Active Member
|
[China]
Address: No.596 Xingdong Road, Tianyuan District, Zhuzhou City, Hunan Province, China
Contact name:Christine
ZHUZHOU SEEGO CARBIDE TOOLS CO., LTD. |
|
|
Hot Selling Tungsten Carbide Square Head End Mills 2 / 3 / 4 / 6
Flutes
Discription:
1. Square end milling cutters are also known as a "flat end mills".
The corners of these mills are sharp and generate a 90° angle.
2. They can be single end or double end and they can be made from
solid carbide or various compositions of high speed steel.
3. Carbide square end mills are the most productive. They can be
general purpose or high performance geometries.
4. They can be used used for plunging, grooving, side milling, face
milling, and counter boring.
5. These are the most popular milling cutters in the industry.
6. They are available in a wide variety of diameter sizes.
Specifications of square head End Mills:
| Description | D | Lc | L | d | z | |
| Standard Length | 1.0~6.0 | 3.0~16 | 50 | 3~6 | 4 | |
| 6.0~8.0 | 16~20 | 60 | 6~8 | 4 | ||
| 8.5~12.0 | 20~30 | 75 | 10~12 | 4 | ||
| 14.0~25.0 | 40~50 | 100 | 14~25 | 4 | ||
| With Long Flutes Length | 3.0~6.0 | 4.0~6.0 | 75 | 12~21 | 4 | |
| 3.0~12.0 | 4.0~12.0 | 100 | 12~45 | 4 | ||
| 6.0~25.0 | 6.0~25.0 | 150 | 45~75 | 4 | ||
| With Long Shank Length | 6.0~8.0 | 16~20 | 75 | 6~8 | 4 | |
| 8.0~12.0 | 16~30 | 100 | 6~12 | 4 | ||
| 10.0~12.0 | 25~30 | 150 | 10~12 | 4 | ||
| With Stub Length | 4.0~6.0 | 2.0~9.0 | 50 | 1~6 | 4 | |
| 8.0 | 10~12 | 60 | 8 | 4 | ||
| 10.0 | 15 | 75 | 10 | 4 | ||
| 12.0 | 18 | 75 | 12 | 4 | ||
| 16 | 24 | 100 | 16 | 4 | ||
Coating:
| Coating Sheet | |||||
| Coating Type | TiAIN | ALTiN | TiSiN | Nano | |
| Hardness(HV) | 2800 | 3200 | 3600 | 42(GPA) | |
| Thickness(UM) | 2.5-3 | 2.5-3 | 3 | 3 | |
| Oxidation Temp(°) | 800 | 900 | 1000 | 1200 | |
| Friction Coeffient | 0.3 | 0.3 | 0.45 | 0.4 | |
| Color | Violet | Black | Copper | Blue | |
TiAIN
A special multilayer coating for edge retention and corrosion
resistance when used on a wide range of materials including iron
based, hardened steels, and stainless steels. Typically TiAIN is
used in applications with lower cutting speeds than TiSiN and ALTiN
but often improves the tool's lifetime by a factor of three or
more.
ALTiN
A general purpose coating that offers improved wear resistance to
abrasive, adhesive, or difficult to machine materials such as cast
iron, aluminum alloys, steels, copper and more. This is a common
used substitute when the advantages of TiAIN cannot be used, as in
applications that cannot generate the speeds and feeds required for
higher cutting temperatures. ALTiN is harder and more impact
resistant than TiAIN and can improve tool life.
TiSiN
This is a high performance coating for milling, tapping and
drilling in stainless steels, carbon steels, alloy steels, and cast
iron. This coating is extremely heat resistant and can be used with
or without coolant. It is exceptional in difficult to machine
materials where adhesive wear is particularly high and can be run
at much higher speeds and feeds than all other coatings.
