Active Member
|
[China]
Address: No. 6 B2 Road, Zigong City, Sichuan Province
Contact name:Philippe
Zigong Xingyu Cemented Carbide Dies & Tools Co., Ltd. |
|
|
Rectangular Tungsten Carbide Flat Bar For Profile Cutter Applied In Woodworking
Tungsten carbide strips introduction
Main features: wear resistant and corrosion resistant
Application: cutting tools , moulds , oil and automobile industry
carbide strip is used as the cutter for the TCT woodworking knives
for cutting all kinds of original wood , hard wood , HDF, MDF ,
plywood , particle board , laminated board, composite material
,grass, aluminum and metals . It can give much more excellent
performance than HSS
Application of tungsten carbide strips
Good for general purposes and easy to weld, suitable for cutting
soft and hard wood
Super comprehensive performance with a good performance to price
rate, suitable for cutting fiber boards of a high density
Thickness, width, as well as Length can be various. If you have
interest in purchasing our products, kindly please provide us the
following
Necessary information for production
1. specific dimensions including length, width, and thickness;
2. dimension tolerance if you have;
3. surface condition: sintered blank or grinding;
4. quantity;
5. tungsten carbide grade or chemical composition.
Details of tungsten carbide plate
| Grade | YG6A | YG8 | YG15 | YG20 | YS2T | |
| ISO Code | K10 | K20 | K30-40 | K05 | K10-K20 | |
| Co | % | 6 | 8 | 15 | 20 | 15 |
| Wc | % | 94 | 92 | 85 | 80 | 85 |
| Density | G/cm3 | 14.9 | 14.7 | 14.5 | 13.5 | 14.5 |
| T.R.S | Mpa | 1850 | 2400 | 2500 | 2800 | 2350 |
| Hardness | HRA | 92 | 89.5 | 87.5 | 85.5 | 92 |
Grade List
| Grade | ISO Code | Chemical Composition(%) | Physical Mechanical Properties (≥) | Application | ||||
| WC | Co | Density g/cm3 | Hardness(HRA) | T.R.S N/mm2 | ||||
| YG3 | K01 | 97 | 3 | 14.90 | 91.00 | 1180 | Suitable for finishing of cast iron,non-ferrous metals,alloys and non-metallic materials,and semi-finishing vehicles for intermittent cutting. | |
