|
[China]
Trade Verify
Address: No.1, Yixiang ,Liwu Industrial Park,Liwuyuan Village,Xihu District, Shilong Town,Dongguan 523325,Guangdong ,China
Contact name:James Lai
Dongguan Ampfort Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
Metal Plastic Bimetal Temperature Switch Thermostat Control KSD9700 90C NC 250V 5A
I Benefits Of The Bimetal Temperature Switch
II Size Of The Bimetal Temperature Switch (mm)
KSD-9700 series thermal protector consists of dish shape high
sensitive bimetallic elemeng,movable contact-head,
static contact-piece,soleplate,outer case,ghermal resistant lead and so on.When operation,the bimetallic element is
in free state and movable contact-head and static contace-piece are closed and the circuit is on.When the electric
appliance is in operation is in operation and produces heat caused by some troubles and temperature is raised to
the rated action temperature of the product,the bimetallic element produces inner stuess and acts quickly and pushes
the movable contact-head and make the vontact point off and the power supply is rurned off the electric appliance stop.
in this way the thermal protection is made.When the temperature of electric appliance to be protected is dropped to the
rated reset temperature.The bimetallic element restores to its primary state and contact point is closed .The electric
appliance restores its work.The product has many advantages such as small in resistor,puick in temperature feeling,
fast in action.Safe and reliable.compact and so on.
III Electrical Ratings Of The Bimetal Temperature Switch
| Item description | thermal protector |
| Model | KSD9700 |
| Switch Type | normally closed |
| Material | metal/plastic shell |
| Size | metal case 20 mm * 7.4 mm * 3.8 mm Plastic shell 20 mm * 8.0 mm * 4.0 mm |
| Rated voltage | 250V |
| Overload current | 5A |
| Action temperature | 20 degrees - 180 degrees |
| The rated power flow | DC12V / 12 a, DC24V / 10 a AC125V / 8 a, AC250V / 5 a |
| Normal electric strength | 800 v |
| Normal contact resistance | 50 m Ω |
| Insulation resistance | 100 m Ω |
| The response rate | 1 ℃ / min |
| Life time number | more than 10000 times |
| Action temperature | 20 ° C to 180 ° C (error of plus or minus 3 ° C / + 5 ° C) |
| Reset temperature | 10 ° C to 140 ° C (error 15 ° C or less) |
IV Description Of The Bimetal Temperature Switch
A meat thermometer is a unit which will measure core temperature of meats while cooking.
It will have a metal probe with a sharp point which is pushed into the meat. It should be
connected by a flexible heat-resistant silicone cable to oven control board & display.
Some brand models have programmed for auto cooking with the meat probe.
V Application Of The Bimetal Temperature Switch
VI Test Method Of The Bimetal Temperature Switch
Sample is connected to the fixture of the equipment,and placed into
the test equipment (Hot current of air in the space of test
should be equipped with a stirrer and temperature
is controllable).A detect current about 10mA(no more then
100mA)is passed through the sample and a thermometer is placed
junction to the sample to monitor the opening temperature .The
temperature of the test equipment is raised at the rate of 0.5～1℃
per
minute until the sample functioned.
VII Packaging Of The Bimetal Temperature Switch
Bulk,500pcs per bag,6000pcs per carton,11kg per carton
VIII Certifications Of The Bimetal Temperature Switch
OCP Overtemperature Protection
Temperature Sensor
Thermal Fuse
Thermal Protector
Temperature and humidity sensor
Frequently Asked Question FAQ
Q: Are you manufacturer ?
A: Yes, we are manufacturer and distributor of famous brand such as Littelfuse.
Q: Which city does your factory in ?
A: Dongguan City,Guangdong Province, China
Q: May i know your working time ?
A: Official working time is 8:00 ~ 12:00 AM, 1:30 ~ 5:30 PM.However, sales in our overseas department will do overtime working and 7x24hours online.
Q: Do you accept custom made ?
A: Yes, we are professional in customization model based on rich experiences and professional engineering.It’s helpful if you can provide drawing or detailed specification should be.
Q: May i know your lead time ?
A: Lead time is 7 days for standard model and exact lead time depend on detailed requirements if special model selected.
Q: May i receive samples before place order ?
A: Yes, generally samples is free but sample cost should be charged if quantity is too many ,product cost is too much or new mould fee required.
Q: What’s your payment terms ?
A: T/T, Paypal etc.
Q: What’s currency you can accept ?
A: Mainly US dollars and Chinese Yuan
Q: Does your package method safe for transportation ?
A: Yes, our package would be 10~1000pcs per plastic bag -> multiple bags per box -> multiple boxes per carton and it is safe for express/air/boat shipment.
Q: What’s your MOQ ?
A: In general , MOQ is 1000pcs and different for special model.
