1200mAh CCD 2D Image Wearable Bluetooth Barcode Scanner

• Plug and Play: No driver or app needed. Bluetooth  Wireless and usb type c cable wired  -- simple and easy installation right out the box, just insert the wireless dongle or the data cable into a computer, or connect cell phone via bluetooth ,then start scanning. No training necessary.

• Two working mode: Instant upload mode and storage mode. Scan and store barcodes and then update the data to your device. When using the scanner far away the wireless signal range, activate the storage mode, all scanned barcodes will be stored directly into the built-in memory of the scanner.

• Support 1D Printed Barcodes: Code 39, UPC-A/UPC-E (Include Complement Code), EAN13, EAN8, Code 93, Code 128, Codabar. etc

Question and answer about Wired Ring Barcode Scanner N8 1D Portable Wearable Mini Bluetooth Ccd Barcode Scanner

1.Scanner is connected , but the barcode can’t be sent to my computer ?

Possible the scanner was set to storage mode , please scan the code to change to Instant Upload Mode .

2.Some barcodes can not be read why ?

Damaged barcodes and blurry barcodes can’t be read , you have to input manually .If the barcode is clear and complete , scan other barcode in the same type to find out if the certain barcode type is off by default.Some barcodes are off by default for they are not commonly used , please contact us of you don’t know what type of barcode you are referring to .

3.Why the barcode content is not correct ?

If garbled characters shows. Please make sure the host keyboard language is the same as the scanner language .If characters missing happens , please slow down the transmission speed .

4.The barcode content send to mu computer is wrong.

Please set the inout language of your computer to English temporarily and set the scanner keyboard language to English .