| YG6 | K10 | 94 | 6 | 15.10 | 92.00 | 1420 | Finishing of chilled hard alloy cast iron and heat resistant alloy steel and ordinary cast iron. | |
| YG6X | K20 | 94 | 6 | 15.10 | 91.00 | 1600 | Cast iron, non-ferrous metals and alloys, non-metallic materials, medium to cutting, semi-finishing and finishing. | |
| YG8 | K20-K30 | 92 | 8 | 14.90 | 90.00 | 1600 | Suitable for casting of cast iron, non-ferrous metals and their alloys and non-metallic materials, roughing of sections and rough cutting. | |
| YG10 | K40 | 90 | 10 | 14.70 | 89.00 | 1900 | Suitable for the production of drawing dies, wear parts and stamping parts and cores for hard alloy automatic presses. | |
| YG10X | K40 | 89 | 10 | 14.70 | 89.50 | 2200 | Suitable for small diameter micro drills, end mills, rotary boring tools, etc. | |
| YG15 | K30 | 85 | 15 | 14.70 | 87.00 | 2100 | Forging, perforating and stamping tools for steel bars and steel tubes with high compression ratios and working under large stresses. | |
| YG20 | K30 | 80 | 20 | 13.70 | 85.50 | 2500 | Stamping die, stamping watch parts, musical instrument spring piece. | |
| YG20C | K40 | 80 | 20 | 13.70 | 82.00 | 2200 | punching battery case, toothpaste skin mold, small size steel ball, screw, nut stamping die, hot rolling twist drill bit plate. | |
| YG30 | G60 | 70 | 30 | 12.80 | 82.00 | 2750 | Production of standard parts, bearings, tools and other industries for cold heading, cold punching, cold pressing die. | |
| ISO Code | Grain Size (μm) | Co (mass) % | TRS (GPa) *1 | Hardness | Application | Work Material | |||||||
| HRA *2 | HV *3 | For Automatic Lathes | Cemented Carbide Plates | General Steel | Stainless Steel | Cast Iron | Non-ferrous Metal | Heat Resistant Alloy | |||||
| Cemented Carbide | K20 | ＜0.9 | 10 | 2.5 | 91 | 1550 | √ | √ | O | ||||
| K10 | ＜1.0 | 6 | 2 | 92 | 1700 | √ | √ | O | O | ||||
| M20 | ＜3.0 | 9 | 2 | 90.5 | 1450 | √ | √ | O | O | ||||
| Cermet | P10 | ＜2.0 | 18 | 2 | 91.2 | 1500 | √ | O | |||||
| P20 | ＜2.0 | 19 | 2 | 90.5 | 1450 | √ | O | ||||||
Detail Specification For Tungsten Carbide Strips
