|
[China]
Trade Verify
Address: Building 6-1, Woer Industrial Zone, No.53, Longtian Street, Pingshan District, Shenzhen, China
Contact name:Subby
Cyg Tefa Co., Ltd. |
|
Verified Suppliers
|
|
|
Thin PE foam is one the Irradiated Polyehtylene foam. it's
thickness between 0.5mm to 3mm thick. and it can be use to make
into PE foam tape.
Available in elastic & easy tear PE foam. Produced by coating
acrylic solvent adhesive on the both sides of the foam and
separated by release paper. It adheres well to a variety of
surfaces and exhibits excellent holding power.
Irradiated Crosslinked polyethylene foam(IXPE FOAM) is very fine celled microcellular foam. Irradiated crosslinked foam is used for medical applications, heart forming, and high end protective packaging and consumer products. This foam can actually be printed on very clearly.
Specifications
Item | 5Times | 10Times | 15Times | 20Times | 25Times | 30Times | 35Times | 40Times |
Density (kg/m3) | 200 | 100 | 67 | 50 | 40 | 33 | 28 | 25 |
Hardness | 70 | 55 | 45 | 35 | 30 | 25 | 20 | 18 |
Tensile Strength |
Colors: | As requests. we can provide the color sample for customer's
confirmation. |
Max Width | 0-1600mm |
Thickness | 0.3mm-100mm, we can laminated foam as requests. |
Flame retardant | Foam can be flame retardant as requests. |
Foam surface | Can do corona and press polish as customers' requests. |
FQA
Polyethylene foam is closed-cell, meaning it consists of cells so tightly packed together that it gives the appearance of one uniform structure.
The reality is that the individual cells within polyethylene foam do not physically connect to one another.
This cellular formation is similar to fish caught in a fisherman's net.
Low-density polyethylene foam has numerous applications because of its many desirable properties including water-resistance, chemical resistance, energy-absorbance, buoyancy and cushioning characteristics. Compressive strength is greater in denser foams, decreasing as density decreases.
Low-density foams tend to exhibit more compressive creep, meaning they become less thick over time than higher-density foams.
Our PE foam density is between 25 kg/m3 and 240 kg/m3
We can provide the best solution for you according to the
application, Density, hardness, thickness.And The free sample is
available for your confirmation and text
First we discuss foam products details by email or TM.
Then we issue you a PI for your confirmation. You will be requested
to do prepaid full payment or deposit before we go into production.
After we get the deposit, we start to process the order. usually
takes 7-15days if we don't have the items in stock.
Before production has been finished, we will contact you for
shipment details, and the balance payment. After payment has been
settled, we start to prepare the shipment for you.
After you confirm our PI, we will request you to pay. T/T (ABC bank) and Paypal, Western Union are the most usual ways we are using for freight fees of PE foam samples.
Replacement. If there are some defective foam products, we usually credit to our customer or replace in next shipment.
We have spot inspection and finished product inspection of our foam materials.We check the PE foam materials when they go into next step production procedure.
