Active Member
|
[China]
Address: Xinhua Cun, Chunjiang Town, New-north District, Changzhou, Jiangsu China PRC 213000
Contact name:Wendy zhang
Jiangsu ChangSheng Electric Appliance Co., Ltd |
|
|
Metal Case Induction Electric Motor Circuit Protector / Thermal Overload Protector
Applications:
Description:
Changsheng BR-A2D series motor protector is built to meet almost
any requirement of protection in a wide range of small motors,
small transformers, solenoids, and more. This compact motor
protector is the best solution to protect the wide variety of
motors under 1 Hp used in industrial and domestic appliances
against locked rotor and overload situations.
This motor protector consists of a metal SPCCC housing that holds
and protects the inner components against infiltration as well as
mechanical deformation. In single–phase motors, the BR-A2D can be
mounted directly in the main circuit to serve as an on– or
in–winding protector.
Specifications:
Contact capacity | 125Vac/10A, 250Vac/6A, 24Vdc/10A |
The bimetal carries current or not | Not |
Cycles life | 6,000 cycles |
Open temperature | 50°C to 150°C in increments of 5°C |
Temperature Tolerance | ±5°C |
Differential Temperature | depending on open temperature |
Seal | Epoxy resin |
Contact resistance | ≤50 m |
Insulation resistance | The resistance between the leads and insulation sleeve is >100 M with 500 VDC at 25 °C. |
Lead wire pull strength | 30 N applied from lead to lead for 5sec. No slip-off or rupture |
Competitive Advantage:
1. The strongest Chinese manufacturer, ISO 9001and ISO14001 recognized. |
2. Compact, miniature size. |
3. UL,VDE,CE CQC Approved. |
4. Individually temperature checked on modern, custom-designed equipments from Japan. |
5. Snap–action disc, normally on. |
6. Epoxy resin |
7. Bimetal discs carry circuit current, so it is current and temperature double sensitivity for maximum design flexibility and application |
BR-A2D with standard metal case
BR-A2D with enforced metal case
Note: wall thickness of the enforced case is 0.5m minimum and it will withstand 30MPa injection pressure (no deformation)
①Metal case ②Plate ③Bimetallic disc ④Spring ⑤Movable contact ⑥Stationary piece ⑦Base ⑧Epoxy resin ⑨Lead wire ⑩Sleeve
