Active Member
|
[China]
Address: No. 6 B2 Road, Zigong City, Sichuan Province
Contact name:Philippe
Zigong Xingyu Cemented Carbide Dies & Tools Co., Ltd. |
|
|
Diamond And Tungsten Carbide Substrate Brazed Tips Square Cutting Tools Blank
Advantages
1. Made from 100% virgin raw material.
2. produced with advanced equipments and perfect workmanship.
3. All products go through in-process and final inspection..
4. Stable and best production ability.
5. Best quality along with reasonable price.
Main products
Turning insert, milling insert, threading insert, grooving insert,
aluminum insert, carbide endmill,etc. Such as: CNMM, CNMG, CCMW,
CCMT, DNMA, DNMG, DCMW, DCMT, VNMG, VBMT, WNMG, WXMT, WCMT, SPUN,
SNMA, SNMM, SCMT, LNMG, RNMA, RNMM, RNMG, RPMW, RPMT, KNUX, APKT,
TNMA, TNMM, TNMG, TCMT, TPMT, etc.
Grade List
| ISO | Grade | Typical Property Values | ||||
| Density (g/cm³) | Bending Strength (N/mm³) | Hardness HRA | Performance & Applications | Equivalent to ISO | ||
| K | YG813 | 14.4 | 2200 | 92 | Good wear resistance,higher bending strength and higher adhesion.Resistance to bonding maching of refractory alloys,stainless steel and high manganese steel,etc. | K10-K20 /M20 |
| YG610 | 14.7 | 2000 | 93.5 | Good thermal strength and high wear resistnace.Continuous or intermittent cutting of cast irons,refractory alloys and hardened-steel. | K01-K10 | |
| YT726 | 14.2 | 1800 | 93 | High red hardness and wear-resistance.Turning and milling of chilled cat irons,alloy cast irons and hardend-steel. | K05-K10 /M20 | |
| YG6X | 14.9 | 2100 | 92.5 | High wear resistance and higher,strength.Maching of chilled alloy cast irons and refractory alloy steel or finishing of common cast irons. | K10 | |
| YG6A | 14.9 | 1850 | 93 | Good wear resistance .Semi-finishin of chilled cst iron,nonferrous metals & their alloys;semi-finishing and finishing of hardened steel,alloy steel. | K10 | |
| ZK20 (YG6) | 15 | 2100 | 91.1 | High wear-resistane and better,impact and shock resistance higher than YG3X.Semi | K15-20 | |
| ZK30 (YG8) | 14.7 | 2100 | 90 | High strength and good,impact and shock resistance,but wear resistance and cutting speed comparatively lower.Roughing of cast irons,non-ferrous metals & their alooys as well as non metallic materials at low cutting speed. | K30 | |
| ZK10UF | 14.8 | 2500 | 93 | Semi-finishing and finishing of cast irons and nonferrous metals. | K05-K15 | |
| ZK20UF | 14.6 | 2700 | 92.7 | Semi-finishing and roughing of cast iron and non-ferrous metals. | K05-K15 | |
| ZK30UF | 14.4 | 2800 | 91.7 | Superior toughness and high hardness .Finishing and rigid milling of cast irons and non-ferrous metals,ideal for hole-machining tools. | K20-K40 | |
