Zigong Xingyu Cemented Carbide Dies & Tools Co., Ltd. |
|
Customized Size Hole Diameter Tungsten Carbide Wire Drawing Dies
Wire drawing molds are widely used, such as electronic devices, radar, television, instruments and aerospace and other high-precision wire, as well as commonly used tungsten wire, molybdenum wire, stainless steel wire. Wire cable wire and all kinds of alloy wire are drawn by diamond drawing die. The diamond drawing die has extremely strong wear resistance and long service life because of the use of natural diamond as raw material.
Applications
1. Automotive industry
2. Construction and metal construction industry
3. Electric and electronic industry
4. Jewellery industry
5.Tube and profile drawing tools
6. Bar drawing
Grade List
Grade | Co (wt%) | Density (g/cm³) | Hardness (HRA) | TRS (≥N/mm²) | Applications |
XC100 | 5.8-6.2 | 14.6-15.0 | 91.5-92.5 | 2000 | Wire drawing dies for wear-resistance impact-resistance |
XC101 | 5.8-6.2 | 14.6-15.0 | 91.5-92.5 | 2500 | |
XC200 | 7.8-8.2 | 14.5-14.9 | 91.0-92.0 | 2100 | |
XC201 | 7.8-8.2 | 13.5-14.9 | 91.0-92.0 | 2800 | |
XC300 | 9.8-10.3 | 14.2-14.6 | 90.5-91.5 | 2600 | |
XC301 | 9.8-10.3 | 14.2-14.6 | 90.5-91.5 | 3200 | |
XC500 | 14.7-15.3 | 13.9-14.2 | 87.0-88.0 | 2600 | Stamping dies for impact-resistance |
XC501 | 14.7-15.3 | 13.9-14.2 | 87.0-88.0 | 2800 | |
XC800 | 19.5-20.5 | 13.4-13.6 | 83.0-84.0 | 2600 | |
XC8001 | 19.5-20.5 | 13.4-13.6 | 83.0-84.0 | 3000 | |
XC900 | 23.0-23.5 | 13.1-13.4 | 82.5-83.5 | 2400 | |
XC901 | 23.0-23.5 | 13.1-13.4 | 82.5-83.5 | 2600 | |
Grade | Co+Ni (wt%) | Density (g/cm³) | Hardness (HRA) | TRS (≥N/mm²) | Applications |
XCN61 | 16.0-17.0 | 13.5-14.0 | 83.5-84.5 | 3200 | Stamping dies for High temperature-resistance |
XCN71 | 17.0-18.0 | 13.3-13.8 | 82.0-83.0 | 3000 |
Dimension | |||||
d | l | d1 | h | h1 | ll |
8 | 6 | 0.1-1.0 | 0.1-10.6 | 1.0-2.0 | 0.8-1.2 |
10 | 8 | 0.1-1.2 | 0.1-0.8 | 1.5-4.0 | 1.0-1.8 |
12 | 10 | 0.2-2.0 | 0.1-1.5 | 2.0-5.0 | 1.6-2.5 |
14 | 12 | 0.4-2.5 | 0.2-2.0 | 4.0-5.0 | 1.8-2.5 |
16 | 13 | 0.5-3.0 | 0.2-2.5 | 4.0-5.5 | 2.0-3.0 |
20 | 17 | 1.0-6.0 | 0.6-3.0 | 5.0-8.0 | 2.5-4.0 |
25 | 20 | 2.0-8.5 | 1.0-3.5 | 7.0-10.0 | 3.0-4.5 |
30 | 24 | 3.5-12.0 | 2.0-4.0 | 8.0-12.0 | 3.0-5.0 |
Notice: α=8°10° 12° 14°16°18° β=40° 60° 90° γ=60° 75° 90° |
Dimension | |||||
ΦD | b | H | α | β | γ |
6.0-8.0 | 0..2 | 4.0-6.0 | 10° | 40° | 60° |
6.0-8.0 | 0.4-0.8 | 4.0-6.0 | 40° | * | |
8.0-22.0 | 0.4-5.7 | 6.0-20.0 | 10°-14° | 40° | |
8.0-26.0 | 0.4-8.0 | 6.0-16.0 | 16° | 40° | |
30.0-140.0 | 3.7-84.0 | 21.0-50.0 | 14°-20° | * |
Dimension | |||||
ΦD | Φd | H | α | γ | R |
16.0-110.0 | 2.0-60.0 | 14-52 | 3° | 60° | 40 |
16.0-110.0 | 20.0-62.0 | 35-45 | 4° | 15.0-40.0 | |
16.0-110.0 | 2.8-88.0 | 13-50 | 24° | 3.0-10.0 | |
16.0-110.0 | 20.0-70.0 | 32-55 | * | 3.0-40.0 |
Dimension | |||||
