Active Member
|
[China]
Address: No.18, Yinhu Development Zone, Dongxihu District Wuhan China
Contact name:Nichole Deng
Wuhan Qiaoxin Refrigeration Equipment CO., LTD |
|
|
Industrial Heat Exchanger
Water Cooling Evaporator for Screw Chiller
Industrial Heat Exchanger Water Cooling Evaporator for Screw
Chiller is suitable for water cooled unit,
water source heat pump, air cooled pump and air cooled heat pump unit.
The product is applying for refrigerants of R22, R134a, R407C and
R410A etc.
The referigerating medium is for tap water, underground water,
river water and sea water or brine, water
and glycol solution, sulfate solution, etc.
For heat exchange tube, copper pipe, copper nickel alloy tube,
aluminum brass tube, stainless steel tube,
etc.
The shell raw material mainly are seamless steel tube, stainless
steel pipe.
1, Heat exchange tube: four main tube type.
(1) ∅ within 3/8 "thread copper coil, it is mainly used for" U
"type tube evaporator.
(2) ∅ within 1/2 "threaded straight copper tube, straight tube is
mainly used for dry-type evaporator.
(3) ∅ 1/2 "corrugated straight stainless steel tube, straight tube
is mainly used in food industry of dry
evaporator.
(4) ∅ 5/8 "inside outside screw wing efficient copper tube, it is
mainly used for air precooling industry dry
evaporator.
2, shell raw material:
There are two of the major materials:
(1) # 20 seamless steel tube, mainly used for all kinds of load -
more than 20 ℃ cold agent.
(2) 304/316 l stainless steel tube, it is mainly used for food and
low temperature (below 25 ℃, higher than
40 ℃) of the refrigerant, 316 l can also be used for cooling load
of the sulfate for industry.
3, interface:
The heat exchange tube uses copper pipe, nickel-copper alloy tubes, aluminum brass tube and stainless
steel tube as the material and the shell uses No.20 seamless steel tube and stainless steel tube.
STEAM TO WATER HEAT EXCHANGER
CAPACITY: 1000KW TO 4000KW
| Model | Capacity (KW) | Dimension (mm) | Weight (kg) | ||||||||
| D | T1 | T | A | C | E | F | H1 | H2 | |||
| QXSW60S10 | 1000 | 273 | 1600 | 2053 | 120 | 360 | 150 | 100 | 350 | 240 | 297 |
| QXSW70S12 | 1250 | 325 | 2032 | 2498 | 150 | 406 | 180 | 120 | 350 | 240 | 357 |
| QXSW80S12 | 1400 | 325 | 2032 | 2498 | 150 | 406 | 180 | 120 | 350 | 240 | 372 |
| QXSW90S12 | 1600 | 325 | 2032 | 2498 | 150 | 406 | 180 | 120 | 350 | 240 | 387 |
| QXSW100S12 | 1800 | 325 | 2032 | 2498 | 150 | 406 | 180 | 120 | 350 | 240 | 412 |
| QXSW120S14 | 2100 | 355 | 2032 | 2555 | 150 | 440 | 180 | 120 | 400 | 290 | 494 |
| QXSW140S14 | 2500 | 355 | 2500 | 3023 | 180 | 440 | 180 | 120 | 400 | 290 | 517 |
| QXSW180S16 | 3200 | 426 | 2500 | 2951 | 180 | 530 | 260 | 150 | 260 | 260 | 729 |
| QXSW220S16 | 4000 | 426 | 2500 | 2951 | 180 | 530 | 260 | 150 | 260 | 260 | 784 |
| Model | S1 | S2 | W | |||
| Specification | Connection type | Specification | Connection type | Specification | Connection type | |
| QXSW60S10 | DN100 | male flange | DN65 | male flange | DN80 | male flange |
| QXSW70S12 | DN100 | male flange | DN65 | male flange | DN80 | male flange |
| QXSW80S12 | DN125 | male flange | DN80 | male flange | DN100 | male flange |
