|
[China]
Trade Verify
Address: Building 6-1, Woer Industrial Zone, No.53, Longtian Street, Pingshan District, Shenzhen, China
Contact name:Subby
Cyg Tefa Co., Ltd. |
|
Verified Suppliers
|
|
|
Closed Cell Xlpe Construction Heat Insulation Foam Roof Heat Environmentally Friendly
1) Waterproof,clean, light, flexible,non-absorbent surface
2) Recyclable, environmentally friendly
3) Easily install, cut, stapled, nailed or glued into place
4) Effective in extreme temperatures both hot and cold
5) Safe to handle with no special clothing or breathing Equipment
6) Easy to cut and install, without the protective clothing or
respirators during installment.
7) Does not support the growth of fungus or mold.
8) Vapor and radon retarder
9) Not affected by moisture or humidity
IXPE has the properties of heat preservation, noise absorption,
resistance upon chemics and
climate.It can beeither used in the heat preservation layer of home
and mechanical air condition,
or made intothe model shape of the air condition at random which
has fine appearance and good
property due to its good properties of resistance upon heat and
good modeling.
Application
High reflective foam insulation products
CYG Insulation foam is a flexible thermal insulation material
made from closed cell, cross-linked polyethylene foam. The special
cross-linking utilized in the production of the material, as well
as, its closed cell structure, results in insulating properties
that are superior to fiberglass, rubber based and non
cross-linked products.
A very low thermal conductivity value(K), and negligible water
absorption and vapour transmission rates reflect in its superior
energy saving performance, in variety of environments.
1. excellent heat insulation performance:
low thermal conductivity, <0.040W/m · k, less than polystyrene,
similar to polyurethane, as the excellent insulation, heat
insulation materials;
2. high apparent density:
apparent density reach to 28±2kg/m ³,superior to polyurethane and phenolic foam; reduces the building's weight, load of the building and cost of the structure.also easy and fast to construct, and improve efficiency;
3. qualified combustion performance:
combustion performance reach the B2 level of building and
decoration material class, the same as polystyrene;
4. good corrosion resistance and ageing resistance: resistance to
acid and organic solvents,long-term exposure to the Sun, minor
aging, special anti-aging treatment but can be done;
5. superior production technology to meet different needs:
continuous and controllable production process meets different
requirements of the length and width, effectively reducing the
waste during transportation and installation.
Performance
Fir retardancy
This product has fire-blocking and smoke-reducing property, when
burned, its density is very low and doesn't melt, without any small
fire ball left and with the merit of self-extinguishing.
According to the standard of GB/T 8624 Method for grading
flammability of construction material, this is the flame resistant
product of grade B1 enabling to secure the satiety
Other characteristics
Good pliability
Dew resistance
Easy to fabricate
Anti-slip/anti-skidding
Extremely low odor
Non toxic Flexibility
Safety and eco-friendly
Anti-aging
Weather resistance
Cost-effective
Product structure
About CYG
CYG TEFA Co., Ltd has 17 years of production experience. We're the biggest and the most professional irradiation cross-linked polyethylene conductive foam manufacturer in China and has the most complete cross-linked polyethylene foam products.
Our main products are Cross-linked PE foam material, IXPE foam, XPE foam, Conductive IXPE foam; ESD foam tray, ESD packing material; Beach mat, camping mat, sleeping mat, yoga mat; etc.
CYG TEFA offers the best solution for polyethylene foam production
based on long experience in the developing ,manufacturing PE
foam.All the service are focused on quality of products and
satisfied our customer.
We are committed to developing,manufacturing and selling
cross-linked PE foam.
Over the years,we have developed 2 production bases in Shenzhen,Hangzhou,and 17 production lines of all kinds,with annual production capacity of 6000 tons
All our products can be used for thermal insulation,waterproof,shockproof,etc. and also our products get the UL, ISO, SGS, Rohs, Reach , CE approval.
Our clients are iPhone, Samsung, Gree, Haier, TCL, Adidas, Nike, Flextronics, General Motors, BYD, PPL, etc.
FQA
What is closed-cell?
Polyethylene foam is closed-cell, meaning it consists of cells so tightly packed together that it gives the appearance of one uniform structure.
The reality is that the individual cells within polyethylene foam do not physically connect to one another.
This cellular formation is similar to fish caught in a fisherman's net.
Why choose Low-density polyethylene foam?
Low-density polyethylene foam has numerous applications because of its many desirable properties including water-resistance, chemical resistance, energy-absorbance, buoyancy and cushioning characteristics. Compressive strength is greater in denser foams, decreasing as density decreases.
Low-density foams tend to exhibit more compressive creep, meaning they become less thick over time than higher-density foams.
How can I know the suitable foam density I need?
Our PE foam density is between 25 kg/m3 and 330 kg/m3
We can provide the best solution for you according to the
application, Density, hardness, thickness.And The free sample is
available for your confirmation and text
What's the order procedure?
First we discuss foam products details by email or TM.
Then we issue you a PI for your confirmation. You will be requested
to do prepaid full payment or deposit before we go into production.
After we get the deposit, we start to process the order. usually
takes 7-15days if we don't have the items in stock.
Before production has been finished, we will contact you for
shipment details, and the balance payment. After payment has been
settled, we start to prepare the shipment for you.
How can I pay you?
After you confirm our PI, we will request you to pay. T/T (ABC bank) and Paypal, Western Union are the most usual ways we are using for freight fees of PE foam samples.
How do you take care when your clients received defective foam products?
replacement. If there are some defective foam products, we usually credit to our customer or replace in next shipment.
How do you check all PE foam on the production line?
We have spot inspection and finished product inspection of our foam materials.We check the PE foam materials when they go into next step production procedure.
