|
[China]
Trade Verify
Address: No.1, Yixiang ,Liwu Industrial Park,Liwuyuan Village,Xihu District, Shilong Town,Dongguan 523325,Guangdong ,China
Contact name:James Lai
Dongguan Ampfort Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
Industrial PTC Limit Temperature Sensors 60°C D1052 Probe Assemblies 100Ω Max. 30V
Applications Of The PTC Limit Temperature Sensors 60°C
1. Switch power supply.
2. Electronic equipment (motor, transformer, etc)
3. Power parts.
4. Limit temperature sensor
Features Of The PTC Limit Temperature Sensors 60°C
1) Sensor with epoxy resin coating
2) Tinned leads
3) Metal tag for easy mounting
4) Lead-free terminals
5) Characteristics for sensing temperatures
6) Metal tag permits good thermal coupling and thus short
response time
7) RoHS-compatible
Dimension in mm Of The PTC Limit Temperature Sensors 60°C
| NO | COMPONENT | MATERIAL AND SPECIFICATIONS | Q'TY | REMARK |
| 2-1. | Housing | Tin Plated Copper | 1 | |
| 2-2. | Element | PTC DISK | 1 | |
| 2-3. | Coating | Epoxy Resin | Black | |
| 2-4. | Wire | CP Wire (ɸ 0.4mm) | 2 |
Electrical Performance Of The PTC Limit Temperature Sensors 60°C
| Part Number | PTB02S6101FR1 |
| Sensing Temperature Ts.(℃) | 60 |
| Resistance at 25℃ (Ω ) | ≦100 |
| Ts-5℃(Ω ) | ≦570 |
| Ts+5℃(Ω ) | ≧570 |
| Ts+23℃(KΩ ) | ≧10 |
| Max. Operating Voltage (Vdc) Max. | 30 |
| Max. Permissible Current (ImA) Max. | 100 |
| Operating Temp. Range (℃) | -20 ～ 105 |
Handling Of The PTC Limit Temperature Sensors 60°C
PTCs must not be dropped. Chip-offs must not be caused during
handling of PTCs.
The ceramic and metallization of the components must not be touched
with bare hands. Gloves
are recommended.
Avoid contamination of thermistor surface during handling.
Soldering (where applicable) Of The PTC Limit Temperature Sensors 60°C
Use rosin-type flux or non-activated flux.
Insufficient preheating may cause ceramic cracks.
Rapid cooling by dipping in solvent is not recommended.
Complete removal of flux is recommended.
Standard PTC heaters are not suitable for soldering.
Storage Method Of The PTC Limit Temperature Sensors 60°C
1. In the process of storage and transportation, per stack height
is not more than 4 CTN products.
2. Available with all transport method, but avoid the rain, snow of
direct or indirect leaching and mechanical damage.
3. Products should be stored in the temperature of environment - 10
℃ / + 40 ℃, relative humidity is not more than 75%,
environment should not have acid, alkali and corrosion gas or
radioactive source.
4. Period of Storage:1 year.
Related Products Of The PTC Limit Temperature Sensors 60°C
PTC Thermistors Selection guide
1) PTC thermistors for overcurrent protection
2) PTC thermistors for overcurrent protection and as inrush current limiters
3) PTC thermistors as inrush current limiters in housing
4) PTC thermistors for telecom applications
5) PTC thermistors for switching applications (e.g. lighting, general-purpose)
6) PTC thermistors for motor starting
7) PTC thermistors as point level sensors
8) PTC thermistors for motor protection
9) PTC thermistors as limit temperature sensors
10) PTC thermistors as heating elements
