.0-14.3 | 87.5-88.5 | 3000 |
Grade | Ni (wt%) | Density (g/cm³) | Hardness(HRA) | TRS (≥N/mm²) |
XN100 | 6.5-7.5 | 14.5-14.8 | 88.5-91.0 | 1800 |
XN101 | 6.5-7.5 | 14.5-14.8 | 88.5-91.0 | 2200 |
XN300 | 10.0-11.0 | 14.2-14.6 | 86.5-89.5 | 2100 |
XN301 | 10.0-11.0 | 14.2-14.6 | 86.5-89.5 | 2400 |
XTN10 | 19.5-20.5 | 6.5-7.5 | 90.5-92.0 | 1600 |
Grade | Co+Ni (wt%) | Density (g/cm³) | Hardness(HRA) | TRS (≥N/mm²) |
XCN 30 | 9.5-10.5 | 14.0-14.5 | 88.0-90.0 | 2400 |
XCN31 | 9.5-10.5 | 14.0-14.5 | 88.0-90.0 | 3200 |
XTP10 | 7.0-9.0 | 11.5-13.0 | 89.5-91.0 | 1800 |
Spec | Dimension & Tolerance | ||||||||||||
A1 | A2 | A3 | |||||||||||
d (H13) | D (u6) | H | d (H13) | d1 | D (u6) | H | h | d (H13) | d1 | D (u6) | H | h | |
18 | 19(20) | 28(26) | 5 | 19(20) | 25(26) | 28 | 5 | 1.5 | 19 | 22 | 28 | 5 | 1.5 |
20 | 21(22) | 30(28) | 21(22) | 27(28) | 30 | 21 | 24 | 30 | |||||
22 | 23(24) | 32(30) | 23(24) | 29(30) | 32 | 23 | 26 | 32 | |||||
24 | 25(26) | 35(32) | 25(26) | 31(32) | 35 | 25 | 29 | 35 | |||||
25 | 26(28) | 36(34) | 26(28) | 32(34) | 36 | 26 | 30 | 36 | |||||
28 | 29(31) | 39(37) | 6 | 29(31) | 35(37) | 39 | 6 | 29 | 33 | 39 | 6 | ||
30 | 31(33) | 41(39) | 31(33) | 37(39) | 41 | 31 | 35 | 41 | |||||
32 | 33(36) | 43(42) | 33(36) | 39(42) | 43 | 33 | 37 | 43 | |||||
33 | 34(36) | 44(42) | 34(36) | 40(42) | 44 | 34 | 38 | 44 | |||||
35 | 36(38) | 46(44) | 36(38) | 42(44) | 46 | 36 | 40 | 46 | |||||
38 | 39(41) | 50(47) | 39(41) | 45(47) | 50 | 39 | 44 | 50 | |||||
40 | 41(43) | 52(49) | 41(43) | 47(49) | 52 | 41 | 46 | 52 | |||||
43 | 44(46) | 55(52) | 44(46) | 50(52) | 55 | 44 | 49 | 55 | |||||
45 | 46(48) | 57(54) | 46(48) | 52(54) | 57 | 46 | 51 | 57 | |||||
48 | 49(51) | 60(57) | 49(51) | 55(57) | 60 | 49 | 54 | 60 | |||||
50 | 51(53) | 62(59) | 51(53) | 57(59) | 62 | 51 | 56 | 62 | |||||
53 | 54(56) | 65(62) | 54(56) | 60(62) | 65 | 54 | 59 | 65 | |||||
55 | 56(58) | 67(64) | 56(58) | 62(64) | 67 | 56 | 61 | 67 |
Spec | Dimension & Tolerance | |||||||
D -0.2 | D (H13) | d1 (h8) | L | L1 | h1 | h | Rubber ring cross-sectionnal diameter | |
18 | 32.7 | 19 | 26.7 | 20 | 8.5 | 6.5 | 4 | 3.55 |
20 | 34.7 | 21 | 28.7 | |||||
22 | 36.7 | 23 | 30.7 | |||||
24 | 38.7 | 25 | 32.7 | |||||
25 | 39.7 | 26 | 33.7 | |||||
28 | 42.7 | 29 | 36.7 | |||||
30 | 44.7 | 31 | 38.7 | |||||
32 | 47.7 | 33 | 41.7 | |||||
33 | 47.7 | 34 | 41.7 | |||||
35 | 49.7 | 36 | 43.7 | |||||
38 | 55.7 | 39 | 48.7 | 21 | 8.9 | 5 | 4.1 | |
40 | 57.7 | 41 | 50.7 | |||||