d | l | A | h | h1 | ll |
16 | 12 | 1.5-2.5 | 0.5-1.5 | 4.0-6.0 | 1.0-2.0 |
22 | 18 | 2.0-4.0 | 1.0-2.0 | 5.5-9.0 | 1.5-2.5 |
30 | 21 | 3.5-7.0 | 1.5-2.5 | 8.0-12.0 | 1.5-2.5 |
35 | 25 | 6.5-10.0 | 2.5-3.5 | 10.0-14.0 | 2.0-4.0 |
45 | 25 | 8.0-15.0 | 3.0-4.0 | 10.0-14.0 | 2.0-4.0 |
50 | 28 | 12.0-20.0 | 3.5-4.5 | 12.0-16.0 | 2.0-4.0 |
60 | 30 | 18.0-25.0 | 4.0-5.5 | 12.0-16.0 | 3.0-5.0 |
65 | 32 | 22.0-30.0 | 5.0-7.0 | 12.0-16.0 | 4.0-6.0 |
70 | 35 | 26.0-35.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
80 | 35 | 30.0-40.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
90 | 40 | 35.0-45.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
100 | 40 | 40.0-50.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
120 | 45 | 45.0-55.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
Note:α=14° 16° 20° β=40° γ=60° |
Dimension | ||||||
d | l | A | B | h | h1 | ll |
20 | 12 | 1.5-3.5 | 0.5-1.5 | 1.5-2.5 | 3.0-5.0 | 1.5-2.5 |
22 | 12 | 3.0-5.0 | 0.5-2.0 | 1.5-2.5 | 3.0-5.0 | 1.5-2.5 |
25 | 15 | 3.5-7.0 | 0.5-4.0 | 2.0-3.0 | 4.0-6.0 | 2.0-3.0 |
32 | 16 | 5.0-9.0 | 1.5-4.0 | 2.0-3.0 | 4.0-6.0 | 2.0-3.0 |
35 | 18 | 7.0-12.0 | 1.0-6.0 | 2.0-3.0 | 5.0-8.0 | 2.0-3.0 |
25 | 7.0-12.0 | 2.0-8.0 | 2.5-3.5 | 7.0-13.0 | 2.5-3.5 | |
45 | 20 | 10.0-15.0 | 1.0-7.0 | 2.5-3.5 | 5.0-8.0 | 2.5-3.5 |
25 | 10.0-15.0 | 4.0-10.0 | 3.0-4.0 | 7.0-14.0 | 2.5-3.5 | |
50 | 20 | 12.0-24.0 | 1.0-8.0 | 2.5-3.5 | 5.0-96.0 | 2.5-3.5 |
28 | 12.0-24.0 | 6.0-16.0 | 3.0-4.0 | 8.0-15.0 | 2.5-3.5 | |
60 | 20 | 18.0-32.0 | 1.0-9.0 | 2.5-4.0 | 5.0-10.0 | 2.5-3.5 |
30 | 18.0-32.0 | 7.0-16.0 | 4.0-6.0 | 8.0-16.0 | 3.0-5.0 | |
Note: α=° 14°18° β=40° 60° γ=60° |
Production Process
FAQ
Q1: How can I place order?
A1: You can contact us by email about your order details, or place
order on line.
Q2: How can I pay you?
A2: After you confirm our PI, we will request you to pay. T/T (HSBC
bank) and Paypal, Western Union are the most usual ways we are
using.
Q3: What’s the order procedure?
A3: First we discuss order details, production details by email or
TM. Then we issue you an PI for your confirmation. You will be
requested to do pr -epaid full payment or deposit before we go into
production. After we get the deposit, we start to process the
order. We usually need 7-15 days if we don’t have the items in
stock. Before production has been finished, we will contact you for
shipment details, and the balance payment. After payment has been
settled, we start to prepare the shipment for you.
Q4: How do you take care when your clients received defective
products?
A4: replacement. If there are some defective items, we usually
credit to our customer or replace in next shipment.
Q5: How do you check all the goods in the production line?
A5: We have spot inspection and finished product inspection. We
check the goods when they go into next step production procedure.