|
[China]
Trade Verify
Address: Room 411, Building B, Smart Cube, No. 460, Jinshan Road, Hetang District, Zhuzhou City, Hunan Province
Contact name:Victor
Zhuzhou Weikeduo Cemented Carbide Co., Ltd. |
|
Verified Suppliers
|
|
|
2/4/6 Flute Solid Carbide End Mills High Precision CNC End Mill Bits For Aluminum
CNC Tungsten Carbide Flute End Mill for Aluminum
CNC milling of aluminum can be difficult, because the material can stick to the flutes and the chips can pack. Today's high performance cutting tools for aluminum have large flutes to yield the maximum metal removal rates possible. They also feature eccentric grinding on the outside diameters of the bits to give them strength and stability, and large flute gullets for high metal removal rates. Aluminum milling bits are available in square end and ball end mill geometries. They are also available in 1, 2 and 3 flute end mill designs. These are the best carbide end mill bits for aluminum milling!
Advantages CNC Tungsten Carbide Flute End Mill for Aluminum
§ Innovative new geometries designed in conjunction. The benefit is a range of state-of-the-art carbide cutting tools with superior performance.
§ Sub-micron carbide grade of origin.
§ Optimal flute geometry delivers maximum metal removal rates and better chip evacuation.
§ Effective in a full range of machine speeds.
§ Only one tool is needed for use in roughing and finishing operations.
§ Can take deeper and wider cuts – axial and radial.
§ Shank tolerances to h6.
§ Reinforced corner by extra positive dubbing for long tool life.
§ Centre cutting with drilling possibility.
§ Designed to works standard over the 1mm to 20mm diameter range.
§ Multiple corner radii and extended neck configurations are available to maximise metal removal rates.
| SIZE | D | d | H | L | Z |
| AL-2E-D1.0 | 1 | 4 | 3 | 50 | 2 |
| AL-2E-D1.5 | 1.5 | 4 | 4 | 50 | 2 |
| AL-2E-D2.0 | 2 | 4 | 6 | 50 | 2 |
| AL-2E-D2.5 | 2.5 | 4 | 7 | 50 | 2 |
| AL-2E-D3.0 | 3 | 6 | 9 | 50 | 2 |
| AL-2E-D4.0 | 4 | 6 | 12 | 50 | 2 |
| AL-2E-D5.0 | 5 | 6 | 15 | 50 | 2 |
| AL-2E-D6.0 | 6 | 6 | 18 | 60 | 2 |
| AL-2E-D8.0 | 8 | 8 | 20 | 60 | 2 |
| AL-2E-D10.0 | 10 | 10 | 30 | 75 | 2 |
| AL-2E-D12.0 | 12 | 12 | 32 | 75 | 2 |
| AL-2E-D16.0 | 16 | 16 | 45 | 100 | 2 |
| AL-2E-D20.0 | 20 | 20 | 45 | 100 | 2 |
| SIZE | D | d | H | L | Z |
| AL-3E-D1.0 | 1 | 4 | 3 | 50 | 3 |
| AL-3E-D1.5 | 1.5 | 4 | 4 | 50 | 3 |
| AL-3E-D2.0 | 2 | 4 | 6 | 50 | 3 |
| AL-3E-D2.5 | 2.5 | 4 | 7 | 50 | 3 |
| AL-3E-D3.0 | 3 | 6 | 9 | 50 | 3 |
| AL-3E-D4.0 | 4 | 6 | 12 | 50 | 3 |
| AL-3E-D5.0 | 5 | 6 | 15 | 50 | 3 |
| AL-3E-D6.0 | 6 | 6 | 18 | 60 | 3 |
| AL-3E-D8.0 | 8 | 8 | 20 | 60 | 3 |
| AL-3E-D10.0 | 10 | 10 | 30 | 75 | 3 |
| AL-3E-D12.0 | 12 | 12 | 32 | 75 | 3 |
| AL-3E-D16.0 | 16 | 16 | 45 | 100 | 3 |
| AL-3E-D20.0 | 20 | 20 | 45 | 100 | 3 |
SQUARE/FLAT End Mills offered are solid carbide mill finish that is suitable for metal options like aluminum, non-ferrous, non-metallic metal. Featuring precision engineered flute design that provides for superior chip removal at high feed rates, these end mills also allows for achieving lower cutting forces as well as enhanced balance and finish support. These also help in providing enhanced functional control as well as in bringing reduction in chatter.
Features:
Welcome your inquiry.
