|
[China]
Trade Verify
Address: NO.5 ZONE 5 LANXIANG ROAD, TIANQIAO DISTRICT JINAN CHINA
Contact name:Samantha
Shandong Heavy Industry Machinery Co.,Ltd. |
|
Verified Suppliers
|
|
|
The temperature of the generator set rises rapidly when the size of the diesel engine generator set shrinks, reaching the ignition point of diesel. When the diesel oil is ignited, the mixed gas burns violently, and the volume expands rapidly, pushing the piston down, which is called 'work'.
The cylinders perform work in a certain order, and the thrust acting on the piston becomes the power to drive the crankshaft through the connecting rod, thereby driving the crankshaft to rotate. Using the principle of 'electromagnetic induction', the generator will output the induced electromotive force, and the current will be generated through the closed load circuit. Only the most basic working principle of the generator set is described here. In order to obtain usable and stable power output, a series of diesel engine and generator control, protection devices and circuits are also required.
Machine data | |
Type | in-line, six-cylinder, four-valve, four-stroke |
Intake method | Supercharging, air-to-air cooling |
Bore X stroke | 130mmX161mm |
Displacement | 12.8L |
Compression ratio | 11.5:1 |
Firing sequence | 1-5-3-6-2-4 |
Cylinder distance | 162mm |
Combustion chamber type | ω type |
Engine dimensions (length X width X height) | 1360x898x1138mm |
Engine weight (including flywheel, excluding generator) | 1065kg |
Moment of inertia of flywheel | 2.9Kgm2 |
Intake and exhaust system | |
Rated point exhaust back pressure | 10±1kPa |
Exhaust temperature | 680°C |
Exhaust flow | 1450Kg/h |
Intake flow | 1450Kg/h |
Allowable maximum intake resistance (clean filter element) | 3.5KPa |
Allowable maximum intake resistance (dirty filter element) | 6.5KPa |
Intake resistance alarm value | 6.3KPa |
cooling system | |
Coolant main content | 50:50 (ethylene glycol: water) |
Coolant outlet temperature | 95°C |
The temperature difference between the inlet and outlet of the coolant is | 6±1℃ |
Radiator heat dissipation | 138KW |
Radiator flow rate | 440L/min |
Alarm temperature | 104℃ |
Air intake type | air-to-air cooling |
Allowable pressure drop of intercooler | 11-13KPa |
Intercooler heat dissipation | 57KW |
The allowable intake air temperature of the intercooler is | 195±5°C |
The maximum air intake of the intercooler is | 1450Kg/h |
lubrication system | |
Engine oil pressure@idle speed | 100±10kPa |
Engine oil pressure@rated point | 550±10KPa |
Maximum allowable oil temperature | ≤120℃ |
Oil pan capacity low | 30L |
Oil pan capacity high | 38L |
Total system capacity | 33.2-41.6L |
Allowable inclination angle of oil pan @forward | 30° |
Allowable inclination angle of oil pan @backward tilt | 30° |
Allowable inclination angle of oil pan @ fuel pump side elevation angle | 30° |
Allowable inclination angle of oil pan @ exhaust side elevation angle | 30° |
Fuel System | |
Oil pump system type | High pressure common rail |
Injection pressure of injector | 1600bar |
Fuel temperature | 38±5℃ |
The maximum allowable resistance of fuel pump inlet pipe (clean filter element) | 10KPa |
The maximum allowable resistance of fuel pump inlet pipe (dirty filter element) | 24.7KPa |
Electric start system | |
Standard starter voltage | 24V |
Minimum average starting speed without auxiliary cold start | 130r/min |
Minimum temperature without auxiliary cold start | -15°C |
1. OEM Manufacturing welcome: Product, Package.
2. We will reply you for your inquiry in 24 hours.
3. After sending, we will track the products for you once every two
days, until you get the products. When you got the
goods, test them, and give me a feedback. If you have any questions
about the problem, contact with us, we will offer
the solve way for you.
1. Either original or OEM parts, we have lots of directly suppliers to choose. You could get HOWO/SHACMAN/HONGYAN/FAW spare parts bellow market price.
2. “One-shop purchasing service”: Quotation--Preparation--Delivery.
With 10+year experience, we proficient in parts business management
process.
3. After getting your order, we will take pictures of every parts
for you. Even if you have 500 items.
4. Has Sinotruk parts system, we can get the exact information
according the chassis no and assembly nameplate , accurate rate
reaches 95%.
5. Our boss is very familiar with the working principle and
maintenance of trucks.
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown
cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your
authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We will show you
the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your
advance payment. The specific delivery time depends
on the items and the quantity of your order.
