|
[China]
Trade Verify
Address: No.1, Yixiang ,Liwu Industrial Park,Liwuyuan Village,Xihu District, Shilong Town,Dongguan 523325,Guangdong ,China
Contact name:James Lai
Dongguan Ampfort Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
Directly Heated HEL MF72 Negative Temperature Coefficient Thermistor 5D-11 5R 4A P=5mm
Application Of The Negative Temperature Coefficient Thermistor
- Switching power-supply,switch power,ups power
- Electronic energy saving lamps electronic ballast and all kinds of electric heater
- All kinds of picture tubes, monitors
- Bulb and other lighting lamps
- Agency Approvals
UL/CUL :E319959
CQC :10001052520
TUV :NO.B 001617 0001 Rev. 02
Size Of The Negative Temperature Coefficient Thermistor
| P/N | Dmax | Tmax | d ±0.05 | F ±1 | Straight Lead Wire Lmin |
| 5D-11 | 13 | 6 | 0.75 | 7.5/5 | 20 |
Materials Of The Negative Temperature Coefficient Thermistor
| Coating | Modified phenolic resin |
| Lead | CP Wire |
| Coating color | Black |
Electrical performance Of The Negative Temperature Coefficient Thermistor
| P/N | R25 (Ω) | Max steady state current(A) | Residual resistance (Ω) | Dissipation coefficient (mw/℃) | Thermal time constant | Max allowed Use capacity value 240V/120V(μF) | B value (K) | Work temperature (°C) | UL/CUL | CQC | TUV |
| 5D-11 | 5 | 4 | 0.16 | 14 | 50 | 470/1800 | 2700 | -40~ +175 | pass | pass | pass |
Thermistor has a good development prospect
Thermistors are widely used in household appliances, electric power
industry, communications, military science, aerospace and other
fields. They are widely used because of their unique properties.
They can not only be used as measuring components (such as
measuring temperature, flow, liquid level, etc.) , can also be used
as control components (such as thermal switches, current limiters)
and circuit compensation components. The advantages of thermistors
are:
1. Small in size, it can measure the temperature of voids, cavities
and blood vessels in living organisms that cannot be measured by
other thermometers;
2. Easy to use, the resistance value can be arbitrarily selected
between 0.1 ~ 100kΩ;
3. Wide operating temperature range, normal temperature devices are
suitable for -55℃～315℃, high temperature devices are suitable for
temperatures higher than 315℃ (currently up to 2000℃), low
temperature devices are suitable for -273℃～55℃;
4. Good stability and strong overload capacity;
5. The sensitivity is high, and its temperature coefficient of
resistance is more than 10 to 100 times larger than that of metal;
6. It is easy to process into complex shapes and can be
mass-produced.
These advantages make thermistors should be widely used, and the
development prospects are extremely broad.
The relationship between the size of the NTC thermistor and the filter capacitor
The size of the NTC thermistor to choose is determined by the size of the filter capacitor. The size of the NTC thermistor is determined, and there are strict requirements on the size of the filter capacitor that is allowed to be connected. This value is also related to the maximum rated voltage. In power supply applications, the power-on surge is generated by the charging of the capacitor, so the capacity of the NTC thermistor to withstand surge current is usually evaluated by the allowable access capacitance under a given voltage value.
The size of the NTC thermistor is determined, and the maximum energy it can withstand has been determined. According to the energy consumption formula E=1/2×CV2 of the resistance in the first-order circuit, it can be seen that the allowable access capacitance value is the same as the rated value. The square of the voltage is inversely proportional. All in all, the larger the input voltage, the smaller the maximum capacitance allowed to be connected, and vice versa.
