|
[China]
Trade Verify
Address: YUANHUA, HAINING, ZHEJIANG, CHINA
Contact name:Terry White
JIAXING PASSION NEW ENERGY TECHNOLOGY CO., LTD. |
|
Verified Suppliers
|
|
|
CE Approved Solar Thermal 14mm Condenser Heat Pipe Solar Collector Aluminum Alloy Frame
Product Description:
The vacuum solar collector is device that absorbs thermal energy from the sun and converts it into usable heat.
The heat is normally absorbed by water, or a freeze resistant water mix, which can then be used to supplement hot water heating, space heating and even space cooling via use of an absorption chiller or dessicant cooler technology.
Features:
Manifold (interior): thickness1.0-1.2 Copper pipe
Manifold Casing Material: thickness 2.0mm Aluminum alloy (Black or silver)
Insulation: high density rock wool
Frame Material 2.0-3.0mm thickness Aluminum alloy
Vacuum tube dimension: ø58mm* 1800mm
Coating of vacuum tube: CU-SS-ALN/ALN.
No of vacuum tube: 18pcs
Daily output (50 oC ): 120-180L
Daily efficiency: average ≥55%, ≥45% in winter
Heat pipe: anti-freezing > -35 centigrade
Optimal installation angle 20-70°Vertical
Test Pressure: 1.2 Mpa (12 bar)
Working pressure: 0.6 Mpa (6 bar)
Working principle:
A solar thermal collector is a vacuum tube solar collector designed to collect heat by absorbing sunlight.
The simpler solar collectors are typically used for supplemental space heating in residential and commercial buildings.
A vacuum tube solar collector is a device for converting the energy in solar radiation into a more usable or storable form.
The energy in sunlight is in the form of electromagnetic radiation from the infrared (long) to the ultraviolet (short) wavelengths.
The solar energy striking the Earth's surface depends on weather conditions, as well as location and orientation of the surface, but overall, it averages about 1,000 watts per square meter under clear skies with the surface directly perpendicular to the sun's rays.
Solar Keymark, SRCC Certified: EN12975, OG-100
High - Performance, High Efficiency
Top Quality Materials & Construction
Specifications:
| Physical parameters | |
| Gross length | 1.960 m |
| Gross width | 1.475 m |
| Gross Height | 0.135 m |
| Gross area | 3.543 m2 |
| Aperture area | 2.249 m2 |
| Absorber area | 1.929 m2 |
| Weight empty | 79 kg |
| Fluid capacity | 1.5 l |
| Casing and Frame Specifications | |
| Header Casing Material | Aluminum alloy |
| Frame Material | Aluminum alloy |
| Manifold Insulation Material | Rock Wool |
| Internal Manifold Pipe Material | 35 mm Copper - Scheduel M |
| Sealing Material | Silicone |
| Installation Angle Range | 15C - 90C |
| Manifold / Operation Specifications | |
| Recommended Manifold Fluid Content | Water or Water / Glycol |
| Maximum Operating Pressure | 12 bar |
| Recommend Flow Rate | 160 l/h |
Quality Guarantee:
We provide 5years warranty of solar collector and shipment with 1% spare parts.
We can send the parts free on condition that there is any breakdown with convincing evidence.
1% spare parts include:
Wiper scraper seal
Tube holder
Screws & screw caps
QC Team:
A QC team with more than 10years’ experience and technical personnel, to ensure 100% products checking.
Material:
Strictly control of material purchasing and using, meet international requested standards.
Semi-finished products inspection:
Product inspection before 100% finished, such as visual inspection, leaking and pressure testing, comprehensive safety test and so on.
Production line test:
With work team or data engineer who will inspect machines and lines at fixed period.
Finished product inspection:
Quality and property test before products are packed and loaded.
Contact:
We will reply your email or fax within 24hours
You can call us at any time if there is any question on our production