| Type Number | Dimensions(mm) | |||||
| L | L | T | ||||
| 18*13*T | 18 | ±0.5 | 13 | ±0.4 | 2~8 | ﹢0.5 |
| 18*15*T | 18 | ±0.5 | 15 | ±0.4 | 2~8 | ﹢0.5 |
| 18*18*T | 18 | ±0.5 | 18 | ±0.4 | 2~12 | ﹢0.5 |
| 19*5*T | 19 | ±0.5 | 5 | ±0.3 | 2~8 | ﹢0.5 |
| 19*8*T | 19 | ±0.5 | 8 | ±0.3 | 2~8 | ﹢0.5 |
| 19*11*T | 19 | ±0.5 | 11 | ±0.4 | 2~8 | ﹢0.5 |
| 19*13*T | 19 | ±0.5 | 13 | ±0.4 | 2~8 | ﹢0.5 |
| 20*2*T | 20 | ±0.5 | 2 | ±0.3 | 2~4 | ﹢0.5 |
| 20*3*T | 20 | ±0.5 | 3 | ±0.3 | 2~5 | ﹢0.5 |
| 20*4*T | 20 | ±0.5 | 4 | ±0.3 | 2~7 | ﹢0.5 |
| 20**T | 20 | ±0.5 | 5 | ±0.3 | 2~8 | ﹢0.5 |
| 20*3*T | 20 | ±0.5 | 6 | ±0.3 | 2~8 | ﹢0.5 |
| 20*7*T | 20 | ±0.5 | 7 | ±0.3 | 2~8 | ﹢0.5 |
| 20*8*T | 20 | ±0.5 | 8 | ±0.3 | 2~7 | ﹢0.5 |
| 20*9*T | 20 | ±0.5 | 9 | ±0.3 | 2~8 | ﹢0.5 |
| 20*10*T | 20 | ±0.5 | 10 | ±0.3 | 2~8 | ﹢0.5 |
| 20*12*T | 20 | ±0.5 | 12 | ±0.4 | 2~8 | ﹢0.5 |
| 20*15*T | 20 | ±0.5 | 15 | ±0.4 | 2~12 | ﹢0.5 |
| 20*18*T | 20 | ±0.5 | 18 | ±0.4 | 2~12 | ﹢0.5 |
| 20*20*T | 20 | ±0.5 | 20 | ±0.4 | 2~12 | ﹢0.5 |
| 21*3*T | 21 | ±0.5 | 3 | ±0.3 | 2~7 | ﹢0.5 |
| 21*7*T | 21 | ±0.5 | 7 | ±0.3 | 2~7 | ﹢0.5 |
| 21*8*T | 21 | ±0.5 | 8 | ±0.3 | 2~8 | ﹢0.5 |
| 21*9*T | 21 | ±0.5 | 9 | ±0.3 | 2~8 | ﹢0.5 |
| 21*13*T | 21 | ±0.5 | 13 | ±0.4 | 2~7 | ﹢0.5 |
| 21*20*T | 21 | ±0.5 | 20 | ±0.4 | 2~12 | ﹢0.5 |
| 21*21*T | 21 | ±0.5 | 21 | ±0.4 | 2~12 | ﹢0.5 |
| 22*3*T | 22 | ±0.5 | 3 | ±0.3 | 2~6 | ﹢0.5 |
| 22*5*T | 22 | ±0.5 | 5 | ±0.3 | 2~8 | ﹢0.5 |
| 22*8*T | 22 | ±0.5 | 8 | ±0.3 | 2~8 | ﹢0.5 |
| 22*12*T | 22 | ±0.5 | 12 | ±0.4 | 2~8 | ﹢0.5 |
| 22*15*T | 22 | ±0.5 | 15 | ±0.4 | 2~8 | ﹢0.5 |
| 22*22*T | 22 | ±0.5 | 22 | ±0.4 | 2~26 | ﹢0.5 |
| 23*4*T | 23 | ±0.5 | 4 | ±0.3 | 2~7 | ﹢0.5 |
| 23*8*T | 23 | ±0.5 | 8 | ±0.3 | 2~8 | ﹢0.5 |
| 23*14*T | 23 | ±0.5 | 14 | ±0.4 | 2~12 | ﹢0.5 |
| 24*10*T | 24 | ±0.5 | 10 | ±0.3 | 2~8 | ﹢0.5 |
| 24*12*T | 24 | ±0.5 | 12 | ±0.4 | 2~6 | ﹢0.5 |
| 24*24*T | 24 | ±0.5 | 24 | ±0.4 | 2~12 | ﹢0.5 |
| 25*4*T | 25 | ±0.5 | 4 | ±0.3 | 2~8 | ﹢0.5 |
| Type Number | Dimensions(mm) | |||||
