|
[China]
Trade Verify
Address: Rm. 1203-1, Bldg. B, Xian Xinsilu International E-Commerce Industrial Park, No. 9, Gangwu Road, Int'l Port District
Contact name:Alice
Xi'an Yunyi Instrument Co., Ltd |
|
Verified Suppliers
|
|
|
density measuring instrument digital tuning fork density meter sensor
Description
Tuning fork density meter is a high-precision, high-applicability vibration principle density meter produced by introducing the most advanced frequency tracking technology from abroad. The product design uses plug-in installation and is widely used in pipelines, open tank containers and closed tank containers Medium density detection. The tuning fork density meter sensor is composed of two piezoelectric crystals. One piezoelectric crystal generates vibration and the other piezoelectric crystal detects vibration. The tuning fork sensor has a built-in temperature sensor to compensate the temperature of the piezoelectric crystal.
The split line of split tuning fork density meter is up to 2 meters in length. In order to reduce the interference of the tuning fork sensor line, a single wire jacket is used to protect the sleeve. The sensor line must be protected from interference and damage at the scene. It is relatively weak, and it is not recommended to use it in the place with electromagnetic interference
Detailed Image
Specification
| Measuring range: 0 ~ 3 g / cm³ optional Output: 4-20 mA signal (4-wire system) Accuracy: 0.3% (real-time range) or 0.001 g / cm³ whichever is greater. Resolution: 0.0001 g / cm³ Installation: DN50 DN80 DN100 and threaded installation (threaded installation with mounting base) Application range: -30 ~ 120 degrees Maximum working pressure: 20MPa Protection level: IP65 Fork body material: stainless steel 316, Hastelloy C22, manganese alloy 400 Fork body coating: Teflon coating (perfect hydrophobic and non-stick impurities in liquid) |
Features
1.The current circuit is independent of fork vibration circuit,
there is isolating anti-interference inner, reducing the influence
to instrument from disturb.
2.There is set density three point quick calibration, range adjust,
current calibration etc function, to meet on-site working demands.
3.Using high precision measuring density, is mainly used in power
plant.
4.Can not be affected by temperature, pressure and flow rate , the
factor affecting measuring error Is less
Application
1.Measurement of the density (concentration) of ore pulp in the
process of ore dressing density (concentration) during coal feeding
process;
2.Measurement of syrup density (concentration)
3.Measurement of starch emulsion density (concentration) (dry
matter mass)
4.Desulfurization project lime slurry density (concentration)
measurement, alarm
5.Denitration project ammonia density (concentration) measurement
6.Pharmaceutical industry concentrated solution density
(concentration) measurement
7.Alcohol and water surface density (concentration) measurement
8.Various types of pipeline or tank density (concentration)
measurement
Contact US
Xi'an Yunyi Instrument Co., Ltd
E-mail: judy@369yb.com
Phone/WhatsApp:0086 17602903009
Add.: Room B11003, 10th Floor, Sihai Center, No. 424, Taihua North
Road, Weiyang District, Xi'an 710021, Shaanxi,China