43 | 60.7 | 44 | 53.7 | |||||
45 | 62.7 | 46 | 55.7 | |||||
48 | 65.7 | 49 | 58.7 | |||||
50 | 69.7 | 51 | 61.7 | 21.5 | 8.8 | 4.7 | ||
53 | 72.7 | 54 | 64.7 | |||||
55 | 74.7 | 56 | 66.7 | |||||
58 | 77.7 | 59 | 69.7 | |||||
60 | 79.7 | 61 | 71.7 | |||||
63 | 82.7 | 64 | 74.7 | |||||
65 | 84.7 | 66 | 76.7 | |||||
68 | 89.7 | 69 | 80.6 | |||||
70 | 91.7 | 71 | 82.6 | 22.5 | 9.2 | 5.3 |
Spec | Dimension & Tolerance | |||||
D -0.2 | d (H13) | d1 (h8) | L | L1 | Rubber ring cross-sectionnal diameter | |
14 | 24.7 | 15 | 20.8 | 12.8 | 9.6 | 2.4 |
16 | 26.7 | 17 | 22.8 | |||
18 | 32.7 | 19 | 26.8 | 14.5 | 10 | 3.55 |
20 | 34.7 | 21 | 28.8 | |||
22 | 36.7 | 23 | 30.8 | |||
24 | 38.7 | 25 | 32.8 | |||
25 | 39.7 | 26 | 33.8 | |||
28 | 42.7 | 29 | 36.8 | |||
30 | 44.7 | 31 | 38.8 | |||
32 | 47.7 | 33 | 41.8 | |||
33 | 47.7 | 34 | 41.8 | |||
35 | 49.7 | 36 | 43.8 | |||
38 | 55.7 | 39 | 48.8 | 15 | 9.9 | 4.1 |
40 | 57.7 | 41 | 50.8 | |||
43 | 60.7 | 44 | 53.8 | |||
45 | 62.7 | 46 | 55.8 | |||
48 | 65.7 | 49 | 58.8 | |||
50 | 69.7 | 51 | 61.8 | 15.5 | 9.8 | 4.7 |
53 | 72.7 | 54 | 64.8 | |||
55 | 74.7 | 56 | 66.8 | |||
58 | 77.7 | 59 | 69.8 | |||
60 | 79.7 | 61 | 71.8 | |||
63 | 82.7 | 64 | 74.8 | |||
65 | 84.7 | 66 | 76.8 | |||
68 | 89.7 | 69 | 80.8 | 16 | 9.7 | 5.3 |
Spec | Dimension & Tolerance | ||||||||
D -0.1 | D (H13) | d1 (h8) | L | h | h1 | h2 | h3 | Rubber ring cross-sectionnal diameter | |
14 | 24.8 | 15 | 20.3 | 10 | 2.5 | 3 | 2 | 4.5 | 2.65 |
16 | 26.8 | 17 | 22.3 | ||||||
18 | 32.8 | 19 | 27.7 | 11 | 4.2 | 2.5 | 3.55 | ||
20 | 34.8 | 21 | 28.7 | ||||||
22 | 36.8 | 23 | 30.7 | ||||||
24 | 38.8 | 25 | 32.7 | 12 | 3.5 | ||||
25 | 39.8 | 26 | 33.7 | ||||||
28 | 42.8 | 29 | 37.7 | ||||||
30 | 44.8 | 31 | 38.7 | ||||||
32 | 47.8 | 33 | 41.7 | ||||||
33 | 47.8 | 34 | 41.7 | ||||||
35 | 49.8 | 36 | 43.7 | ||||||
38 | 55.8 | 39 | 49.7 | ||||||
40 | 57.8 | 41 | 51.7 | 13 | 4 | ||||
43 | 60.8 | 44 | 54.7 |
Production Process
FAQ
A1: What is your main product?
Q1: The main product include tungsten carbide bar, carbide wire drawing die, carbide drill bit button, carbide SS10 tips, carbide strip and carbide plate, anvil, carbide inserts, and any other carbide products and customized products.
A2: Do you have certification on your products?
Q2: ISO 9001:2018
A3: What is about your general delivery date?
Q3: Normally 7-15 workdays .
A4: What is your packing?
Q4: We use standard export packing and customization is available.
A5: Can I get the samples?
Q5: Sure, contact us directly.