| L | L | T | ||||
| 25*6*T | 25 | ±0.5 | 6 | ±0.3 | 2~8 | ﹢0.5 |
| 25*8*T | 25 | ±0.5 | 8 | ±0.3 | 2~8 | ﹢0.5 |
| 25*9*T | 25 | ±0.5 | 9 | ±0.3 | 2~11 | ﹢0.5 |
| 25*10*T | 25 | ±0.5 | 10 | ±0.3 | 2~12 | ﹢0.5 |
| 25*11*T | 25 | ±0.5 | 11 | ±0.4 | 2~8 | ﹢0.5 |
| 25*12*T | 25 | ±0.5 | 12 | ±0.4 | 2~12 | ﹢0.5 |
| 25*15*T | 25 | ±0.5 | 15 | ±0.4 | 2~10 | ﹢0.5 |
| 25*17*T | 25 | ±0.5 | 17 | ±0.4 | 2~10 | ﹢0.5 |
| 26*4*T | 26 | ±0.5 | 4 | ±0.3 | 2~8 | ﹢0.5 |
| 26*7*T | 26 | ±0.5 | 7 | ±0.3 | 2~8 | ﹢0.5 |
| 26*8*T | 26 | ±0.5 | 8 | ±0.3 | 2~8 | ﹢0.5 |
| 26*9*T | 26 | ±0.5 | 9 | ±0.3 | 2~8 | ﹢0.5 |
| 27*5*T | 27 | ±0.5 | 5 | ±0.3 | 2~8 | ﹢0.5 |
| 27*7*T | 27 | ±0.5 | 7 | ±0.3 | 2~7 | ﹢0.5 |
| 27*12*T | 27 | ±0.5 | 12 | ±0.4 | 2~8 | ﹢0.5 |
| 28*11*T | 28 | ±0.5 | 11 | ±0.4 | 2~12 | ﹢0.5 |
| 28*12*T | 28 | ±0.5 | 12 | ±0.4 | 2~8 | ﹢0.5 |
| 28*14*T | 28 | ±0.5 | 14 | ±0.4 | 2~14 | ﹢0.5 |
| 28*15*T | 28 | ±0.5 | 15 | ±0.4 | 2~8 | ﹢0.5 |
| 29*3*T | 29 | ±0.5 | 3 | ±0.3 | 2~8 | ﹢0.5 |
| 30*3*T | 30 | ±0.5 | 3 | ±0.3 | 2~8 | ﹢0.5 |
| 30*5*T | 30 | ±0.5 | 5 | ±0.3 | 2~8 | ﹢0.5 |
| 30*6*T | 30 | ±0.5 | 6 | ±0.3 | 2~10 | ﹢0.5 |
| 30*9*T | 30 | ±0.5 | 9 | ±0.3 | 2~11 | ﹢0.5 |
| 30*10*T | 30 | ±0.5 | 10 | ±0.3 | 2~12 | ﹢0.5 |
| 30*16*T | 30 | ±0.5 | 16 | ±0.4 | 2~12 | ﹢0.5 |
| 30*20*T | 30 | ±0.5 | 20 | ±0.4 | 2~10 | ﹢0.5 |
| 30*25*T | 30 | ±0.5 | 25 | ±0.5 | 2~14 | ﹢0.5 |
| 31*4*T | 31 | ±0.5 | 4 | ±0.3 | 2~7 | ﹢0.5 |
| 31*5*T | 31 | ±0.5 | 5 | ±0.3 | 2~13 | ﹢0.5 |
| 31*6*T | 31 | ±0.5 | 6 | ±0.3 | 2~10 | ﹢0.5 |
| 31*21*T | 31 | ±0.5 | 21 | ±0.4 | 2~12 | ﹢0.5 |
| 32*12*T | 32 | ±0.5 | 12 | ±0.4 | 2~15 | ﹢0.5 |
| 33*5*T | 33 | ±0.5 | 5 | ±0.3 | 2~12 | ﹢0.5 |
| 33*12*T | 33 | ±0.5 | 12 | ±0.4 | 2~7 | ﹢0.5 |
| 33*18*T | 33 | ±0.5 | 18 | ±0.4 | 2~11 | ﹢0.5 |
| 33*22*T | 33 | ±0.5 | 22 | ±0.4 | 2~10 | ﹢0.5 |
| 35*4*T | 35 | ±0.5 | 4 | ±0.3 | 2~8 | ﹢0.5 |
| 35*8*T | 35 | ±0.5 | 8 | ±0.3 | 2~12 | ﹢0.5 |
| 35*10*T | 35 | ±0.5 | 10 | ±0.3 | 2~14 | ﹢0.5 |
| Type Number | Dimensions(mm) | |||||
| L | L | T | ||||
| 35*13*T | 35 | ±0.7 | 13 | ±0.4 | 2~12 | ﹢0.5 |