| QXSW90S12 | DN125 | male flange | DN80 | male flange | DN100 | male flange |
| QXSW100S12 | DN125 | male flange | DN80 | male flange | DN100 | male flange |
| QXSW120S14 | DN125 | male flange | DN80 | male flange | DN100 | male flange |
| QXSW140S14 | DN125 | male flange | DN80 | male flange | DN100 | male flange |
| QXSW180S16 | DN150 | male flange | DN100 | male flange | DN125 | male flange |
| QXSW220S16 | DN150 | male flange | DN100 | male flange | DN125 | male flange |
CONDENSER SERIES SINGLE CIRCUIT
CAPACITY: 40RT TO 70RT
| Model | Refrig. ton (RT) | Refrig. ton (104kcal/h) | Dimension (mm) | Weight (kg) | Max. water flow | |||||||
| D | T1 | T | A | C | E | H1 | H2 | |||||
| QXC40S10A | 40 | 15.12 | 273 | 1600 | 2053 | 120 | 360 | 150 | 350 | 240 | 204 | 31 |
| QXC45S10A | 45 | 17.01 | 273 | 1600 | 2053 | 120 | 360 | 150 | 350 | 240 | 212 | 35 |
| QXC50S10A | 50 | 18.90 | 273 | 2032 | 2485 | 120 | 360 | 150 | 350 | 240 | 240 | 38.5 |
| QXC55S10A | 55 | 20.79 | 273 | 2032 | 2485 | 120 | 360 | 150 | 350 | 240 | 249 | 42.5 |
| QXC60S10A | 60 | 22.68 | 273 | 2032 | 2485 | 120 | 360 | 150 | 350 | 240 | 256 | 46 |
| QXC65S10A | 65 | 24.57 | 273 | 2032 | 2485 | 120 | 360 | 150 | 350 | 240 | 264 | 49.2 |
| QXC70S10A | 70 | 26.46 | 273 | 2032 | 2485 | 120 | 360 | 150 | 350 | 240 | 270 | 53.5 |
| Model | S (Vent) | P (fluoride inlet) Copper pipe diameter (inch) | L(fluoride outlet) Copper pipe diameter (inch) | W (standard port) | W (optional port) |
| FPT(inner pipe thread) | Male flange | Male flange | |||
| QXC40S10A | 3/8 | 1-5/8 | 1-1/8 | DN65 | DN65 |
| QXC45S10A | 3/8 | 1-5/8 | 1-1/8 | DN65 | DN65 |
| QXC50S10A | 3/8 | 1-5/8 | 1-1/8 | DN65 | DN80 |
| QXC55S10A | 3/8 | 1-5/8 | 1-1/8 | DN65 | DN80 |
| QXC60S10A | 3/8 | 1-5/8 | 1-3/8 | DN65 | DN80 |
| QXC65S10A | 3/8 | 1-5/8 | 1-3/8 | DN65 | DN80 |
| QXC70S10A | 3/8 | 2-1/8 | 1-3/8 | DN80 | DN80 |
CONDENSER SERIES SINGLE CIRCUIT
CAPACITY: 75RT TO 100RT
| Model | Refrig. ton (RT) | Refrig. ton (104kcal/h) | Dimension (mm) | Weight (kg) | Max. water flow | |||||||
| D | T1 | T | A | C | E | H1 | H2 | |||||
| QXC75S12A | 75 | 28.350 | 325 | 2032 | 2485 | 120 | 360 | 180 | 350 | 240 | 335 | 57.2 |
| QXC80S12A | 80 | 30.240 | 325 | 2032 | 2485 | 120 | 406 | 180 | 350 | 240 | 343 | 61 |
| QXC85S12A | 85 | 32.130 | 325 | 2032 | 2485 | 120 | 406 | 180 | 350 | 240 | 350 | 64.1 |
| QXC90S12A | 90 | 34.020 | 325 | 2032 | 2485 | 120 | 406 | 180 | 350 | 240 | 364 | 68 |
| QXC95S12A | 95 | 35.910 | 325 | 2032 | 2485 | 120 | 406 | 180 | 350 | 240 | 372 | 72.1 |
| QXC100S12A | 100 | 37.800 | 325 | 2500 | 2966 | 120 | 406 | 180 | 350 | 240 | 379 | 76 |
| Model | S (Vent) | P (fluoride inlet) Copper pipe diameter (inch) | L(fluoride outlet) Copper pipe diameter (inch) | W (standard port) | W (optional port) |
| FPT(inner pipe thread) | Male flange | Male flange | |||
| QXC75S12A | 3/8 | 2-1/8 | 1-3/8 | DN80 | DN100 |
| QXC80S12A | 3/8 | 2-1/8 | 1-3/8 | DN80 | DN100 |
| QXC85S12A | 3/8 | 2-5/8 | 1-3/8 | DN100 | DN100 |
| QXC90S12A | 3/8 | 2-5/8 | 1-3/8 | DN100 | DN100 |
| QXC95S12A | 3/8 | 2-5/8 | 1-3/8 | DN100 | DN100 |
| QXC100S12A | 3/8 | 3-1/8 | 1-5/8 | DN100 | DN100 |
COOPERATED CLENTS