| YG522 | 14.3 | 2000 | 92.5 | Good wear resistance and high strength.Specially suitbale for maching of bamboo and wood.Also suitable for machining of non-ferrous metal and nonmetallic material,with long life time. | K15-K30 | |
| YG546 | 14.6 | 2700 | 90.5 | Good toughness,high strength,capable of resisting high impact load .Roughing of stainless steel and cast irons. | K30-K40 | |
| YG3X | 15.2 | 1450 | 93.6 | Best wear resistance among W-Co alloys impact toughness comparatively low.High speed finishing of small chip section of cast irons,non-ferrous metals& their alloys,hardened-steel and alloy steel. | K01 | |
| ISO | Grade | Typical Property Values | ||||
| Density (g/cm³) | Bending Strength (N/mm³) | Hardness HRA | Performance & Applications | Equivalent to ISO | ||
| M | YT767 | 13.1 | 1800 | 92.8 | High wear resistance and high red hardness, strength and resistance to plastic deformation.Continuous or intermittent cutting of manganese steel and stainless steel. | M10-M20 |
| ZP30.2 | 13.1 | 1800 | 92.8 | High wear resistance and high resistance to plastic derormation.Continuous or intermittent cutting of manganese steel and stainless steel. | M10-M20 | |
| YW1 | 13.4 | 1700 | 92.8 | High red hardness,resistant to impact load.A versatile grade.Machining of common steel,cast irons and hard to machine materials such as refractory steel.manganese steel and stainless steel. | M10 | |
| YW2A | 13 | 1950 | 92 | High red hardness and high strength,resisting high impact load.A versatil grade rough,Machining and seni-finishing of cast irons and hard to machine materials such as refractory steel,manganese steel,stainless steel and advanced alooy steel. | M15 | |
| YW2 | 13.3 | 1800 | 92 | High wear resistance ,strength comparatively higher and resistant to high impact load .roughing and simi-finishing of common steel,cast irons as well as refractory steel,manganese steel,stainless steel and high manganese steel,etc. | M20 | |
| Type | Dimension(mm) | Approx unit weighting(g) | ||||||
| L | t | s | r | YG6 | YG8 | YT5 | YT14 | |
| B5 | 5.0 | 3.0 | 2.0 | 2.0 | 0.5 | 0.4 | 0.4 | 0.3 |
| B6 | 6.0 | 4.0 | 2.5 | 2.5 | 0.8 | 0.8 | 0.6 | 0.6 |
| B8 | 8.0 | 5.0 | 3.0 | 3.0 | 1.7 | 1.6 | 1.5 | 1.3 |
| B10 | 10.0 | 6.0 | 4.0 | 4.0 | 3.2 | 3.1 | 2.7 | 2.4 |
| B12 | 12.0 | 8.0 | 5.0 | 5.0 | 6.1 | 6.1 | 5.5 | 4.8 |
| B16 | 16.0 | 10.0 | 6.0 | 6.0 | 12.7 | 12.7 | 11.1 | 9.8 |
| B20 | 20.0 | 12.0 | 7.0 | 7.0 | 22.4 | 22.4 | 19.6 | 17.2 |
| B25 | 25.0 | 14.0 | 8.0 | 8.0 | 38.4 | 38.4 | 32.2 | 28.4 |
| B32 | 32.0 | 18.0 | 10.0 | 10.0 | 79.5 | 79.0 | 68.4 | 61.0 |
| B40 | 40.0 | 22.0 | 12.0 | 12.0 | 144.0 | 139.0 | 120.0 | 107.0 |
| B50 | 50.0 | 25.0 | 14.0 | 14.0 | 235.0 | 234.0 | 202.0 | 180.0 |
| Type | Dimension(mm) | Approx unit weighting(g) | ||||||
| l | t | s | e | YG6 | YG8 | YT5 | YT14 | |
| A106 | 6.0 | 5.0 | 2.5 | / | 1.1 | 1.1 | 1.0 | 0.9 |
