Yiwu XinMeiWuYu Import & Export Co.Ltd |
|
Description
#1100606 Silver Bizarre Rotary Machines
The Bizarre has infinitely adjustable softness (give), to be controlled by the control screw on the top of the machine; it can be controlled by your fingers or by a Hex (Allen) key.
1. It is adjustable softness |stroke, controlled by a screw on the
top of the machine.
For harder works (lining or color packing), turn the control screw
clockwise. For softer works (shading), turn the control screw
counterclockwise.
This machine is capable of hitting very softly compared to the best
conventional coil shading machines.
The control screw for the softness|hardness on the top side
and inside of the machine, and is therefore protected in case the
machine hits the floor.
2. Each Bizarre machine comes with a wrench adjuster that customizes the control
screw for softness|hardness. Soft or hard works all with the same
machine! And only need 5 seconds to turn it from a liner to a
shader without the need of touching the power supply.
3. The needle retainer gets a perfect stabilized needle, thus it is
no need for the rubber bands.
4. Improved tube vice locking system for the grips.
5. Easy to plug/unplug the motor-engine from one skyscraper into or out of another one with different needle configurations.
Technical Details
1.The Bizarre can be set up to hit at short, medium, or long strokes by simply
changing the interchangeable excenters on the motor- engine. It is
capable of hitting at any stroke length from 3.2 mm up to 4.4 mm to suit your needs, for maximum efficiency and for the shortest
healing times. It has a new concept, a new round external piston
causes minimal friction on the drive system, the motor and the
engine is running more freely and cooler.
2. The Bizarre is Ergonomic design and well balanced, together with the
motor-engine, weighs only 110 grams (3.8 oz).
3. The Bizarre is perfectly CNC-machined from a solid block of aircraft aluminum
and then anodized.
Designed for use with standard needles, tubes, grips, and power
supplies.
4. Linear armature motion.
Adjust the speed by the power supply to 3.000 ~ 10.000 stitches per minute through 7-13 volt.
It is Low vibration, low noise, easy handling and flexibility, no
tuning, no trouble.
It is the Bizarre from the Bavaria!