| 35*20*T | 35 | ±0.7 | 20 | ±0.4 | 2~12 | ﹢0.5 |
| 36*5*T | 36 | ±0.7 | 5 | ±0.3 | 2~12 | ﹢0.5 |
| 36*7*T | 36 | ±0.7 | 7 | ±0.3 | 2~10 | ﹢0.5 |
| 36*9*T | 36 | ±0.7 | 9 | ±0.3 | 2~7 | ﹢0.5 |
| 38*24*T | 38 | ±0.7 | 24 | ±0.4 | 2~11 | ﹢0.5 |
| 39*4*T | 39 | ±0.7 | 4 | ±0.3 | 2~8 | ﹢0.5 |
| 39*28*T | 39 | ±0.7 | 28 | ﹢0.5 | 2~12 | ﹢0.5 |
| 40*2*T | 40 | ±0.7 | 2 | ±0.3 | 2~10 | ﹢0.5 |
| 40*4*T | 40 | ±0.7 | 4 | ±0.3 | 2~12 | ﹢0.5 |
| 40*6*T | 40 | ±0.7 | 6 | ±0.3 | 2~12 | ﹢0.5 |
| 40*10*T | 40 | ±0.7 | 10 | ±0.2 | 2~11 | ﹢0.5 |
| 40*15*T | 40 | ±0.7 | 15 | ±0.4 | 2~15 | ﹢0.5 |
| 40*16*T | 40 | ±0.7 | 16 | ±0.4 | 2~12 | ﹢0.5 |
| 42*20*T | 42 | ±0.7 | 20 | ±0.4 | 2~11 | ﹢0.5 |
| 43*9*T | 43 | ±0.7 | 9 | ±0.3 | 2~12 | ﹢0.5 |
| 45*6*T | 45 | ±0.7 | 6 | ±0.3 | 2~12 | ﹢0.5 |
| 47*2*T | 47 | ±0.7 | 2 | ±0.3 | 2~12 | ﹢0.5 |
| 50*2*T | 50 | ±1.5 | 2 | ﹢0.3 | 2~10 | ﹢0.5 |
| 50*3*T | 50 | ±1.5 | 3 | ﹢0.3 | 2~12 | ﹢0.5 |
| 50*4*T | 50 | ±1.5 | 4 | ﹢0.3 | 2~11 | ﹢0.5 |
| 50*5*T | 50 | ±1.5 | 5 | ﹢0.3 | 2~11 | ﹢0.5 |
| 50*6*T | 50 | ±1.5 | 6 | ﹢0.3 | 2~14 | ﹢0.5 |
| 50*7*T | 50 | ±1.5 | 7 | ﹢0.4 | 2~8 | ﹢0.5 |
| 50*8*T | 50 | ±1.5 | 8 | ﹢0.4 | 2~12 | ﹢0.5 |
| 50*9*T | 50 | ±1.5 | 9 | ﹢0.4 | 2~10 | ﹢0.5 |
| 50*10*T | 50 | ±1.5 | 10 | ﹢0.4 | 2~12 | ﹢0.5 |
| 50*12*T | 50 | ±1.5 | 12 | ﹢0.5 | 2~12 | ﹢0.5 |
| 50*15*T | 50 | ±1.5 | 15 | ﹢0.5 | 2~15 | ﹢0.5 |
| 51*3*T | 51 | ±1.5 | 3 | ﹢0.3 | 2~12 | ﹢0.5 |
| 51*4*T | 51 | ±1.5 | 4 | ﹢0.3 | 2~10 | ﹢0.5 |
| 51*5*T | 51 | ±1.5 | 5 | ﹢0.3 | 2~12 | ﹢0.5 |
| 51*12*T | 51 | ±1.5 | 12 | ﹢0.5 | 2~12 | ﹢0.5 |
| 52*3*T | 52 | ±1.5 | 3 | ﹢0.3 | 2~12 | ﹢0.5 |
| Type Number | Dimensions(mm) | |||||
| L | L | T | ||||
| 52*4*T | 52 | ±1.5 | 4 | ﹢0.3 | 2~12 | ﹢0.5 |
| 55*6*T | 55 | ±1.5 | 6 | ﹢0.3 | 2~12 | ﹢0.5 |
| 55*20*T | 55 | ±1.5 | 20 | ﹢0.5 | 2~12 | ﹢0.5 |
| 55*30*T | 55 | ±1.5 | 30 | ±1.0 | 2~11 | ﹢0.5 |
| 60*2*T | 60 | ±1.5 | 2 | ±0.3 | 2~13 | ﹢0.5 |
| 60*3*T | 60 | ±1.5 | 3 | ±0.3 | 2~10 | ﹢0.5 |
| 60*6*T | 60 | ±1.5 | 6 | ±0.3 | 2~10 | ﹢0.5 |
| 60*30*T | 60 | ±1.5 | 30 | ﹢0.6 | 2~11 | ﹢0.5 |
