Active Member
|
[China]
Address: Daqiao Developing Zone Haiyan,Zhejiang Province,China
Contact name:Richard
Torich International Limited |
|
|
ASTM A213 304 316 Fin Tube Connector Fin Tube Air Cooler Finned
Pipe Heat Exchanger Finned Stainless Steel Tubing
Finned tubes are used in applications involving the transfer of
heat from a hot fluid to a colder fluid through a tube wall.
The rate at which such heat transfer can occur depends on three
factors: (1) the temperature difference between the
two fluids; (2) the heat transfer coefficient between each of the
fluids and the tube wall; and (3) the surface area to which
each fluid is exposed. In the case of a bare (unfinned) tubes,
where the outside surface area is not significantly greater
than the inside surface area, the fluid with the lowest heat
transfer coefficient will dictate the overall heat transfer rate.
When the heat transfer coefficient of the fluid inside the tube is
several times larger than that of fluid outside the tube
(for example steam inside and oil outside), the overall heat
transfer rate can be greatly improved by increasing the
outside surface of the tube. In mathematical terms, the product of
heat transfer coefficient for the outside fluid multiplied
by the outside surface area is made to more closely match the
product of the inside fluid heat transfer coefficient multiplied
by the inside surface area.
Base tube material: SA213 304 SMLS 31.8mmOD*2.9mmTHK*7260mmLG
Fin Material: CS; FPM67fins X 1.5 mm THK x 75 mm W x 160 mm H
Manufacturing Process of Air Cooler Finned Pipe :
It adopts high frequency welding spiral technology, the national
patent technology with high frequency power supplies as
the heat source to heat the steel strip, steel pipe at the same
time,be welded together
Material: Steel, Carbon Steel, etc.
Bare tube Connector Fin Tube OD: 25-63mm Fin Pitch: 8-30mm Fin Height: <200mm Fin Thick:
1.5-3.5mm
| Name | Base tube (OD) mm | Fin Pitch (mm) | length (m) | |||
| Min | Max | Min | Max | Min | Max | |
| Extruded aluminum fin tube | 12.7 | 51 | 2.1 | 10 | 0.5 | 20 |
| L/LL/KL aluminum fin tube | 19 | 51 | 2.1 | 3.2 | 0.5 | 15 |
| Embedded aluminum fin tube | 19 | 42 | 2.3 | 3.2 | 0.5 | 15 |
| Low fin tube | 12.7 | 32 | 0.8 | 2 | 0.5 | 20 |
| Spiral fin tube | 12.7 | 70 | 0.5 | 20 | ||
| ERW HF spiral fin tube | 16 | 219 | 3 | 25 | 0.5 | 28 |
| ERW HF spiral serrated fin tube | 16 | 219 | 3 | 25 | 0.5 | 28 |
| Serrated width(mm) 10 min~26 max | Serrated depth(mm) 4 min~16 max | |||||
| ERW studded tube | 89 | 200 | 16 | 50 | 2 | 15 |
| DC ERW H/HH fin tube | 25 | 51 | 9 | 25 | 1 | 15 |
| H/HH fins | Length(mm) 60 min-150 max | Thickness(mm) 1.5 min~4 max | Width(mm) 30 min~50 max | |||
Applications
Typical examples of applications where finned tubes are used
include the following:
