Clear Electronic Weighing Scale 3mm Rectangle Tempered Glass

Clear tempered electronic body weighing scale glass household use

Weighing scale glass is made of tempered Glass which heat glass up to 700 degrees and then rapidly cool down.

Tempered glass is a type of glass with even compressive stress on the surface which is made by heating float glass to nearly softening point and then cooling it down rapidly by air. During the instant cooling process, the exterior of glass is solidified due to rapid cooling while the interior of the glass is cooled down relatively slowly. The process will bring the weighing scale glass surface compressive stress and the interior tensile stress which can improve the mechanical strength of glass by germination and result in good thermal stability.

Please Note :

The specification of weighing scale glass should be confirmed before put the sheet glass into the toughening furnace, the

tempered glass can't be cut anymore after out of the toughening furnace, otherwise it will be broken.

weighing scale glass features:

1. Tempered glass is a kind of safe glass and the fragment of which does no harm to people.
2. Special logo and pattern can be printed on weighing scale glass.
3. Black or white background can silk screen printed with window to show the data.

Packaging Details

Paper interred between the weighing scale glass, packed in strong wooden crates and in safe vessel.

OEM Service :

OEM glass is available here, just tell us the details of the specification and other special

Manufacturing technique and you can get the most satisfied weighing scale glass from us.

* How to order weighing scale glass?

1. Contact our sales with detailed requirements/drawing/quantity, or just an idea or a sketch.
2. We check internally to see if it's producible, then provide suggestions and make samples for your approval.
3. Email us your official order, and send deposit.
4. We put the order into mass production schedule, and produce it as per the approved samples.
5. Process balance payment and advise us your opinion on safe delivery.
6. After sales service.

Quality Inspection Item

1, Appearance, In the daytime (or in the case of similar brightness), observe weighing scale glass vertically for 5 seconds with naked eyes or with the aid of glasses from a distance of 50cm or a distance of one arm length. No dirt or scratch, edge and corner, printing effect.

2, Printing appearance: the weighing scale glass printing area (ink covered area) of the control panel is judged under the condition that the back has opaque cover (black background), and under the black background, it is acceptable that the front is invisible.

3, Evenness: bow shape ≤ 0.5%; there is one place (one peak and one trough) allowed for every 610mm of waveform;

4, Granularity test: two pieces of weighing scale glass are selected for each batch of glass to be tested, and the place where the center of the long side of the glass plate is 13mm higher than the bottom edge is taken as the breaking point (see figure). After the glass is broken, the two areas with the largest granularity are selected in a 50mm*50mm box for counting. The number of crack-free particles completely contained in the 50mm*50mm box must be ≥50, and the largest particle size must be ≤ 15 mm * 8 mm.

5, Impact test: drop a steel ball with a diameter of 51mm and a weight of 535g from the glass surface 648mm, and impact the center of the glass plate once to ensure that the glass does not break.