|
[China]
Trade Verify
Address: No.1, Yixiang ,Liwu Industrial Park,Liwuyuan Village,Xihu District, Shilong Town,Dongguan 523325,Guangdong ,China
Contact name:James Lai
Dongguan Ampfort Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
KSD306 KSD307 KSD308 Temperature Thermal Control Switch 95degrees 250V 30A 40A 45A 50A 60A Bimetal Thermostat
Applications Of The KSD306 KSD307 KSD308 Temperature Thermal Control Switch
Suitable for electric water heaters, electric heating equipment,
electric welding machines, steam heaters.
Product performance and principie Of The KSD306 KSD307 KSD308
Temperature Thermal Control Switch
KSD307 series thermostat is a double-metal contact temperature
sensitive temperature relay with a fully enclosed casing. The metal
sheet is bent according to the principle of thermal expansion and
contraction, so as to quickly jump and turn on within a preset
temperature range. The electrical appliance acts as a safety
protection, and its disconnection temperature and reset temperature
can be made according to the needs of the customer.
Attention Of The KSD306 KSD307 KSD308 Temperature Thermal Control Switch
● When installing by contact temperature method, the metal cover
should be close to the mounting surface of the controlled
appliance.
● Do not deform the cover surface during installation to avoid
affecting performance.
● In order to prevent leakage, the liquid should not be allowed to
penetrate into the temperature controller during use, so as not to
affect the electrical reliability.
● This product is a bipolar wiring type. When used, follow the
markings and connect correctly.
● The product should be stored in a warehouse with a relative
humidity of less than 90% and an ambient temperature of 40 ° C
below, which is ventilated, clean, dry and free of corrosive gases.
Technical parameters Of The KSD306 KSD307 KSD308 Temperature
Thermal Control Switch
| Electrical characteristics: | AC250V, 50-60Hz, 45A |
| Maximum ambient temperature: | 180°C |
| Operating temperature range: | 40°C-150°C |
| Temperature tolerance: | ±3, ±5 (can be made according to customer needs) |
| Durability: | CQC > 6000 times |
| Normal insulation resistance: | >300 MΩ |
| Normal contact resistance: | ≤50 mΩ |
| Normal electrical strength: | AC1500V lasts for 1min without breakdown or flicker |
| Shell protection grade: | IP00 |
| Insulation material PTI value: | PTI175 |
Dimension Of The KSD306 KSD307 KSD308 Temperature Thermal Control Switch
Advantages Of The KSD306 KSD307 KSD308 Temperature Thermal Control Switch
High durability
High precision.
High loading capacity
No breakdown, no flashover.
Every product will be tested, extremely high temperature pass rate.
Other Products Of The KSD306 KSD307 KSD308 Temperature Thermal Control Switch
