|
[China]
Trade Verify
Address: ROOM C-911,9/F.,ZHICHENG INTERNATIONAL CENTRE,
Contact name:james
Jining Qinfeng Machinery Hardwae Co., Ltd. |
|
Verified Suppliers
|
|
|
High Precision BT40-SEMC22-50 Combi Shell End Mill Arbor Tool Holder type of milling cutter
Combi shell end mill arbors FMB face mill arbors BT30 BT40 BT50 tool holder,Taper ground to AT3 or better accuracy standard for maximum contact with spindle., suitable for the use of the axial or radial drive groove of the milling cutter such as: vertical disc cutter, sets of type of milling cutter, face milling cutter, milling cutter, three face milling cutter .BT Combi Shell End Mill Arbor Mechanical spindle and cutting tools and other accessories.High Precision BT shank Tool Holder ,balanced G6.3 or G2.5 For choose.
Product Description
1.BT Combi Shell End Mill Arbor Model: BT30/40/50-SEMC (specific
model reference to the bottom of the table)
2.BT Combi Shell End Mill Arbor Material: high quality Carburizing
Steel Blackening synthesis, and fine grinding
3.BT Combi Shell End Mill Arbor Taper shank: tolerance level
<AT3
4.BT Combi Shell End Mill Arbor Hardness: 56-58 HRC
5.Maximum beat: <0.005mm
6.Surface roughness: Ra<0.005mm
7.The handle body can also specify the cooling method of AD+B
8.The handle can be specified dynamic balance G6.3 or G2.5
9.BT Combi Shell End Mill Arbor AppliCATEEion scope: suitable for
the use of the axial or radial drive groove of the milling cutter
such as: vertical disc cutter, sets of type of milling cutter, face
milling cutter, milling cutter, three face milling cutter
| Model | d | D | L | A | |
| BT30-SEMC16-45 | 16 | 32 | 17 | 45 | |
| BT30-SEMC22-47 | 22 | 40 | 19 | 47 | |
| BT30-SEMC27-49 | 27 | 48 | 21 | 49 | |
| BT40-SEMC16-45 | 16 | 32 | 17 | 55 | |
| BT40-SEMC16-100 | 16 | 32 | 17 | 100 | |
| BT40-SEMC22-55 | 22 | 40 | 19 | 55 | |
| BT40-SEMC22-100 | 22 | 40 | 19 | 100 | |
| BT40-SEMC27-55 | 27 | 48 | 21 | 55 | |
| BT40-SEMC27-100 | 27 | 48 | 21 | 100 | |
| BT40-SEMC32-60 | 32 | 58 | 24 | 60 | |
| BT40-SEMC32-100 | 32 | 58 | 24 | 100 | |
| BT40-SEMC40-60 | 40 | 70 | 27 | 60 | |
| BT40-SEMC40-100 | 40 | 70 | 27 | 100 | |
| BT50-SEMC16-70 | 16 | 32 | 17 | 70 | |
| BT50-SEMC22-70 | 22 | 40 | 19 | 70 | |
| BT50-SEMC27-70 | 27 | 48 | 21 | 70 | |
| BT50-SEMC32-70 | 32 | 58 | 24 | 70 | |
| BT50-SEMC40-70 | 40 | 70 | 27 | 70 | |
| suitable for the use of the axial or radial drive groove of the milling cutter such as: vertical disc cutter, sets of type of milling cutter, face milling cutter, milling cutter, three face milling cutter | |||||
BT combine shell end mill arbor Product Description
1.Standard face mill arbors for clamping indexable face mills. The
range is available in most tapers in lengths up to 160mm (or 200mm
on selected tapers).
2.Taper ground to AT3 or better accuracy standard for maximum
contact with spindle.
3.All Face mill arbors keep the tolerance ≤0.01mm.
4.The pre-balance can reach G6.3 8,000 rpm,dynamic balance by
Haimer Machine, G2.5 is available.
5.Internal hole tolerance : H5(DIN-1835-B standard).
BT40 combine shell end mill arbor
• Useful for efficient holding of end mills, slot drills or similar
tooling in light and heavy duty milling machines and small lathes.
• Precisely ground externally and internally to very close
tolerances with concentricity within + .10 Microns.
• Eliminates the need of a collet chuck.
• The machining area is easily visible while doing intriCATEEe
components.
• Manufactured from case Hardened Steel.
