EN10305-1Gas Cylinders Seamless cold drawn rolling steel tubes/ Cylinder tubing

Standard: EN10305-1 Seamless cold drawn/rolling steel tubes                                                    

Steel tubes for precision applications.  Technical delivery conditions.   

Applications: for Auto industry/for machinery use/Oil Cylinder Tube/Motorcyle shock absorber                            Auto shock absorber innder cylinder/Telescopic Cylinders                                                    

Size range: O.D.:6-350mm     W.T.:1-35mm      L:max12000mm                                                    

Steel Grade and Chemical Compositions:  

a  Rm: tensile strength;  ReH: upper yield strength; A: elongation after fracture                                                   b  1Mpa=1N/mm2                                                    

c   Depending on the degree of cold work in the finishing pass the yield strength may nearly be as high as the tensile strength.                                                    
     For calculation purposes the following relations are recommended:                                                    
     for delivery condition +C: ReH ≥0.8 Rm                                                    
     for delivery condition +LC: ReH ≥0.7 Rm                                                    
d   For calclulation purposes the following relation is recommended:ReH≥0.5Rm                                                
e   For tubes with outside diameter ≤30mm and wall thickness ≤3mm the ReH minimim values are 10Mpa lower than the values given in this Table                                                    
f    For tubes with outside diameter＞160mm: ReH≥420Mpa    

Note: Special steel grade is also available, according to customer request.