|
[China]
Trade Verify
Address: No.1, Yixiang ,Liwu Industrial Park,Liwuyuan Village,Xihu District, Shilong Town,Dongguan 523325,Guangdong ,China
Contact name:James Lai
Dongguan Ampfort Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
G12 Wall Mounted Tube Pipe Clamp Type NTC Thermistor Temperature Sensor Probe 50K
I Description Of The G12 Wall Mounted Tube Pipe Clamp Type NTC Thermistor Temperature Sensor
NTC Temperature Sensor is a sensing element that send back the
results to the system.
It is also called thermistor or probe. Its principle is the
resistance decreases rapidly when the temperature rises.
NTC(Negative Temperature CoeffiCient)refers to thermistor
phenomenon and material with negative temperature coefficient, and
the resistance decreases exponentially when the temperature rises.
NTC Temperature sensors are widely used in household, automotive,
industrial, medical and other industries.Generally speaking,
temperature sensors are used in most electrical and electronic
products that require temperature feedback.
II Application Of The G12 Wall Mounted Tube Pipe Clamp Type NTC Thermistor Temperature Sensor
1. Heater, Warmer, Automobile air conditioners, Refrigerators,
Freezers,
2. Water heaters, Gas boiler, Electric kettles, Wall-hung gas
boiler, Water dispensers,
3. Toaster, Microwave oven, Air dryer, Roasting pan, Induction
cooker, Electric hot plate,
4. Iron, Garment steamer, Hair straighten, Coffee maker, Coffee
pot,
6. Rice cooker, Incubator temperature control, Egg boiler, etc.
III Dimension Of The G12 Wall Mounted Tube Pipe Clamp Type NTC Thermistor Temperature Sensor
IV Material Lists Of The G12 Wall Mounted Tube Pipe Clamp Type NTC Thermistor Temperature Sensor
| NO. | Name | Specification/Model |
| 2-1. | Lead Wire | UL3266-26AWG*2P 125℃ 300V (Black) L=150±10mm |
| 2-2. | Thermistor | R25=50KΩ±1% B25/50=3950K±1% MF58R |
| 2-3. | Pipe clamp | G12Pipe clamp Manganese steel nickel plating |
| 2-4. | Molded case | P66 Black Nylon 12#Type |
| 2-5. | Epoxy resin | J105/J106/J-05X G108/GU01/GU-Mz Black |
| 2-6. | Terminal | SM-PT Terminal |
| 2-7. | Glue base | SM-2P Black |
| 2-8. | Silicone | 704 One-component silicone |
| 2-9. | Copper sheet | 18*12*T0.1 Phosphorus copper sheet |
| 2-10. | Film | Polyimide film |
| 2-11. | Thermal grease | Non-dry thermal grease |
| 2-12. | Sleeve | ø1.0 Black heat shrinkable sleeve 125℃ |
| 2-13. | Cable skin | Cable skin 18mm |
V Electrical Parameters Of The G12 Wall Mounted Tube Pipe Clamp Type NTC Thermistor Temperature Sensor
| NO | Item | Sign | Test Conditions | Min. | Normal value | Max. | Unit |
| 3-1. | Resistance at 25℃ | R25 | Ta=25±0.05℃ PT≦0.1mw | 49.5 | 50 | 50.5 | KΩ |
| 3-2. | B Value | B25/50 | 3910.5 | 3950 | 3989.5 | k | |
| 3-3. | Dissipation factor | σ | Ta=25±0.5℃ | 3.0 | / | mw/℃ | |
| 3-4. | Time constant | τ | Ta=25±0.5℃ | / | / | 8.0 | sec |
| 3-5. | Insulation resistance | / | 500VDC | 100 | / | / | MΩ |
| 3-6 | High-voltage Insulation Test | / | 1500VAC | 5 | Sec | ||
| 3-7 | Operating temp.range | / | / | -30 | / | +125 | ℃ |
VI Advantages Of The G12 Wall Mounted Tube Pipe Clamp Type NTC Thermistor Temperature Sensor
1. Small quantity is accepted.
2. Well and strict quality control.
3. Good quality is assured by advanced manufacturing technique.
4. All products will be checked by our quality-control department.
5. Customized design. OEM & ODM is accepted.
6. We have series ex-factory tests before shipment, such as pulling
test,
high & low temperature test, drop test, temperature cycling experiment etc.
