|
[China]
Trade Verify
Address: Zhangzhu Town, Yixing City, Jiangsu province, China
Contact name:Marble Wu
Galaxy power industry limited |
|
Verified Suppliers
|
|
|
5.4Ton Overhead Line Construction Tools Wire Rope Winch
The body structure is novel:
This machine adopts high-strength aluminum alloy body, which is beautiful in appearance, compact in body and light in weight. It adopts two-stage gear transmission, and the high-speed stage is helical gear transmission, so the transmission is stable.
High strength parts:
The main parts of the machine are made of high-grade alloy steel material and processed by many special heat treatment processes. It has the characteristics of high strength and good wear resistance. The upper and lower hooks are made of high strength alloy steel and have high toughness after strengthening heat treatment. Even if the body is damaged due to overloading, the hooks will only produce plastic deformation without brittle fracture.
Parameters
| Model | GXSM-618 0.8 | GXSM-618 1.0 | GXSM-618 1.6 | GXSM-618 3.2 | GXSM-618 5.4 | |
| Rated load lifting capacity | ton | 0.8 | 1 | 1.6 | 3.2 | 5.4 |
| Stroke when the rated | mm | ≥52 | ≥52 | ≥55 | ≥28 | ≥30 |
| Forward handle effective length | mm | 825 | 825 | 1200 | 1200 | 1200 |
| Transmission series | 1 | 1 | 1 | 2 | 2 | |
| Wire rope diameter | mm | 8 | 8 | 11 | 16 | 20 |
| Wire rope standard length | m | 10, 20 | 10, 20 | 10, 20 | 10 | 10 |
| Net weight | kg | 6 | 6 | 12 | 23 | 45 |
The wire rope handle hoist is suitable for operation in the narrow area where the local space is limited.For field operations, aerial work, lifting operations in the deep well operation of the GXSM-618 5.4 wire rope hand hoist and the inorganic electric energy supply site will show special advantages.
Working principle:
The wire rope pulling hoist is obtained by the human lever wrench, and the linear traction matched with the load is obtained by the principle of the lever, and a caliper body acting on the movement of the movement is alternately operated with a load.
How to use:
Put the forward (reverse) handle to the machine first, then push the handle to the front of the machine, and the tip can be snapped into the upper step of the housing.
At this time, the upper and lower clamps of the front and rear calipers are OK.
The opening can be worn (pumped), and then the hand can be pushed forward and downward to push the release handle, so that the clamp clamping wire rope (or reset) can be put into operation.
