Home Companies Xi'an Yunyi Instrument Co., Ltd

Two Way Position Normally Closed Water Solenoid Valve Press Solenoid Switch

Xi'an Yunyi Instrument Co., Ltd

Contact Us

[China] country

Trade Verify

Address: Rm. 1203-1, Bldg. B, Xian Xinsilu International E-Commerce Industrial Park, No. 9, Gangwu Road, Int'l Port District

Contact name:Alice

Inquir Now

Xi'an Yunyi Instrument Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Two Way Position Normally Closed Water Solenoid Valve Press Solenoid Switch

Country/Region china
Categories Valves
InquireNow

Product Details

Two-way normally closed two-position press Solenoid switch / Water Solenoid Valve

 

Description
Solenoid valve is a two-way normally closed two-position two-way solenoid valve. The valve uses the electromagnetic force generated by the coil to drive the movement of the valve core, thereby blocking or circulating the medium in the pipeline, and achieving the purpose of timing and automatic discharge of compressed air condensate. Mainly used in compressed air system components such as filters, separators, dryers, air storage tanks, drip feet, etc. The discharge time and interval can be adjusted according to different needs

 

Image

 

 

Specification

medium: water
Medium temperature: -20~80°C
Work pressure: 0~16bar
Aperture (mm): 3.0
Intervals: 0.5~45min
Discharge time: 0.5~10sec
Joint form: G1/2” (can be changed to 3/8” or 1/4”)

 

Application

1. Before installation, remove dirt, copper filings, rust, etc. from the compressed air system. It is recommended to install the electronic drain valve after the full pressure drop system is emptied for 1 minute;
2. The solenoid valve should be installed vertically on the horizontal pipeline, the flow direction of the medium must be consistent with the arrow direction pointed by the solenoid valve, and the water outlet should not use a hose that is not resistant to airflow;
3. The input voltage of the coil must be consistent with the voltage indicated on the coil, and it is never allowed to remove the solenoid from the valve when it is energized to prevent the coil from being burned;
4. When using direct current, the positive pole must be connected to connector "1".

 

 

Contact US
Xi'an Yunyi Instrument Co., Ltd
E-mail: judy@369yb.com
Phone/WhatsApp:0086 17602903009
Add.: Room B11003, 10th Floor, Sihai Center, No. 424, Taihua
North Road, Weiyang District, Xi'an 710021, Shaanxi,China

Hot Products

Modbus RS485 4-20ma 0-10V temperature and humidity sensor RHT Humidity Sensor Description of Modbus ...
Description of Ceramic Absolute Pressure Sensor Pressure Transmitter 0-5V4-20mA This pressure sensor ...
Description of Ceramic Absolute Pressure Sensor Pressure Transmitter 0-5V4-20mA This pressure sensor ...
Description of Ceramic Absolute Pressure Sensor Pressure Transmitter 0-5V4-20mA This pressure sensor ...
Description of Ceramic Absolute Pressure Sensor Pressure Transmitter 0-5V4-20mA This pressure sensor ...
Destription of Micro Differential Pressure Gauge Te5000 Mini Low Air Differential Pressure Gauge Hot ...