|
[China]
Trade Verify
Address: Room 411, Building B, Smart Cube, No. 460, Jinshan Road, Hetang District, Zhuzhou City, Hunan Province
Contact name:Victor
Zhuzhou Weikeduo Cemented Carbide Co., Ltd. |
|
Verified Suppliers
|
|
|
14.6*9.8*5mm Tungsten Carbide Inserts High Temperature Resistance
Tungsten Carbide Inserts Introduction
This SS10 Tungsten Carbide Inserts is widely used in cutting
limestone, tuff, granite, marble and other stone.
In order to achieve the best performance, it is very important to
choose the carbide grade suitable for your application. Our
experienced engineers can help you with the design and material
selection to ensure the best wear for your specific needs.
SS10 Tungsten Carbide Inserts Features
SS10 Tungsten Carbide Inserts Mains Grade
| Grade No. | Density (g/cm³) | Hardness (HRA) | T·R·S (MPa) | Application Recommended |
| YG6 | 15.80 | 89.5 | 1700 | Mainly used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
| YG8 | 14.70 | 88.5 | 2300 | Mainly used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations. |
Size
| 13*7*5mm | 16*12*3.2mm | 20*12*3.2mm |
| 14.6*9.8*5mm | 18*12*3.35mm | 20*12*3.35mm |
| 14*10*4.7mm | 19.6*11.9*2.9mm | 20*12*3.4mm |
| 20*12*3.5mm |
Our Services