| 65*35*T | 65 | ﹢2.0 | 35 | ﹢0.8 | 2~15 | ﹢0.5 |
| 70*4*T | 70 | ﹢2.0 | 4 | ±0.3 | 2~13 | ﹢0.5 |
| 70*7*T | 70 | ﹢2.0 | 7 | ±0.4 | 2~11 | ﹢0.5 |
| 80*2*T | 80 | ﹢2.0 | 2 | ±0.3 | 2~12 | ﹢0.5 |
| 80*7*T | 80 | ﹢2.0 | 7 | ±0.4 | 2~10 | ﹢0.5 |
| 81*3*T | 81 | ﹢2.0 | 3 | ±0.3 | 2~13 | ﹢0.5 |
| 81*4*T | 81 | ﹢2.0 | 4 | ±0.3 | 2~11 | ﹢0.5 |
| 87*27*T | 87 | ﹢2.0 | 27 | ﹢0.6 | 2~11 | ﹢0.5 |
| 100*2*T | 100 | ﹢5.0 | 2 | ﹢0.5 | 2~12 | ﹢0.5 |
| 100*6*T | 100 | ﹢2.5 | 6 | ﹢0.5 | 2~12 | ﹢0.5 |
| 100*8*T | 100 | ﹢2.5 | 8 | ﹢0.5 | 2~12 | ﹢0.5 |
| 103*2.5*T | 103 | ﹢5.0 | 2.5 | ﹢0.5 | 2~12 | ﹢0.5 |
| 103*3*T | 103 | ﹢5.0 | 3 | ﹢0.5 | 2~12 | ﹢0.5 |
| 103*4*T | 103 | ﹢5.0 | 4 | ﹢0.5 | 2~12 | ﹢0.5 |
| 103*5*T | 103 | ﹢5.0 | 5 | ﹢0.5 | 2~12 | ﹢0.5 |
| 110*2.5*T | 110 | ﹢2.5 | 2.5 | ﹢0.5 | 2~12 | ﹢0.5 |
| 110*3*T | 110 | ﹢2.5 | 3 | ﹢0.5 | 2~12 | ﹢0.5 |
| 110*4*T | 110 | ﹢2.5 | 4 | ﹢0.5 | 2~12 | ﹢0.5 |
| 110*5*T | 110 | ﹢2.5 | 5 | ﹢0.5 | 2~12 | ﹢0.5 |
| 110*6*T | 110 | ﹢2.5 | 6 | ﹢0.5 | 2~12 | ﹢0.5 |
| 120*3*T | 120 | ﹢2.5 | 3 | ﹢0.5 | 2~12 | ﹢0.5 |
| 120*4*T | 120 | ﹢2.5 | 4 | ﹢0.5 | 2~12 | ﹢0.5 |
| 120*5*T | 120 | ﹢2.5 | 5 | ﹢0.5 | 2~12 | ﹢0.5 |
| 140*2*T | 140 | ﹢2.5 | 2 | ﹢0.5 | 2~12 | ﹢0.5 |
| 140*3*T | 140 | ﹢2.5 | 3 | ﹢0.5 | 2~12 | ﹢0.5 |
| 140*4*T | 140 | ﹢2.5 | 4 | ﹢0.5 | 2~12 | ﹢0.5 |
Production Process
FAQ
Q1: Is Xingyu trading company or manufacturer ?
A1: We are manufacture of tungsten carbide since established on 1998,specializing in carbide plates/bushings/rollers/special wear parts.
Q2: Has Xingyu acquired the foremost certification of ISO 9001?
A2: Xingyu has been endorsed with the ISO 9001 rating since 2008.
Q3: When can I get the offer after sending inquiry?
A3: We usually quote within 24 hours after we get your inquiry .If
you are very urgent to get the price please call us or tell us in
your email so that we will regard your inquiry priority.
Q4: Could Xingyu sales staff be reached anytime for assistance
regarding orders or general enquire ?
A4: Our sales staff operates between 8am-5pm Monday to Saturday.
