Active Member
|
[Ukraine]
Address: Room 310-2, Building 3, No.56 Lingzhi Road, Xinghe World, Xuanwu district, Nanjing 210028, China
Contact name:Coco chen
Jinhu Color Powder Coating Co.Ltd |
|
|
RAL1011 Brown beige antique Textured Powder Coating for lighting sets
Powder coating is a durable scratch and chemical resistant finish. Unlike the common liquid coatings, there are no solvents to evaporate in the powder coating process. A finished powder coated product will not have the microscopic holes in the paint that liquid coatings have.
Since there are no holes, a powder coated product has excellent corrosion protection which makes it ideal for items left out in the elements such as lawn furniture powdercoating.
Powder coating provides superior edge coverage and powder coated parts virtually have no drips, runs, or sags so your part will have a high quality and durable finish.
Formulated to create a very unique look in one step
Deep orange peel texture that is used to overcome surface defects and welded areas
Consumers can apply at a broad film range, using multiple style guns with a variety of gun settings
Can be successfully used for large parts and small parts
Reclamation friendly
Fitness equipment
Lawn mower decks
Shelving
Cabinets
Switch gears
Outdoor furniture
Playground equipment
| Item | Index |
| Color | Per standard panel &within the range negotiated by custom/supplier |
| Appearance(visual) | Smooth, slight orange peeled |
| Gloss(60°gauge head) | High gloss type≥85% Semi gloss type:51-84% Low gloss type:50-15% Matt type:<14% |
| Cured film thickness | 60-80μm |
| Impact resistance(drop hammer) | High gloss 50kg.cm pass ( both direct and reverse). Semi-, low gloss and matt: pass (direct), per custom’s request(reverse). |
| Pencil hardness | 2H without scratch |
| Adhesion(cross cut test) | 1mm 6x6 0 grade |
| Bending test(tapering spindle) | 3mm pass |
| Salt spray test | 500h <1 grade |
| Humid heat resistance | 500h <1 grade |
| Cupping test | ≥6mm |
The textured appearance may be influenced by spraying equipment from various manufacturers as well as by the difference in charging between electrostatic and Tribo/Airstatic application equipment.
| Item | Index | Note |
| Appearance(visual) | Homogeneous color without any agglomerate | |
| Fineness(180 mesh sieve residue) | <0.5% | Or per custom’s request |
| Fused flowability(mm) | 15℃±2℃ 20-70mm(tilt test) | |
| Gel time | 200 ± 2℃ 30-180s | |
| Curing conditions | 180℃ ± 2℃ 15-20min | Effective temperature |
