|
[China]
Trade Verify
Address: 2303 Century Square , Zhongnan Road , Wuhan ,China
Contact name:Frank
Wuhan Global Metal Engineering Co., Ltd |
|
Verified Suppliers
|
|
|
Type K J E Hot Runner Thermocouple RTD Temperature Sensor For Manifold Nozzle
Product Description:
The hot runner thermocouples are designed to suit all applications
where metal sheathed thermocouples are required. A complete array
of elements, transitions and process connections can be
individually selected for different application. With the
flexibility and small diameters in which they are available, the
hot runner thermocouples can be used in locations that are not
easily accessible. The unique design of the Hot Runner temperature
sensors are especially ideal for applications where the metal
sensor tip is fitted directly into a drilled hole or press fitted
into a grooved channel along the machined parts.
Specification:
Probe Outside Diameter | 0.5mm, 1.0mm, 1.5mm |
Calibration | Standard limits of error (Type K,J,T,E,N) Special limits or error (Type K,J,T,E,N)
|
Sheath Material | 304 Stainless Steel 316 Stainless Steel Inconel 600
|
Junction | Ungrounded , Grounded
|
Cable Insulation Description | 24 Gage, Stranded , Kapton 24 Gage, Solid, Kapton 24 Gage, Stranded, 24 Gage,Solid, 24 Gage,Stranded, Fiberglass 24 Gage, Solid ,Fiberglass |
Termination type | 50mm split leads and 15mm Bare Ends. 50mm split leads and spade lugs. Standard Male Plug (425F) Standard Female Jack(425F) Mini Male Plug(425F) Mini Female Jack(425F) Hi Temp Male Plug(800F) Hi Temp Female Jack(800F) |
Feature:
1. Moulded transition eliminates all possibilities of potential
defects when inserted, formed and used in Hot Runner systems.
2. The sensor can be formed or mounted into the process, or
with the use of a swivel nut or a spring-loaded bushing.
3. The thermocouple sensors are available with a variety of
sheath materials including stainless steel, corrosion resistant and
high temperature oxidation resistant alloys.
4. Extension cable are available in a variety of insulation
materials. These include kapton, fibreglass, PTFE or PVC with or
without stainless steel overbraid.
Application:
The Hot Runner Thermocouple has been designed to be used in below
area,
1. Hot Runner bushings, drops and nozzles
2. Hot Runner manifolds
3. Plastics and rubber industry
4. Moulds used in injection molding machines
5. For direct installation in the process
