Yuantai (Zhangjiagang) Machinery Technology Co., Ltd |
Verified Suppliers
|
|
50NC Tube bender
Model | 50NC |
Taking the biggest bending radius 1.5D suitable for carbon steel tube material as example | ¢50×2.5t |
Max. effective distance of mandrel (a) | 2000mm |
Max. bending radius | 250mm |
Max. bending angle | 185° |
Oil pump | 5.5KW |
Bending drive system | gear and rack |
Control system | PLC |
Boost | Hydraulic |
Cooling system | Water cooling |
Protection system 1 | Two-way bent arm switch |
Protection system 2 | Emergency stop |
Max.curve no. of one tube | 16 |
Max oil pressure | 14Mpa |
Weight | ca. 1500kg |
L.W.H(cm) | 355×100×125 |
Function
1. NC-control, hydraulic drive, bending angle preset.
2. New-designed camshaft is applied, which can eliminate wear clearance of gear and rack.
3. Forked-tail designed sliding block. Self-lubricating sliding components (oilless bearing).
4. Chinese display, HMI, manual/semi-automatic operation, movable pedal switch (start / emergency stop), two-way bent arm switch.
5. Hydraulic components are from famous suppliers.
6. Powerful cooling system for effective temperature control.
7. Easy operation, stable running, high efficiency, safe for operation.
Applications:
Auto,motorbike,aircraft,bicycle,kids bike,fitness
equipment,furniture,outdoor equipment,air conditioner,food
machinery,nulcear tube such as reactor,evaporator and heat
exchanger
Features
1. The feeding shaft will perform automatic detection before
acting,so that the feeding shaft is avoided from bumping the
machine
2. When the curves are tested,analytical actions can be used,the
actions are modified by the careful observation of the interference
points ,so that the efficiency is improved.
3. After the data are compiled,the data is protected by a key,so
that the data are prevented from any modification.
4. The electric control system is equipped with a heat exchanger
for automatic heat dissipation;if necessary,a numerical control
type refrigerator can be additionally bought,so that the life span
of the electric control system is ensured.
5. An automatic oil charging system is installed to reduce friction
of the bending tube.It prolongs the lifetime of the core rod and
improves the quality of the bended tube.
6. All processing data are inputted by the touch screen
7. Based on the change of materials,each curve is set with a
compensation value,a speed and a demoulding gap.
8. The Mitsubishi ultra-large CPU can accommodate 400 groups of
files for compiling,if necessary,the additional transmission
software is bought and installed in the computer,and the documents
and files are stored in the hard disk,so that the number of
compiling groups is unlimitedly expanded.
9. Industrial-use computer type:the WINDOWS operating system is
internally installed,and used together with the Mitsubishi servo
system,besides the Mitsubishi servo driving,the convenient file
management owned by the WINDOWS operating system is also
provided;and the files can be storted in the hard disk or soft
disk,so that the compiling groupnumber is unlimitedly expanded.
10. Chinese/English language are switched to display on the touch
screen,and customers can also purchase the machine installed with
other languages