|
[China]
Trade Verify
Address: Rm. 1203-1, Bldg. B, Xian Xinsilu International E-Commerce Industrial Park, No. 9, Gangwu Road, Int'l Port District
Contact name:Alice
Xi'an Yunyi Instrument Co., Ltd |
|
Verified Suppliers
|
|
|
Description Dead Weight Piston Calibrate hand pump pressure gauge tester
Dead weight tester is a calibration standard which uses a piston cylinder on which a load is placed to make an
equilibrium with an applied pressure underneath the piston.Deadweight testers are so called primary standards which means that the pressure measured by a deadweighttester is defined through other quantities; Length, mass and time.
Typically deadweight testers are used in calibration laboratories to calibrate pressure transfer standards like
electronic pressure measuring devices.
Detailed Images Dead Weight Piston Calibrate hand pump pressure gauge tester
Features Dead Weight Piston Calibrate hand pump pressure gauge tester
YS-6 Deadweight Tester. Pressure Range 5.8 - 87psi. Accuracy: 0.015% or 0.020% of reading.
YS-60 Deadweight Tester. Pressure Range 14.5 - 870 psi. Accuracy: 0.015% or 0.020% of reading.
YS600 Deadweight Tester. Pressure Range 145 - 8700 psi. Accuracy: 0.015% or 0.020% of reading
Specification
| Model | YS-6 | YS-60 | YS-250 | YS-600 | |||||
| Measure Range | bar | 0.4-6 | 1-60 | 5-250 | 10-600 | ||||
| Accuracy | % | 0.02 or 0.05 | |||||||
| Nominal Area of Piston | cm2 | 1 | 0.5 | 0.2 | 0.1 | ||||
| Carrier and Piston | Nominal Mass | kg | 0.4 | 0.5 | 1 | 1 | |||
| Produced Pressure | bar | 0.4 | 1 | 5 | 10 | ||||
| Supplied Weights | Nominal Mass | kg | 0.10.5 | 0.52.5 | 15 | 15 | |||
| Produced Pressure | bar | 0.10.5 | 15 | 525 | 1050 | ||||
| Quantity Block | pcs | 610 | 411 | 49 | 411 | ||||
| Pressure Connection | M 20×1.5 | ||||||||
| Working Medium | Transformer Oil (viscosity 9~12 centistokes at 20i), or Medical Castor Oil (aciditymg KOH/g) | ||||||||
| Dimensions | mm | 630×382×593 | |||||||
| Weight | kg | 20+5.6 | 26+29.5 | 26+49 | 26+59 | ||||
Applications
Typically deadweight testers are used in calibration laboratories to calibrate pressure transfer standards like
electronic pressure measuring devices.
S-600 Dead weight tester DWT equipment
