Active Member
|
[China]
Address: No.596 Xingdong Road, Tianyuan District, Zhuzhou City, Hunan Province, China
Contact name:Christine
ZHUZHOU SEEGO CARBIDE TOOLS CO., LTD. |
|
|
Yg8/K20 Od25*ID12*1.8mm Sharpen Tungsten Carbide Circular Cutter Blades for MDF
Performance Requirement Of Tungsten Carbide Saw Tips
The chemical composition and physical mechanical properties of the
sawtooth are in accordance with the table
| Grade | Density g/cm3 | T.R.S Mpa | Hardness HRA | Performance & application recommended |
| YG6X | 14.9 | 1850 | 92 | Fine grain alloy, good wear resistance. Semifinishing of chilled cast iron, non-ferrors metals alloys, semi-finishing and finishing of hardened steel, alloy steel. |
| YG6 | 14.9 | 2450 | 90.5 | High wear resistance, bending strength, suitable for electronic industry with the disc cutting knife. |
| YG8 | 14.8 | 2450 | 90.5 | High strength, impact and shock resistance higher than YG6X, but wear resistance and cutting speed comparatively lower. Roughing of cast irons, non-ferrors metals and their alloys as well as non metallic materials at low cutting speed. |
| YG10X | 14.7 | 2320 | 89.5 | High strength in use, impact and shock resistance higher than YG6, but wear resistance and cutting speed comparatively lower. Roughing of cast irons, non-ferrors metals and their alloys as well as. |
| YS2T | 14.5 | 2200 | 91 | Fine grain alloy, good wear resistance. Used for processing hard wood, veneer board, PCB, PVC and metals. |
Advantage:
1. promise the 100% virgin material .
2. Sintere by vacuum sintering furnace and HIP machine with
excellent specifications without any sand hole.
3. suply blank or polished sharpen blade carbide circular cutter
4. more than 150 sets moulds for different sizes.
5. Grades: YG6,YG6X,YG8,YG10X.YS2T etc for choosing.
6. we can product the goods according your drawing and sizes.
Note: Welcome------customizable for individual requirements.
