TTI Fiber Communication Tech. Co., Ltd. |
|
Single Mode Armored Fiber Optical Cable With LSZH High Strength
Tensile
1. Descreption of GJSFJV simplex Armored fiber optic cable
Indoor Armored Fiber Optic Cable is used in building wiring
applications. Installed in walls, between floors, in plenum air
handling ducts and under data center floors indoor application
usually use loose buffered and tight buffered fiber or tight
buffered fiber optic cable , inner jacket & strengths members
.inner jacket usually surrounded by a spirally wrapped interlock
armor .indoor armored fiber optic cables are less able to withstand
mechanical pressure and temperature than outdoor fiber optic cables
but they can retard fire effectively by using LSZH material in
jacket .Tight Buffered is flexible and easy to handle. Light-weight
aluminum interlock armor is standard. This design eliminates the
need for inner duct or conduit and the cost associated with the
installation of either. Ideal intra-building cable solution
2. Features:
Good mechanical and environmentai characteristics;
Soft, flexible, solid, easy to splice ,It’s especially applied to
optical long-distance, field, building wiring, trunking connectors;
Flame retardant characteristics and the meet the requirements of
relevant standards;
Meet various requirements market and clients.
3. Applications:
Used in all kinds of general optical
Use in pigtails and patch cords
Used in connectors in optical communication equipment rooms and
optical distribution frames
Used as optical apparatus connectors
4. Characteristics:
Item | G.652 | G.655 | 50/125um | 62.5/125um | ||||||||
Attenuation | @850nm | ≤3.0dB/km | ≤3.2dB/km | |||||||||
@1300nm | ≤1.0dB/km | ≤1.2dB/km | ||||||||||
@1310nm | ≤0.36dB/km | ≤0.40dB/km | ||||||||||
@1550nm | ≤0.22dB/km | ≤0.23dB/km | ||||||||||
Bandwidth (Class A) | @850nm | ≥500MHZ.km | ≥200MHZ.km | |||||||||
@1300nm | ≥1000MHZ.km | ≥600MHZ.km | ||||||||||
Numerical aperture | 0.200±0.015NA | 0.275±0.015NA | ||||||||||
Cable cut-off wavelength | ≤1260mm | ≤1450mm |
5. Cable Parameter:
Cable type | Cable Diameter mm | Stainless steel tube diameter | Tight-buffered fiber diameter mm |
2.0GJSJV | Φ2.0±0.1 | Φ0.9±0.05 | Φ0.5 |
3.0GJSJV | Φ3.0±0.1 | Φ1.41±0.05 | Φ0.9 |
Cable type | Cable Diameter (mm) | Cable weight | Tensile N | Bend radius (mm)* | Crush N/100mm | ||
Short time | Long time | dynamic | static | ||||
2.0GJSJV | Φ2.0±0.1 | 6.5 | 200 | 100 | 20 | 10 | 4500 |
3.0GJSJV | Φ3.0±0.1 | 10.5 | 200 | 100 | 30 | 15 | 4500 |
All the values in the table 2 , which are for reference only
Using fiber of G657 series , the bending radius will be less than
15mm
Product Picture: