|
[China]
Trade Verify
Address: ROOM C-911,9/F.,ZHICHENG INTERNATIONAL CENTRE,
Contact name:james
Jining Qinfeng Machinery Hardwae Co., Ltd. |
|
Verified Suppliers
|
|
|
SK30/40/50 MTB Mill Arbors Tool Holder, HRC56-58, 0.8mm±0.2mm Carbon Depth
MTA Morse Taper Adapter SK30/40/50 DIN 69871 Tool Holder , Sk Tool Holder AppliCATEEion range: DIN69871 MORSE TAPER ADAPTER with DRAWBAR is for holding tools with morse tapers and tang according to DIN 228-1 form B. Tool holder suitable for clamping type DIN228-1A with flat tail Morse tool holder. high speed and high precision machining Mechanical spindle and cutting tools and other accessories.High Precision SK shank Tool Holder ,balanced G6.3 or G2.5 For choos
| Model No. | MT. NO. | L | D | KG |
| SK40-MTB1-50 | 1 | 50 | 25 | 1.3 |
| SK40-MTB2-50 | 2 | 50 | 32 | 1.5 |
| SK40-MTB3-65 | 3 | 65 | 40 | 1.8 |
| SK40-MTB4-95 | 4 | 95 | 50 | 2.4 |
| SK50-MTB1-60 | 1 | 60 | 25 | 4.1 |
| SK50-MTB2-60 | 2 | 60 | 32 | 4.4 |
| SK50-MTB3-65 | 3 | 65 | 40 | 4.5 |
| SK50-MTB4-85 | 4 | 85 | 50 | 4.9 |
| SK50-MTB5-120 | 5 | 120 | 65 | 5.2 |
| Model | MT NO | L | D | Weight(KGS) |
| SK30-MTA1-50 | 1 | 50 | 25 | 0.7 |
| SK30-MTA2-50 | 2 | 50 | 32 | 0.8 |
| SK30-MTA3-75 | 3 | 50 | 40 | 0.9 |
|
|
|
|
|
| SK40-MTA1-50 | 1 | 50 | 25 | 1.3 |
| SK40-MTA2-50 | 2 | 50 | 32 | 1.5 |
| SK40-MTA3-65 | 3 | 65 | 40 | 1.8 |
| SK40-MTA4-95 | 4 | 95 | 50 | 2.4 |
| SK40-MTA5-125 | 5 | 125 | 63 | 3.8 |
|
|
|
|
|
| SK50-MTA1-45 | 1 | 45 | 25 | 4.1 |
| SK50-MTA2-60 | 2 | 60 | 32 | 4.4 |
| SK50-MTA3-65 | 3 | 65 | 40 | 4.5 |
| SK50-MTA4-70 | 4 | 70 | 50 | 4.9 |
| SK50-MTA5-105 | 5 | 105 | 65 | 5.2 |
MTA Morse Taper Adapter is a tool used in machining and
metalworking to connect two different types of tooling systems. The
Morse Taper system is a common method of securing cutting tools to
a machine spindle, while the MTA adapter allows for the attachment
of tools with a different type of taper.
The MTA adapter typically has a Morse Taper on one end, which can
be inserted into the machine spindle, and a different type of taper
on the other end, such as a R8 or a straight shank. This allows for
the use of a wider range of tooling options on a machine that may
only have a Morse Taper spindle.
The MTA Morse Taper Adapter is often used in milling machines,
lathes, and drill presses, where different types of tooling may be
required for different operations. By using an adapter, machinists
can easily switch between different tooling options without needing
to change the entire spindle or machine setup.
Overall, the MTA Morse Taper Adapter is a versatile tool that helps
expand the capabilities of a machine by allowing for the use of
different types of tooling systems.
