Active Member
|
[China]
Address: No. 6 B2 Road, Zigong City, Sichuan Province
Contact name:Philippe
Zigong Xingyu Cemented Carbide Dies & Tools Co., Ltd. |
|
|
CNC Machining Customized Tungsten Carbide Bushing, Cemented Carbide Sleeve
CNC cemenetd caebide sleeves for axle seal
Headed Press Fit Bush is used when the number of parts to be produced does not necessitate the replacement of the bushings during the life of the Jig. The O.D. of Press Fit Bushings can be supplied with grinding stock for fitting in the Customer's Plant or finish ground to a Press Fit size.
Our advantages
1. Use 100% Raw material, strict incoming inspection.
2. Overpressure sintering, increasing the densification of the alloy teeth and increasing the 30% life span.
3. Can be customized according to the requirements of the customer.
Production Process
Milling--Proportioning as required--Wet grinding--Dry--Granulation--Press--Sinter--Inspection--Package
The Product description of tungsten carbide bushing
Tungsten carbide bushing set up by virgin tungsten carbide material. It’s shows high hardness and bending strength. That has superior performance on resisting abrasion and corrosion, which is widely used in many industries.
For its widely usage. Tungsten carbide bushing are often made with high accuracy, and owing to their perfect finish, precise dimension, durability and corrosion resistance. These are highly appreciated by the clients at home and aboard.
In addition, differ from the various of application environment. There are several types of Tungsten carbide bushing. Most of the specifications are all customized.Xingyu Carbide has backed by rich industry knowledge and production experience of various Tungsten carbide bushing. This can produce various of Tungsten carbide bushing based on specific design.
Grade List
| Grade | ISO Code | Chemical Composition(%) | Physical Mechanical Properties (≥) | Application | ||||
| WC | Co | Density g/cm3 | Hardness(HRA) | T.R.S N/mm2 | ||||
| YG3 | K01 | 97 | 3 | 14.90 | 91.00 | 1180 | Suitable for finishing of cast iron,non-ferrous metals,alloys and non-metallic materials,and semi-finishing vehicles for intermittent cutting. | |
| YG6 | K10 | 94 | 6 | 15.10 | 92.00 | 1420 | Finishing of chilled hard alloy cast iron and heat resistant alloy steel and ordinary cast iron. | |
| YG6X | K20 | 94 | 6 | 15.10 | 91.00 | 1600 | Cast iron, non-ferrous metals and alloys, non-metallic materials, medium to cutting, semi-finishing and finishing. | |
| YG8 | K20-K30 | 92 | 8 | 14.90 | 90.00 | 1600 | Suitable for casting of cast iron, non-ferrous metals and their alloys and non-metallic materials, roughing of sections and rough cutting. | |
| YG10 | K40 | 90 | 10 | 14.70 | 89.00 | 1900 | Suitable for the production of drawing dies, wear parts and stamping parts and cores for hard alloy automatic presses. | |
| YG10X | K40 | 89 | 10 | 14.70 | 89.50 | 2200 | Suitable for small diameter micro drills, end mills, rotary boring tools, etc. | |
| YG15 | K30 | 85 | 15 | 14.70 | 87.00 | 2100 | Forging, perforating and stamping tools for steel bars and steel tubes with high compression ratios and working under large stresses. | |
| YG20 | K30 | 80 | 20 | 13.70 | 85.50 | 2500 | Stamping die, stamping watch parts, musical instrument spring piece. | |
| YG20C | K40 | 80 | 20 | 13.70 | 82.00 | 2200 | punching battery case, toothpaste skin mold, small size steel ball, screw, nut stamping die, hot rolling twist drill bit plate. | |
| YG30 | G60 | 70 | 30 | 12.80 | 82.00 | 2750 | Production of standard parts, bearings, tools and other industries for cold heading, cold punching, cold pressing die. | |
Details Carbide Bushing
| Deimensions of A Type Straight Sleeves (mm) | ||||
| D | d | C | F | H |
| 13.0-59.0 | 3.0-51.0 | 8.0-56.0 | 22.5 | 25.5 |
| 35.0-51.0 | 22.0-37.0 | 28.0-41.0 | 11.0-13.0 | 15.0-25.0 |
| Notice:a=1.6, 3.2 | ||||
| Deimensions of A Type Straight Sleeves (mm) | ||||
| D | d | C | F | H |
| 13.0-59.0 | 3.0-51.0 | 8.0-556.0 | 22.5 | 25.5 |
| 35.0-51.0 | 22.0-37.0 | 28.0-41.0 | 11.0-16.0 | 15.0-25.0 |
| Deimensions of A Type Straight Sleeves (mm) | ||||
| Type No. | D | d | H | C |
| XA1 | 14.5-20 | 12.16 | 6.0-10.0 | 1.3 |
| XA2 | 12.5 | 3.5-7.0 | 12.7 | 4.5 |
| XA3 | 21-60 | 15-50 | 51 | 3 |
| XA4 | 75-130 | 60-115 | 55-100 | 6 |
| XA5 | 140-300 | 120-200 | 60-150 | 10 |
| Deimensions of A Type Straight Sleeves (mm) | |||
| D | d | C | H |
| 25.0-30.0 | 9.0-14.0 | 2.0-3.5 | 21.0-25.0 |
| 31.0-50.0 | 14.0-35.0 | 2.0-3.5 | 21.0-25.0 |
| 60.0-100.0 | 47.0-85.0 | 2.0-3.5 | 30.0-70.0 |
Product Application Scene
Production Process
FAQ
Q1: Can I negotiate the Prices?
A1: Yes.
Q1: What is your minimum order requirement?
A1: We accept the sample and trial order.
Q1: How long will it take to execute my order?
A1: For the stock items, we can arrange the shipment within 3-5
days after received your payment.
Q3: Can you give warranty of your products?
A3: Yes, we extend a 100% satisfaction guarantee on all items. The
detailed inspection pictures and the report of the order will be
sent to you for confirmation before delivery. For the overseas
orders, if there is quality problem, please kind to provide the
pictures to show the problems by e-mail . We will provide the
replacements to you at our cost according to actual conditions.