| A108 | 8.0 | 7.0 | 3.0 | / | 2.6 | 2.5 | 2.1 | 1.9 |
| A110 | 10.0 | 6.0 | 3.5 | 0.8 | 2.9 | 2.8 | 2.4 | 2.2 |
| A112 | 12.0 | 10.0 | 4.0 | 0.8 | 6.8 | 6.6 | 5.7 | 5.2 |
| A114 | 14.0 | 12.0 | 4.5 | 0.8 | 10.7 | 10.5 | 8.9 | 8.2 |
| A116 | 16.0 | 10.0 | 5.5 | 0.8 | 12.3 | 12.0 | 10.5 | 9.8 |
| A118 | 18.0 | 12.0 | 7.0 | 0.8 | 21.3 | 20.8 | 17.5 | 16.3 |
| A118A | 18.0 | 16.0 | 6.0 | 0.8 | 24.7 | 24.3 | 21.0 | 19.7 |
| A120 | 20.0 | 12.0 | 7.0 | 0.8 | 23.2 | 22.8 | 20.0 | 18.6 |
| A122 | 22.0 | 15.0 | 8.5 | 0.8 | 39.2 | 38.5 | 33.0 | 30.6 |
| A122A | 22.0 | 18.0 | 7.0 | 0.8 | 39.2 | 38.5 | 32.8 | 30.5 |
| A125 | 25.0 | 15.0 | 8.5 | 0.8 | 44.5 | 43.7 | 36.5 | 34.0 |
| A125A | 25.0 | 20.0 | 10.0 | 0.8 | 71.0 | 69.8 | 58.0 | 53.8 |
| A130 | 30.0 | 16.0 | 10.0 | 0.8 | 66.4 | 65.3 | 56.5 | 51.7 |
| A136 | 36.0 | 20.0 | 10.0 | 0.8 | 98.2 | 96.8 | 81.0 | 75.2 |
| A140 | 40.0 | 18.0 | 10.5 | 1.2 | 105.6 | 103.8 | 88.0 | 81.7 |
| A150 | 50.0 | 20.0 | 10.5 | 1.2 | 149.0 | 146.0 | 125.0 | 116.0 |
| A160 | 60.0 | 22.0 | 10.5 | 1.2 | 197.0 | 193.0 | 168.0 | 156.0 |
| A170 | 70.0 | 25.0 | 12.0 | 1.2 | 298.0 | 293.0 | 257.0 | 239.0 |
| Type | Dimension(mm) | Approx unit weighting(g) | |||||||||
| Right | Left | l | t | s | r | rε | e | YG6 | YG8 | YT5 | YT14 |
| A208 | / | 8.0 | 7.0 | 2.5 | 7.0 | 0.5 | / | 1.4 | 1.4 | 1.3 | 1.3 |
| A210 | / | 10.0 | 8.0 | 3.0 | 8.0 | 10.0 | / | 2.8 | 2.8 | 2.5 | 2.2 |
| A212 | A212Z | 12.0 | 10.0 | 4.5 | 10.0 | 1.0 | 0.8 | 5.4 | 5.3 | 4.5 | 4.2 |
| A216 | A216Z | 16.0 | 14.0 | 6.0 | 14.0 | 1.0 | 0.8 | 13.0 | 12.8 | 11.3 | 10.5 |
| A220 | A220Z | 20.0 | 18.0 | 7.0 | 18.0 | 1.0 | 0.8 | 23.7 | 23.3 | 20.8 | 18.9 |
| A225 | A225Z | 25.0 | 20.0 | 8.0 | 20.0 | 1.0 | 0.8 | 39.9 | 39.2 | 34.7 | 32.6 |
| Type | Dimension(mm) | Approx unit weighting(g) | ||||||||||
| Right | Left | l | t | s | b | r | Φ | Φ 1 | YG6 | YG8 | YT5 | YT14 |
| A515 | A515Z | 15.0 | 10.0 | 4.5 | 5.0 | 10.0 | 45° | 40° | 7.2 | 7.0 | 5.9 | 5.3 |
| A518 | A518Z | 18.0 | 12.0 | 5.5 | 4.0 | 12.0 | 45° | 50° | 11.4 | 11.3 | 9.8 | 8.7 |
Application Scene
Production Process
FAQ
Q1: Is Xingyu trading company or manufacturer ?
A1: We are manufacture of tungsten carbide since established on 1998,specializing in carbide plates/bushings/rollers/special wear parts.
Q2: Has Xingyu acquired the foremost certification of ISO 9001?
A2: Xingyu has been endorsed with the ISO 9001 rating since 2008.
Q3: When can I get the offer after sending inquiry?
A3: We usually quote within 24 hours after we get your inquiry .If
you are very urgent to get the price please call us or tell us in
your email so that we will regard your inquiry priority.
.
Q4: Could Xingyu sales staff be reached anytime for assistance
regarding orders or general enquire ?
A4: Our sales staff operates between 8am-5pm Monday to Saturday.
