Home Companies Xi'an Yunyi Instrument Co., Ltd

Remote Insertion Electromagnetic Flow Meter Split Transmitter

Xi'an Yunyi Instrument Co., Ltd

Contact Us

[China] country

Trade Verify

Address: Rm. 1203-1, Bldg. B, Xian Xinsilu International E-Commerce Industrial Park, No. 9, Gangwu Road, Int'l Port District

Contact name:Alice

Inquir Now

Xi'an Yunyi Instrument Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Remote Insertion Electromagnetic Flow Meter Split Transmitter

Country/Region china
Categories Flow Measuring Instruments
InquireNow

Product Details

Remote Insertion Electromagnetic Flow Meter Split Transmitter

 

 

Description Remote Insertion Electromagnetic Flow Meter Split Transmitter

Inserted EMF is widely applied in department like industry, agriculture, water conservation, environmental protection, water supply, etc. to measure and control the flow of various kinds of conducting liquid.

 

 

Parameter Remote Insertion Electromagnetic Flow Meter Split Transmitter

  • Applicable DN size: 300~3000mm
  • Operating pressure: ≤1.6MPa
  • Operating temperature: ≤70℃
  • The range of upper limit of flowrate: 1~10m/s UNCAL
  • Measuring accuracy: ±2.5%
  • Conductivity of measured medium: ≥50μs/cm
  • Electrode materials: 304, 304L, 316, 316L, hastelloy, Ti, etc.
  • The max. distance between sensor and converter: ≤50m
  • Cable: RVVP dual-core shielded cable or STT3200 triple shielded two-pair cable
  • The functions of converter please refer to the user manual of electromagnetic flowmeter provide by us.

Select the lining material

Should be based on the measured medium temperature corrosive wear and to select the lining material

Lining materialcorrosion resistanceWorking temperatureApplication
NeGeneral resistance to low concentrations of acid salt corrosion-20~70℃lower industrial water effluent pH and salt concentration
POHas an excellent wear resistance, abrasion resistance slurry dedicated to strong, not decay-10~60℃Liquids containing solid particles (slurry pulp, etc.)
FEP

1 corrosion resistant and quite PTFE

2 high mechanical strength, good wear resistance

3 table smooth, easy adhesion precipitate

4 have strong abrasive media fluid good resistance to outside negative, anti-vacuum effect

-40~180℃except mortar. Like with PTFE can be used for drinks and other health requirements of the media
PTFElmost all of the corrosion resistant chemical media, poor wear resistance-40~180℃Not be used for pipes and wear strong negative fluid

 

Selective Electrode Materials

Should be based on the measured fluid corrosive to select material of the electrodes, check the manual for special fluids should be corrosion test

 

 

MaterialCodecorrosion resistance
316Lstainless steelV1 applies to a neutral solution of industrial, domestic water, raw water wells, urban sewage
2 weak corrosive acids, bases, salts medium such as carbonic acid, acetic acid, etc.
Hastelloy CHC

1 applies to anti-oxidizing acids, such as a mixture of nitric acid, mixed acid, chromic acid and sulfuric acid

2 oxidation resistance salt or other corrosive environments, such as the oxidant Fe, Cu
3 Sea water, alkali solution, the oxide solution has excellent corrosion resistance

4 NA: hydrochloric acid

Hastelloy BHB
1 for the non-oxidizing acids, bases, salts such as sulfuric acid, phosphoric acid, hydrofluoric acid has good corrosion
2 NA: nitrate

 

TitaniumTiseawater resistant, various chlorides suddenly hypochlorite and a variety of corrosion hydroxide
TaTaexcept hydrofluoric acid, almost all corrosive chemical media capability. But expensive
PlatinumPtsalt solution applicable to all of the acid (fuming sulfuric acid and nitric acid)
TungstenWhas excellent wear resistance, dedicated to the mud, pulp and other abrasive media

 

Features Remote Insertion Electromagnetic Flow Meter Split Transmitter

  • Measuring range
    Measurement unaffected by changes in liquid density, viscosity, temperature, pressure and conductivity
    Choose materials carefully
    Carefully select the main body 304 stainless steel, stable and reliable for long-term use
    Acid-Alkali Slurry
    Used to measure various acids, alkalis, salt solutions, pulp, pulp and other media

 

Hot Products

FCA: Q:How long will you reply me? A:We will contact you as soon as possible but within 12 hours Q: ...
Description Digital Pressure Gauge YK-100 The YK-100 digital pressure gauge is a state-of-the-art ...
Description Digital Pressure Gauge YK-100 The YK-100 digital pressure gauge is an advanced ...
Description High Precision Oil Fuel Digital Calibration Pressure Gauge YK100B RS485 The YK100B ...
Smart Water Precision Appliance 0 600 Bar Pressure Gauge Digital Description The YK-80 Intelligent ...
Smart Water Precision Appliance 0 600 Bar Pressure Gauge Digital Description Smart Water Precision ...